The DOI matches its Crossref record; 280 of the 280 references it cites were found in a registry or an index.
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Open accessAbstract
Fast charging is considered to be a key requirement for widespread economic success of electric vehicles. Current lithium‐ion batteries (LIBs) offer high energy density enabling sufficient driving range, but take considerably longer to recharge than traditional vehicles. Multiple properties of the applied anode, cathode, and electrolyte materials influence the fast‐charging ability of a battery cell. In this review, the physicochemical basics of different material combinations are considered in detail, identifying the transport of lithium inside the electrodes as the crucial rate‐limiting steps for fast‐charging. Lithium diffusion within the active materials inherently slows down the charging process and causes high overpotentials. In addition, concentration polarization by slow lithium‐ion transport within the electrolyte phase in the porous electrodes also limits the charging rate. Both kinetic effects are responsible for lithium plating observed on graphite anodes. Conclusions drawn from potential and concentration profiles within LIB cells are complemented by extensive literature surveys on anode, cathode, and electrolyte materials—including solid‐state batteries. The advantages and disadvantages of typical LIB materials are analyzed, resulting in suggestions for optimum properties on the material and electrode level for fast‐charging applications. Finally, limitations on the cell level are discussed briefly as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–280 of 280
Kasnatscheew, J., Rodehorst, U. C., Streipert, B., Wiemers‐Meyer, S., Jakelski, R., Wagner, R., Cekić-Lasković, I., & Winter, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0461614jes · Cited by 145
Self-citationElectrochemical, Post-Mortem, and ARC Analysis of Li-Ion Cell Safety in Second-Life Applications
Waldmann, T., Quinn, J. B., Richter, K., Kasper, M., Tost, A., Klein, A., & Wohlfahrt‐Mehrens, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961713jes · Cited by 141
Self-citationRuan, H., Jiang, J., Sun, B., Su, X., He, X., & Zhao, K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113797 · Cited by 139
Homann, G., Stolz, L., Neuhaus, K., Winter, M., & Kasnatscheew, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006289 · Cited by 137
Self-citationThe influence of void space on ion transport in a composite cathode for all-solid-state batteries
Hlushkou, D., Reising, A. E., Kaiser, N., Spannenberger, S., Schlabach, S., Kato, Y., Roling, B., & Tallarek, U. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.041 · Cited by 136
Effect of thermal contact resistances on fast charging of large format lithium ion batteries
Ye, Y., Saw, L. H., Shi, Y., Somasundaram, K., & Tay, A. A. O. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.134 · Cited by 135
Thermodynamically consistent modeling of elementary electrochemistry in lithium-ion batteries
Colclasure, A. M., & Kee, R. J. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.08.018 · Cited by 131
Kasnatscheew, J., Evertz, M., Streipert, B., Wagner, R., Nowak, S., Cekić-Lasković, I., & Winter, M. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11746 · Cited by 131
Self-citationSurface Layer Formation on Thin-Film LiMn[sub 2]O[sub 4] Electrodes at Elevated Temperatures
Matsuo, Y., Kostecki, R. M., & McLARNON, F. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1373658 · Cited by 130
Qi, X., Blizanac, B. B., Pasquier, A. D., Oljaca, M., Li, J., & Winter, M. (2013) · Carbon · doi:10.1016/j.carbon.2013.07.083 · Cited by 128
Self-citationJow, T. R., Marx, M. B., & Allen, J. L. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.079205jes · Cited by 126
Fracture Analysis of the Cathode in Li-Ion Batteries: A Simulation Study
Zhu, M., Park, J. H., & Sastry, A. M. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.045204jes · Cited by 126
On the Theoretical Capacity/Energy of Lithium Batteries and Their Counterparts
Eftekhari, A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04330 · Cited by 126
A Study on the Effect of Porosity and Particles Size Distribution on Li-Ion Battery Performance
Taleghani, S. T., Marcos, B., Zaghib, K., et al. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0211711jes · Cited by 121
Tokranov, A., Kumar, R., Li, C., Minne, S. C., Xiao, X., & Sheldon, B. W. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502302 · Cited by 120
An electrochemical impedance spectroscopic study of the transport properties of LiNi0.75Co0.25O2
Croce, F. (1999) · Electrochemistry Communications · doi:10.1016/s1388-2481(99)00123-x · Cited by 118
Nakamura, T., Amezawa, K., Kulisch, J., Zeier, W. G., & Janek, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03053 · Cited by 118
Self-citationKaiser, N., Spannenberger, S., Schmitt, M., Cronau, M., Kato, Y., & Roling, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.095 · Cited by 116
Kim, J., Nithya Jeghan, S. M., & Lee, G. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110325 · Cited by 112
Shim, J., & Striebel, K. A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00235-0 · Cited by 112
Kinetics of Lithium-Ion Transfer at the Interface between Li0.35La0.55TiO3 and Binary Electrolytes
Yamada, Y., Sagane, F., Iriyama, Y., Abe, T., & Ogumi, Z. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9043539 · Cited by 112
Francisco, B. E., Stoldt, C. R., & M’Peko, J.-C. (2014) · Chemistry of Materials · doi:10.1021/cm5013872 · Cited by 111
Kasnatscheew, J., Evertz, M., Schmuch, R., Streipert, B., Wagner, R., Cekić-Lasković, I., & Winter, M. (2017) · Energy Technology · doi:10.1002/ente.201700068 · Cited by 109
Self-citationKlein, S., Bärmann, P., Fromm, O., Borzutzki, K., Reiter, J., Fan, Q., Winter, M., Placke, T., & Kasnatscheew, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11775g · Cited by 109
Self-citationBirkenmaier, C., Bitzer, B., Harzheim, M., Hintennach, A., & Schleid, T. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0451514jes · Cited by 108
Li, G., Liu, Z., Wang, D., Wang, D., He, X., Liu, S., Gao, Y., Alzahrani, A. S., Kim, S. H., Chen, L., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900704 · Cited by 108
Interfacial Effects in Lithium and Sodium Batteries
Usiskin, R. E., & Maier, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001455 · Cited by 107
Röder, F., Sonntag, S., Schröder, D., & Krewer, U. (2016) · Energy Technology · doi:10.1002/ente.201600232 · Cited by 103
Rate effect on lithium-ion graphite electrode performance
Tran, T. D., Feikert, J. H., Pekala, R. W., & Kinoshita, K. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00243741 · Cited by 102
On the Nature and Behavior of Li Atoms in Si: A First Principles Study
Kim, H., Kweon, K. E., Chou, C.-Y., Ekerdt, J. G., & Hwang, G. S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp104289x · Cited by 101
Insertion of Lithium Ions into Carbon Nanotubes: An ab Initio Study
Kar, T., Pattanayak, J., & Scheiner, S. (2001) · The Journal of Physical Chemistry A · doi:10.1021/jp011698l · Cited by 99
Malyi, O. I., Tan, T. L., & Manzhos, S. (2013) · Applied Physics Express · doi:10.7567/apex.6.027301 · Cited by 97
Xu, X., Luo, Y., Mai, L., Zhao, Y., An, Q., Xu, L., Hu, F., Zhang, L., & Zhang, Q. (2012) · NPG Asia Materials · doi:10.1038/am.2012.36 · Cited by 95
The Impact of Pulse Charging Parameters on the Life Cycle of Lithium-Ion Polymer Batteries
Amanor-Boadu, J. M., Guiseppi‐Elie, A., & Sánchez‐Sinencio, E. (2018) · Energies · doi:10.3390/en11082162 · Cited by 95
Advanced cathode materials for high-power applications
Amine, K., Liu, J., Belharouak, I., Kang, S.-H., Bloom, I., Vissers, D. R., & Henriksen, G. L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.227 · Cited by 94
Advanced in situ characterization methods applied to carbonaceous materials
Novák, P., Goers, D., Hardwick, L. J., Holzapfel, M., Scheifele, W., Ufheil, J., & Würsig, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.129 · Cited by 93
A Fast Rechargeable Lithium-Ion Battery at Subfreezing Temperatures
Wang, C., Xu, T., Ge, S., Zhang, G., Yang, X., & Ji, Y. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0681609jes · Cited by 92
Rodrigues, M., Kalaga, K., Trask, S., Dees, D., Shkrob, I., & Abraham, D. (2019) · Journal of the Electrochemical Society · doi:10.1149/2.0401906jes · Cited by 91
Adam, A., Wandt, J., Knobbe, E., Bauer, G., & Kwade, A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abb564 · Cited by 89
Kasnatscheew, J., Streipert, B., Röser, S., Wagner, R., Laskovic, I., & Winter, M. (2017) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c7cp03072j · Cited by 88
Self-citationDesign and Demonstration of Three-Electrode Pouch Cells for Lithium-Ion Batteries
An, S. J., Li, J., Daniel, C., Kalnaus, S., & Wood, D. L. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0031709jes · Cited by 88
Ghanbari, N., Waldmann, T., Kasper, M., Axmann, P., & Wohlfahrt‐Mehrens, M. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b07117 · Cited by 87
Self-citationEffects of Electrolyte Additives and Solvents on Unwanted Lithium Plating in Lithium-Ion Cells
Liu, Q.-Q., Petibon, R., Du, C.-Y., & Dahn, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1081706jes · Cited by 87
Homann, G., Stolz, L., Winter, M., & Kasnatscheew, J. (2020) · iScience · doi:10.1016/j.isci.2020.101225 · Cited by 87
Self-citationDetermination of Tortuosity Using Impedance Spectra Analysis of Symmetric Cell
Malifarge, S., Delobel, B., & Delacourt, C. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0331711jes · Cited by 80
Kraft, L., Habedank, J. B., Frank, A., Rheinfeld, A., & Jossen, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0062001jes · Cited by 80
High Rate, Long Lifespan LiV3O8 Nanorods as a Cathode Material for Lithium‐Ion Batteries
Chen, Z., Xu, F. J., Cao, S., Li, Z., Yang, H., Ai, X., & Cao, Y. (2017) · Small · doi:10.1002/smll.201603148 · Cited by 78
Levi, M. D., Markevich, E., & Aurbach, D. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0441902 · Cited by 77
Self-citationKasnatscheew, J., Evertz, M., Streipert, B., Wagner, R., Nowak, S., Cekić-Lasković, I., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.092 · Cited by 76
Self-citationRichter, K., Waldmann, T., Paul, N., Jobst, N. M., Scurtu, R., Hofmann, M., Gilles, R., & Wohlfahrt‐Mehrens, M. (2019) · ChemSusChem · doi:10.1002/cssc.201903139 · Cited by 76
Self-citationFluoroethylene Carbonate as an Additive for γ-Butyrolactone Based Electrolytes
Kasnatscheew, J., Schmitz, R. W., Wagner, R., Winter, M., & Schmitz, R. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.009309jes · Cited by 74
Self-citationZheng, Y., Shi, Y., & Huang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.090 · Cited by 74
Preparation and 7Li-NMR study of chemically delithiated Li1−xCoO2 (0<x<0.5)
Imanishi, N. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(98)00441-x · Cited by 72
Gao, P. D., Yang, G., Liu, H., Wang, L., & Zhou, H. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2011.11.020 · Cited by 70
Interfacial Reactions of Lithium-ion Batteries
Ogumi, Z. (2010) · Electrochemistry · doi:10.5796/electrochemistry.78.319 · Cited by 70
Park, Y., Shin, S. H., Hwang, H., Lee, S. M., Kim, S. P., Choi, H. C., & Jung, Y. M. (2014) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2014.01.041 · Cited by 66
High-rate performance of ferroelectric BaTiO3-coated LiCoO2 for Li-ion batteries
Teranishi, T., Yoshikawa, Y., Sakuma, R., Hashimoto, H., Hayashi, H., Kishimoto, A., & Fujii, T. (2014) · Applied Physics Letters · doi:10.1063/1.4898006 · Cited by 65
Yasuhara, S., Yasui, S., Teranishi, T., Chajima, K., Yoshikawa, Y., Majima, Y., Taniyama, T., & Itoh, M. (2019) · Nano Letters · doi:10.1021/acs.nanolett.8b04690 · Cited by 63
Detection of Li Deposition by Glow Discharge Optical Emission Spectroscopy in Post-Mortem Analysis
Ghanbari, N., Waldmann, T., Kasper, M., Axmann, P., & Wohlfahrt‐Mehrens, M. (2015) · ECS Electrochemistry Letters · doi:10.1149/2.0041509eel · Cited by 62
Self-citationYanase, S., & Oi, T. (2002) · Journal of Nuclear Science and Technology · doi:10.1080/18811248.2002.9715294 · Cited by 62
Homann, G., Meister, P., Stolz, L., Brinkmann, J., Kulisch, J., Adermann, T., Winter, M., & Kasnatscheew, J. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00041 · Cited by 61
Self-citationFalco, M., Ferrari, S., Appetecchi, G. B., & Gerbaldi, C. (2019) · Molecular Systems Design & Engineering · doi:10.1039/c9me00050j · Cited by 57
The preparation of porous graphite and its application in lithium ion batteries as anode material
Deng, T., & Zhou, X. (2016) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-016-3260-1 · Cited by 49
The five modes of heat generation in a Li-ion cell under discharge
Srinivasan, R., Baisden, A. C., Carkhuff, B. G., & Butler, M. H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.062 · Cited by 48
Röser, S., Lerchen, A., Ibing, L., Cao, X., Kasnatscheew, J., Glorius, F., Winter, M., & Wagner, R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01977 · Cited by 48
Self-citationChen, C., & Mukherjee, P. P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05758a · Cited by 47
Effect of particle morphology on lithium intercalation rates in natural graphite
Zaghib, K., Song, X., Guerfi, A., Kostecki, R. M., & Kinoshita, K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00801-2 · Cited by 42
Transfer mechanism in solid-electrolyte layers on lithium: influence of temperature and polarization
Churikov, A. V. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00439-x · Cited by 42
Stress-limited fast charging methods with time-varying current in lithium-ion batteries
Lü, B., Zhao, Y., Song, Y., & Zhang, J. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.09.009 · Cited by 42
Organic salts as super-high rate capability materials for lithium-ion batteries
Zhang, Y., Sun, Y., Du, S., Gao, H., & Zhang, S. (2012) · Applied Physics Letters · doi:10.1063/1.3689764 · Cited by 38
González, E. Q., Carstensen, J., & Föll, H. (2013) · Energies · doi:10.3390/en6105145 · Cited by 37
Mechanistic Analysis of Microstructural Attributes to Lithium Plating in Fast Charging
Kabra, V., Parmananda, M., Fear, C., Usseglio‐Viretta, F. L. E., Colclasure, A. M., Smith, K. A., & Mukherjee, P. P. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15144 · Cited by 36
Janßen, P., Kasnatscheew, J., Streipert, B., Wendt, C., Murmann, P., Ponomarenko, M. V., Stubbmann‐Kazakova, O., Röschenthaler, G., Winter, M., & Cekić-Lasković, I. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1221814jes · Cited by 35
Self-citationHogg, B.-I., Waldmann, T., & Wohlfahrt‐Mehrens, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8976 · Cited by 31
Self-citationLiquid Nonaqueous Electrolytes
Gores, H. J., Barthel, J., Zugmann, S., Moosbauer, D., Amereller, M., Hartl, R., & Maurer, A. B. (2011) · Wiley eBooks · doi:10.1002/9783527637188.ch17 · Cited by 30
A mixture of LiNi1/3Co1/3Mn1/3O2 and LiCoO2 as positive active material of LIB for power application
Liu, X., Zhu, G., Yang, K., & Wang, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.184 · Cited by 30
Jones, J., Smart, M. C., Krause, F. C., Ratnakumar, B. V., & Brandon, E. J. (2017) · ECS Transactions · doi:10.1149/07521.0001ecst · Cited by 28
Klein, S., Borzutzki, K., Schneider, P., Fromm, O., Reiter, J., Fan, Q., Placke, T., Winter, M., & Kasnatscheew, J. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c01952 · Cited by 27
Self-citationUltrafast charge transfer at the electrode−electrolyte interface via an artificial dielectric layer
Teranishi, T., Kozai, K., Yasuhara, S., Yasui, S., Ishida, N., Ishida, K., Nakayama, M., & Kishimoto, A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229710 · Cited by 27
Park, Y., Shin, S. H., Lee, S. M., Kim, S. P., Choi, H. C., & Jung, Y. M. (2014) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2014.01.083 · Cited by 25
Cited by
Fast Charging Anode Materials for Lithium‐Ion Batteries: Current Status and Perspectives
Li, S., Wang, K., Zhang, G., Li, S., Xu, Y., Zhang, X., Zhang, X., Zheng, S., Sun, X., & Ma, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200796 · Cited by 607
Liu, Y., Shi, H., & Wu, Z.-S. (2023) · Energy & Environmental Science · doi:10.1039/d3ee02213g · Cited by 395
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M., Edström, K., Ayerbe, E., Berecibar, M., Bhowmik, A., Castelli, I. E., Clark, S., Dominko, R., Erakca, M., Franco, A. A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102904 · Cited by 376
Wang, R., Wang, L., Liu, R., Li, X., Wu, Y., & Ran, F. (2024) · ACS Nano · doi:10.1021/acsnano.3c08712 · Cited by 336
A Review on the Recent Advances in Battery Development and Energy Storage Technologies
Njema, G. G., Ouma, R. B. O., & Kibet, J. K. (2024) · Journal of Renewable Energy · doi:10.1155/2024/2329261 · Cited by 329
Metadata
- Authors
- Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., Winter, M., Ein‐Eli, Y., & Janek, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2021-07-19
- Volume
- 11
- Issue
- 33
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3183176844
- Cited by
- 1,055
- References
- 280
- FWCI
- 46.45
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.