The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Advances in Composite Polymer Electrolytes for Lithium Batteries and Beyond
Abstract
Conventional lithium‐ion batteries have approached their capacity and energy density limits. Use of lithium metal anode can enable high‐energy batteries. However, the safety hazards and lithium dendrite formation associated with lithium metal require safe electrolytes to replace flammable liquid ones. In recent years, solid‐state electrolytes have attracted tremendous attention. Among them, composite polymer electrolytes (CPEs) with different constitutions have the unique advantages of low interfacial resistance, high ionic conductivity, and flexible characteristics. Here, the basic properties and analysis methods related to CPEs are discussed. Following that, the components added into the polymer matrix, such as organic solvents, nanostructured ceramics, and fast‐ion‐conductive inorganics are classified. CPEs used in low‐cost Na and K batteries are briefly discussed. It is hoped that the review can supply both advances and fundamentals to the researchers in this field and provide guidance for the development of CPEs for lithium battery systems, and beyond.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
Advanced energy materials for flexible batteries in energy storage: A review
Kong, L., Tang, C., Peng, H., Huang, J., & Zhang, Q. (2020) · SmartMat · doi:10.1002/smm2.1007 · Cited by 316
Metadata
- Authors
- Tang, S., Guo, W., & Fu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-05-07
- Volume
- 11
- Issue
- 2
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3023418865
- Cited by
- 335
- References
- 3
- FWCI
- 14.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
