The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage Performance
Abstract
Porous structure design is generally considered to be a reliable strategy to boost ion transport and provide active sites for disordered carbon anodes of Na‐ion batteries (NIBs). Herein, a type of waste cork‐derived hard carbon material (CC) is reported for efficient Na storage via tuning the pore species. Benefiting from the natural holey texture of this renewable precursor, CCs deliver a novel hierarchical porous structure. The effective skeletal density test combined with small angle X‐ray scattering analysis (SAXS) is used to obtain the closed pore information. Based on a detailed correlation analysis between pore information and the electrochemical performance of CCs, improving pyrolysis temperature to reduce open pores (related to initial capacity loss) and increase closed pores (related to plateau capacity) endows an optimal CC with a high specific capacity of ≈360 mAh g−1 in half‐cells and a high energy density of 230 Wh kg−1 in full‐cells with a capacity retention of 71% after 2000 cycles at 2C rate. The bioinspired high temperature pore‐closing strategy and the new insights about the pore structure–performance relationship provide a rational guide for designing porous carbon anode of NIBs with tailored pore species and high Na storage capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Capacitive Energy Storage in Nanostructured Carbon–Electrolyte Systems
Simon, P., & Gogotsi, Y. (2013) · Accounts of Chemical Research · doi:10.1021/ar200306b · Cited by 1,486
Lithium Storage in Carbon Nanostructures
Kaskhedikar, N. A., & Maier, J. (2009) · Advanced Materials · doi:10.1002/adma.200901079 · Cited by 1,161
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Self-citationCarbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
Self-citationBiomass derived carbon for energy storage devices
Wang, J., Nie, P., Ding, B., Dong, S., Hao, X., Dou, H., & Zhang, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08742f · Cited by 809
Lu, P., Sun, Y., Xiang, H., Liang, X., & Yu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702434 · Cited by 691
Cited by
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Self-citationTang, Z., Zhang, R., Wang, H., Zhou, S., Pan, Z., Huang, Y., Sun, D., Tang, Y., Ji, X., Amine, K., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39637-5 · Cited by 846
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective
Chu, Y., Zhang, J., Zhang, Y., Li, Q., Jia, Y., Dong, X., Xiao, J., Tao, Y., & Yang, Q. (2023) · Advanced Materials · doi:10.1002/adma.202212186 · Cited by 602
Ether-based electrolytes for sodium ion batteries
Li, Y., Wu, F., Li, Y., Liu, M., Feng, X., Bai, Y., & Wu, C. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00948f · Cited by 597
Self-citationUnderstanding of the sodium storage mechanism in hard carbon anodes
Chen, X., Liu, C., Fang, Y., Ai, X., Zhong, F., Yang, H., & Cao, Y. (2022) · Carbon Energy · doi:10.1002/cey2.196 · Cited by 527
Origin of fast charging in hard carbon anodes
Li, Y., Vasileiadis, A., Zhou, Q., Lu, Y., Meng, Q., Li, Y., Ombrini, P., Zhao, J., Chen, Z., Niu, Y., et al. (2024) · Nature Energy · doi:10.1038/s41560-023-01414-5 · Cited by 490
Self-citationUnderstanding of Sodium Storage Mechanism in Hard Carbons: Ongoing Development under Debate
Sun, N., Qiu, J., & Xu, B. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200715 · Cited by 474
Heteroatom-doped carbon-based materials for lithium and sodium ion batteries
Yuan, Y., Chen, Z., Yu, H., Zhang, X., Liu, T., Xia, M., Zheng, R., Shui, M., & Shu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.027 · Cited by 455
Sun, F., Wang, H., Qu, Z., Wang, K., Wang, L., Gao, J., Gao, J., Liu, S., & Lu, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002981 · Cited by 390
Self-citationSieving carbons promise practical anodes with extensible low-potential plateaus for sodium batteries
Li, Q., Liu, X., Tao, Y., Huang, J., Zhang, J., Yang, C., Zhang, Y., Zhang, S., Jia, Y., Lin, Q., et al. (2022) · National Science Review · doi:10.1093/nsr/nwac084 · Cited by 356
Carbon Anode Materials: A Detailed Comparison between Na‐ion and K‐ion Batteries
Zhang, L., Wang, W. (., Lu, S., & Xiang, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003640 · Cited by 345
Xu, R., Yi, Z., Song, M., Chen, J., Wei, X., Su, F., Dai, L., Sun, G., Yang, F., Xie, L., et al. (2023) · Carbon · doi:10.1016/j.carbon.2023.02.004 · Cited by 323
Hard carbon for sodium-ion batteries: progress, strategies and future perspective
Wu, C., Yang, Y., Zhang, Y., Xu, H., He, X., Wu, X., & Chou, S. (2024) · Chemical Science · doi:10.1039/d4sc00734d · Cited by 320
Alvira, D., Antorán, D., & Manyà, J. J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137468 · Cited by 309
Tang, Z., Zhou, S., Huang, Y., Wang, H., Zhang, R., Wang, Q., Sun, D., Tang, Y., & Wang, H. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00178-y · Cited by 275
2021 roadmap for sodium-ion batteries
Tapia-Ruiz, N., Armstrong, A. R., Alptekin, H., Amores, M. A., Au, H., Barker, J., Boston, R., Brant, W. R., Brittain, J. M., Chen, Y., et al. (2021) · Journal of Physics: Energy · doi:10.1088/2515-7655/ac01ef · Cited by 273
Self-citationGuo, Z., Xu, Z., Xie, F., Jiang, J., Zheng, K., Alabidun, S., Crespo‐Ribadeneyra, M., Hu, Y., Au, H., & Titirici, M. (2023) · Advanced Materials · doi:10.1002/adma.202304091 · Cited by 264
Self-citationElectrode–Electrolyte Interfacial Chemistry Modulation for Ultra‐High Rate Sodium‐Ion Batteries
Tang, Z., Wang, H., Wu, P., Zhou, S., Huang, Y., Zhang, R., Sun, D., Tang, Y., & Wang, H. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202200475 · Cited by 263
Matei Ghimbeu, C., Beda, A., Réty, B., El Marouazi, H., Vizintin, A., Tratnik, B., Simonin, L., Michel, J., Abou‐Rjeily, J., & Dominko, R. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202303833 · Cited by 257
Metadata
- Authors
- Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., & Hu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-11-13
- Volume
- 9
- Issue
- 48
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2983739955
- Cited by
- 643
- References
- 35
- FWCI
- 12.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.