The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage Performance
Abstract
Porous structure design is generally considered to be a reliable strategy to boost ion transport and provide active sites for disordered carbon anodes of Na‐ion batteries (NIBs). Herein, a type of waste cork‐derived hard carbon material (CC) is reported for efficient Na storage via tuning the pore species. Benefiting from the natural holey texture of this renewable precursor, CCs deliver a novel hierarchical porous structure. The effective skeletal density test combined with small angle X‐ray scattering analysis (SAXS) is used to obtain the closed pore information. Based on a detailed correlation analysis between pore information and the electrochemical performance of CCs, improving pyrolysis temperature to reduce open pores (related to initial capacity loss) and increase closed pores (related to plateau capacity) endows an optimal CC with a high specific capacity of ≈360 mAh g−1 in half‐cells and a high energy density of 230 Wh kg−1 in full‐cells with a capacity retention of 71% after 2000 cycles at 2C rate. The bioinspired high temperature pore‐closing strategy and the new insights about the pore structure–performance relationship provide a rational guide for designing porous carbon anode of NIBs with tailored pore species and high Na storage capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Capacitive Energy Storage in Nanostructured Carbon–Electrolyte Systems
Simon, P., & Gogotsi, Y. (2013) · Accounts of Chemical Research · doi:10.1021/ar200306b · Cited by 1,486
Lithium Storage in Carbon Nanostructures
Kaskhedikar, N. A., & Maier, J. (2009) · Advanced Materials · doi:10.1002/adma.200901079 · Cited by 1,161
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Self-citationCarbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
Self-citationBiomass derived carbon for energy storage devices
Wang, J., Nie, P., Ding, B., Dong, S., Hao, X., Dou, H., & Zhang, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08742f · Cited by 809
Lu, P., Sun, Y., Xiang, H., Liang, X., & Yu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702434 · Cited by 691
Saurel, D., Orayech, B., Xiao, B., Carriazo, D., Li, X., & Rojo, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703268 · Cited by 668
Huang, S., Li, Z., Wang, B., Zhang, J., Peng, Z., Qi, R., Wang, J., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706294 · Cited by 585
Lu, Y., Zhao, C., Qi, X., Qi, Y., Li, H., Huang, X., Chen, L., & Hu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800108 · Cited by 437
Self-citationHard Carbon as Sodium‐Ion Battery Anodes: Progress and Challenges
Xiao, B., Rojo, T., & Li, X. (2019) · ChemSusChem · doi:10.1002/cssc.201801879 · Cited by 432
Ghimbeu, C. M., Górka, J., Simone, V., Simonin, L., Martinet, S., & Vix‐Guterl, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.12.013 · Cited by 403
Interphases in Sodium‐Ion Batteries
Song, J., Xiao, B., Lin, Y., Xu, K., & Li, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703082 · Cited by 389
Mechanistic insights into sodium storage in hard carbon anodes using local structure probes
Stratford, J. M., Allan, P. K., Pecher, O., Chater, P. A., & Grey, C. P. (2016) · Chemical Communications · doi:10.1039/c6cc06990h · Cited by 359
Bommier, C., & Ji, X. (2018) · Small · doi:10.1002/smll.201703576 · Cited by 358
Holey 2D Nanomaterials for Electrochemical Energy Storage
Peng, L., Fang, Z., Zhu, Y., Yan, C., & Yu, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702179 · Cited by 356
Synthesis of hard carbon from argan shells for Na-ion batteries
Dahbi, M., Kiso, M., Kubota, K., Horiba, T., Chafik, T., Hida, K., Matsuyama, T., & Komaba, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01394a · Cited by 347
Facile synthesis of high performance hard carbon anode materials for sodium ion batteries
Sun, N., Liu, H., & Xu, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05118e · Cited by 345
Qi, Y., Lu, Y., Ding, F., Zhang, Q., Li, H., Huang, X., Chen, L., & Hu, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900005 · Cited by 312
Self-citationOrigin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
Sodium storage in hard carbon with curved graphene platelets as the basic structural units
Wang, K., Xu, Y., Li, Y., Dravid, V. P., Wu, J., & Huang, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11510a · Cited by 189
Self-citationGe, P., Hou, H., Cao, X., Li, S., Zhao, G., Guo, T., Wang, C., & Ji, X. (2018) · Advanced Science · doi:10.1002/advs.201800080 · Cited by 134
Bommier, C., Ji, X., & Greaney, P. A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01390 · Cited by 126
Studies on electrochemical sodium storage into hard carbons with binder-free monolithic electrodes
Hasegawa, G., Kanamori, K., Kannari, N., Ozaki, J., Nakanishi, K., & Abe, T. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.013 · Cited by 113
Bommier, C., Leonard, D. P., Jian, Z., Stickle, W. F., Greaney, P. A., & Ji, X. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600449 · Cited by 98
A Functionalized Carbon Surface for High‐Performance Sodium‐Ion Storage
Lin, Q., Jun, Z., Lv, W. Z., Ma, J., He, Y., Kang, F., & Yang, Q. (2019) · Small · doi:10.1002/smll.201902603 · Cited by 93
Aroso, I. M., Araújo, A. R., Pires, R. A., & Reis, R. L. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00751 · Cited by 83
Nanomanufacturing of graphene nanosheets through nano-hole opening and closing
Chen, Y., Wang, Y., Zhu, S., Fu, K. K., Han, X., Wang, Y., Zhao, B., Tian, L., Liu, B., Li, Y., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.09.001 · Cited by 81
Self-citationWang, E., Chen, M., Guo, X., Chou, S., Zhong, B., & Dou, S. X. (2019) · Small Methods · doi:10.1002/smtd.201900163 · Cited by 74
Activated Carbon from E-Waste Plastics as a Promising Anode for Sodium-Ion Batteries
Kumar, U., Goonetilleke, D., Gaikwad, V. V., Pramudita, J. C., Joshi, R. K., Sharma, N., & Sahajwalla, V. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00135 · Cited by 73
Chen, Y., Zhang, Z., Lai, Y., Shi, X., Li, J., Chen, X., Zhang, K., & Li, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.066 · Cited by 72
Waste Beverage Coffee-Induced Hard Carbon Granules for Sodium-Ion Batteries
Lee, M. E., Kwak, H. W., Jin, H., & Yun, Y. S. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00971 · Cited by 64
Cited by
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Self-citationTang, Z., Zhang, R., Wang, H., Zhou, S., Pan, Z., Huang, Y., Sun, D., Tang, Y., Ji, X., Amine, K., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39637-5 · Cited by 846
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective
Chu, Y., Zhang, J., Zhang, Y., Li, Q., Jia, Y., Dong, X., Xiao, J., Tao, Y., & Yang, Q. (2023) · Advanced Materials · doi:10.1002/adma.202212186 · Cited by 602
Metadata
- Authors
- Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., & Hu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-11-13
- Volume
- 9
- Issue
- 48
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2983739955
- Cited by
- 643
- References
- 35
- FWCI
- 12.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.