The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Enabling 6C Fast Charging of Li‐Ion Batteries with Graphite/Hard Carbon Hybrid Anodes
Open accessAbstract
Li‐ion batteries that can simultaneously achieve high‐energy density and fast charging are essential for electric vehicles. Graphite anodes enable a high‐energy density, but suffer from an inhomogeneous reaction current and irreversible Li plating during fast charging. In contrast, hard carbon exhibits superior rate performance but lower energy density owing to its lower initial coulombic efficiency and higher average voltage. In this work, these tradeoffs are overcome by fabricating hybrid anodes with uniform mixtures of graphite and hard carbon, using industrially‐relevant multi‐layer pouch cells (>1 Ah) and electrode loadings (3 mAh cm−2). By controlling the graphite/hard carbon ratio, this study shows that battery performance can be systematically tuned to achieve both high‐energy density and efficient fast charging. Pouch cells with optimized hybrid anodes retain 87% and 82% of their initial specific energy after 500 cycles of 4C and 6C fast‐charge cycling, respectively. This is significantly higher than the 61% and 48% specific energy retention with graphite anodes under the same conditions. The enhanced performance is attributed to improved homogeneity of the reaction current throughout the hybrid anode, which is supported by continuum‐scale modeling. This process is directly compatible with existing roll‐to‐roll battery manufacturing, representing a scalable pathway to fast charging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Enabling fast charging – A battery technology gap assessment
Ahmed, S., Bloom, I., Jansen, A. N., Tanim, T., Dufek, E. J., Pesaran, A., Burnham, A., Carlson, R. B., Dias, F., Hardy, K., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.055 · Cited by 498
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Hard Carbon Anodes for Next‐Generation Li‐Ion Batteries: Review and Perspective
Xie, L., Tang, C., Bi, Z., Song, M., Fan, Y., Yan, C., Li, X., Su, F., Zhang, Q., & Chen, C. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101650 · Cited by 617
Fast Charging Anode Materials for Lithium‐Ion Batteries: Current Status and Perspectives
Li, S., Wang, K., Zhang, G., Li, S., Xu, Y., Zhang, X., Zhang, X., Zheng, S., Sun, X., & Ma, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200796 · Cited by 607
Origin of fast charging in hard carbon anodes
Li, Y., Vasileiadis, A., Zhou, Q., Lu, Y., Meng, Q., Li, Y., Ombrini, P., Zhao, J., Chen, Z., Niu, Y., et al. (2024) · Nature Energy · doi:10.1038/s41560-023-01414-5 · Cited by 490
Liu, Y., Shi, H., & Wu, Z.-S. (2023) · Energy & Environmental Science · doi:10.1039/d3ee02213g · Cited by 395
Metadata
- Authors
- Chen, K., Goel, V., Namkoong, M. J., Wied, M., Müller, S., Wood, V., Sakamoto, J., Thornton, K., & Dasgupta, N. P.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-12-28
- Volume
- 11
- Issue
- 5
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3114200504
- Cited by
- 248
- References
- 3
- FWCI
- 9.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.