The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Promises and Challenges of the Practical Implementation of Prelithiation in Lithium‐Ion Batteries
Abstract
Lithium‐ion batteries (LIBs) have changed lives since their invention in the early 1990s. Further improvement of their energy density is highly desirable to meet the increasing demands of energy storage applications. Active lithium loss in the initial charge process appreciably reduces the capacity and energy density of LIBs due to the formation of a solid electrolyte interface (SEI) on the anode surface, especially for Si based anodes in high‐energy‐density batteries. To solve this issue, prelithiation to provide additional active lithium into the battery has been widely accepted as one of the most promising strategies. Here, key parameters/issues for the practical implementation of prelithiation approaches in LIBs are discussed, including donable lithium‐ion capacity/prelithiation efficiency, chemical and ambient stability of the prelithiation materials/reagents, safety hazards of prelithiation, residues and side reactions during prelithiation, potential effect on electrochemical performance, industrial compatibility, and scalability of the prelithiation, many of which are often overlooked in academic literature. Moreover, insights are offered regarding the potential future directions in the development of this burgeoning field. Continuous progress in prelithiation is essential and urgent to enable next‐generation high‐energy‐density LIBs in the near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
The path towards sustainable energy
Chu, S., Cui, Y., & Liu, N. (2017) · Nature Materials · doi:10.1038/nmat4834 · Cited by 4,791
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Designing nanostructured Si anodes for high energy lithium ion batteries
Wu, H., & Cui, Y. (2012) · Nano Today · doi:10.1016/j.nantod.2012.08.004 · Cited by 2,350
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Derrien, G., Hassoun, J., Panero, S., & Scrosati, B. (2007) · Advanced Materials · doi:10.1002/adma.200700748 · Cited by 868
Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries
Liu, N., Hu, L., McDowell, M. T., Jackson, A., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn2017167 · Cited by 578
Kim, H. J., Choi, S., Lee, S. J., Seo, M. W., Lee, J. G., Deniz, E., Lee, Y. J., Kim, E. K., & Choi, J. W. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03776 · Cited by 549
Confronting Issues of the Practical Implementation of Si Anode in High-Energy Lithium-Ion Batteries
Chae, S., Ko, M., Kim, K., Ahn, K., & Cho, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.006 · Cited by 542
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Chen, H., Yang, Y., Boyle, D. T., Jeong, Y. K., Xu, R., de Vasconcelos, L. S., Huang, Z., Wang, H., Wang, H., Huang, W., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00833-6 · Cited by 409
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
Self-citationHigh-capacity battery cathode prelithiation to offset initial lithium loss
Sun, Y., Lee, H.-W., Seh, Z. W., Liu, N., Sun, J., Li, Y., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2015.8 · Cited by 396
Self-citationZhao, J., Lu, Z., Liu, N., Lee, H.-W., McDowell, M. T., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6088 · Cited by 384
Forney, M. W., Ganter, M. J., Staub, J. W., Ridgley, R. D., & Landi, B. J. (2013) · Nano Letters · doi:10.1021/nl401776d · Cited by 381
Zhao, J., Lu, Z., Wang, H., Liu, W., Lee, H.-W., Yan, K., Zhuo, D., Lin, D., Liu, N., & Cui, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04526 · Cited by 369
Holtstiege, F., Bärmann, P., Nölle, R., Winter, M., & Placke, T. (2018) · Batteries · doi:10.3390/batteries4010004 · Cited by 357
Wang, F., Wang, B., Li, J., Wang, B., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2021) · ACS Nano · doi:10.1021/acsnano.0c10664 · Cited by 357
Tu, S., Chen, X., Zhao, X., Cheng, M., Xiong, P., He, Y., Zhang, Q., & Xu, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804581 · Cited by 319
Liu, Y., Tai, Z., Zhou, T., Sencadas, V., Zhang, J., Zhang, L., Konstantinov, K., Guo, Z., & Liu, H. K. (2017) · Advanced Materials · doi:10.1002/adma.201703028 · Cited by 315
Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes
Wang, S.-H., Yue, J., Dong, W., Zuo, T.-T., Li, J.-Y., Liu, X., Zhang, X.-D., Liu, L., Shi, J.-L., Yin, Y.-X., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12938-4 · Cited by 279
Zou, K., Deng, W., Cai, P., Deng, X., Wang, B., Liu, C., Li, J., Hou, H., Zou, G., & Ji, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005581 · Cited by 275
Progress and perspectives on pre-lithiation technologies for lithium ion capacitors
Jin, L., Shen, C., Shellikeri, A., Wu, Q., Zheng, J., Andrei, P., Zhang, J.-G., & Zheng, J. P. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00807a · Cited by 238
A New, Safe, High‐Rate and High‐Energy Polymer Lithium‐Ion Battery
Hassoun, J., Panero, S., Reale, P., & Scrosati, B. (2009) · Advanced Materials · doi:10.1002/adma.200900470 · Cited by 234
Meng, Q., Li, G., Yue, J., Xu, Q., Yin, Y.-X., & Guo, Y.-G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12086 · Cited by 196
Metallurgically lithiated SiO x anode with high capacity and ambient air compatibility
Zhao, J., Lee, H.-W., Sun, J., Yan, K., Liu, Y., Liu, W., Lu, Z., Lin, D., Zhou, G., & Cui, Y. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1603810113 · Cited by 182
A prelithiated carbon anode for lithium-ion battery applications
Jarvis, C. R., Lain, M. J., Yakovleva, M. V., & Gao, Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.051 · Cited by 175
Chemical Prelithiation of Negative Electrodes in Ambient Air for Advanced Lithium-Ion Batteries
Wang, G., Li, F., Liŭ, D., Zheng, D., Luo, Y., Qu, D., Ding, T., & Qu, D. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19416 · Cited by 159
Best Practices for Mitigating Irreversible Capacity Loss of Negative Electrodes in Li‐Ion Batteries
Aravindan, V., Lee, Y., & Srinivasan, M. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602607 · Cited by 148
Effect of Graphite Particle Size on Irreversible Capacity Loss
Zaghib, K., Nadeau, G., & Kinoshita, K. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393493 · Cited by 145
A Novel Lithium‐Doping Approach for an Advanced Lithium Ion Capacitor
Park, M., Lim, Y., Kim, J., Kim, Y., Cho, J., & Kim, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100270 · Cited by 143
A general prelithiation approach for group IV elements and corresponding oxides
Zhao, J., Sun, J., Pei, A., Zhou, G., Yan, K., Liu, Y., Lin, D., & Cui, Y. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.06.013 · Cited by 138
A new strategy to mitigate the initial capacity loss of lithium ion batteries
Su, X., Lin, C., Wang, X. P., Maroni, V. A., Ren, Y., Johnson, C. S., & Lu, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.063 · Cited by 130
Self-citationLithium Sulfide/Metal Nanocomposite as a High‐Capacity Cathode Prelithiation Material
Sun, Y., Lee, H., Seh, Z. W., Zheng, G. W., Sun, J., Li, Y., & Cui, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600154 · Cited by 126
Self-citationRole of Li6CoO4Cathode Additive in Li-Ion Cells Containing Low Coulombic Efficiency Anode Material
Noh, M., & Cho, J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.085208jes · Cited by 111
Li2O Removal from Li5FeO4: A Cathode Precursor for Lithium-Ion Batteries
Johnson, C. S., Kang, S.-H., Vaughey, J. T., Pol, S. V., Balasubramanian, M., & Thackeray, M. M. (2010) · Chemistry of Materials · doi:10.1021/cm902713m · Cited by 109
Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage
Zhu, Y., Hu, W., Zhou, J., Cai, W., Lu, Y., Liang, J., Li, X., Zhu, S., Fu, Q., & Qian, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22507 · Cited by 107
LiFeO2-Incorporated Li2MoO3 as a Cathode Additive for Lithium-Ion Battery Safety
Park, K., Im, D., Benayad, A., Dylla, A. G., Stevenson, K. J., & Goodenough, J. B. (2012) · Chemistry of Materials · doi:10.1021/cm300505y · Cited by 101
Chemical Formation of a Solid Electrolyte Interface on the Carbon Electrode of a Li‐Ion Cell
Scott, M. G., Whitehead, A., & Owen, J. R. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838511 · Cited by 100
Li2NiO2 as a Novel Cathode Additive for Overdischarge Protection of Li-Ion Batteries
Lee, H., Chang, S.-K., Goh, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm702290p · Cited by 95
Wang, G., Li, F., Liŭ, D., Zheng, D., Abeggien, C. J., Luo, Y., Yang, X., Ding, T., & Qu, D. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.08.025 · Cited by 92
Synthesis, Electrochemical Properties, and Phase Stability of Li2NiO2 with the Immm Structure
Kang, K., Chen, C., Hwang, B., & Ceder, G. (2004) · Chemistry of Materials · doi:10.1021/cm049922h · Cited by 89
Li‐Metal‐Free Prelithiation of Si‐Based Negative Electrodes for Full Li‐Ion Batteries
Zhou, H., Wang, X., & Chen, D. (2015) · ChemSusChem · doi:10.1002/cssc.201500287 · Cited by 83
Self-citationFridman, K., Sharabi, R., Elazari, R., Gershinsky, G., Markevich, E., Salitra, G., Aurbach, D., Garsuch, A., & Lampert, J. K. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.04.010 · Cited by 81
Cao, W., Luo, J. F., Yan, J., Chen, X. J., Brandt, W., Warfield, M., Lewis, D., Yturriaga, S., Moye, D. G., & Zheng, J. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0351702jes · Cited by 68
Cheah, Y. L., Aravindan, V., & Srinivasan, M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.015308jes · Cited by 60
Fan, H., Chen, B., Li, S., Yu, Y., Xu, H., Jiang, M., Huang, Y., & Li, J. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03626 · Cited by 53
Tu, S., Ai, X. P., Wang, X., Gui, S., Cai, Z., Zhan, R., Tan, Y., Liu, W., Yang, H. M., Li, C., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.03.053 · Cited by 41
Self-citationConstructing High Energy and Power Densities Li-Ion Capacitors Using Li Thin Film for Pre-Lithiation
Yan, J., Cao, W., & Zheng, J. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1701709jes · Cited by 39
Dose, W. M., Blauwkamp, J., Piernas-Muñoz, M. J., Bloom, I., Xue, R., Klie, R. F., Senguttuvan, P., & Johnson, C. S. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00695 · Cited by 39
Ryu, J., Kang, J., Kim, H., Lee, J. H., Lee, H., & Park, S. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.08.012 · Cited by 39
Graphene boosted Cu 2 GeS 3 for advanced lithium-ion batteries
Fu, L., Zhang, C., Chen, B., Zhang, Z., Wang, X., Zhao, J., He, J., Du, H., & Cui, G. (2016) · Inorganic Chemistry Frontiers · doi:10.1039/c6qi00521g · Cited by 26
Self-citationCoordinated management and control of autonomous traffic systems
Liu, X., Lu, G., Zheng, F., Li, R., Cao, P., Kong, Y., & Nie, Y. M. (2019) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2019-0526 · Cited by 5
Cited by
Fan, M., Meng, Q., Chang, X., Gu, C., Meng, X., Yin, Y., Li, H., Wan, L., & Guo, Y. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103630 · Cited by 313
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Metadata
- Authors
- Zhan, R., Wang, X., Chen, Z., Seh, Z. W., Wang, L., & Sun, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2021-07-16
- Volume
- 11
- Issue
- 35
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3184182318
- Cited by
- 282
- References
- 56
- FWCI
- 13.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.