The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
High‐Capacity and Kinetically Accelerated Lithium Storage in MoO3 Enabled by Oxygen Vacancies and Heterostructure
Abstract
Molybdenum trioxide (MoO 3) has recently aroused intensive interest as a renowned conversion‐type anode of Li‐ion batteries (LIBs). Nevertheless, the inferior rate capability, sluggish reaction kinetics, and fast capacity decay during a long‐term charge/discharge process seriously inhibits large‐scale commercial application. Herein, abundant oxygen vacancies and MXene nanosheets are elaborately introduced into MoO 3 nanobelts through hydrazine reduction and electrostatic assembly to accelerate the ionic and electronic diffusion/transport kinetics for LIBs. Benefitting from the accelerated ion diffusion kinetics, enhanced electrical conductivity, and additional active sites induced by oxygen vacancies as well as the robust interfacial contact, the prepared MoO 3−x/MXene heterostructure exhibits excellent lithium‐ion storage performances. First‐principles calculations indicate that the adsorption of Li+ ion and the electrical conductivity are significantly enhanced for the MoO 3−x/MXene heterostructure. Thus, the composite exhibits high reversible capacity of 1258 mAh g−1 at 0.1 A g−1 for Li‐ion storage and retains 474 mAh g−1 at 10 A g−1, remarkably higher than those of the previously reported MoO 3‐based anode materials. More importantly, the composite is fabricated with commercial LiFePO 4 into a full LIB, which displays an unparalleled energy density of 330 Wh kg−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3−x
Kim, H.-S., Cook, J. B., Lin, H., Ko, J. S., Tolbert, S. H., Ozolins, V., & Dunn, B. (2017) · Nature Materials · doi:10.1038/nmat4810 · Cited by 2,166
Energy storage: The future enabled by nanomaterials
Pomerantseva, E., Bonaccorso, F., Feng, X., Cui, Y., & Gogotsi, Y. (2019) · Science · doi:10.1126/science.aan8285 · Cited by 1,927
Flexible MXene/Graphene Films for Ultrafast Supercapacitors with Outstanding Volumetric Capacitance
Yan, J., Ren, C. E., Maleski, K., Hatter, C. B., Anasori, B., Urbankowski, P., Sarycheva, A., & Gogotsi, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701264 · Cited by 1,883
Self-citationAdvanced Technology Paths to Global Climate Stability: Energy for a Greenhouse Planet
Hoffert, M. I., Caldeira, K., Benford, G., Criswell, D. R., Green, C., Herzog, H., Jain, A. K., Kheshgi, H. S., Lackner, K. S., Lewis, J. S., et al. (2002) · Science · doi:10.1126/science.1072357 · Cited by 1,549
Zhuang, L., Ge, L., Yang, Y., Li, M., Jia, Y., Yao, X., & Zhu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606793 · Cited by 1,456
Wang, Z., Luan, D., Madhavi, S., Hu, Y., & Lou, X. W. (. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02831f · Cited by 780
Liu, Y., Zhang, P., Sun, N., Anasori, B., Zhu, Q., Liu, H., Gogotsi, Y., & Xu, B. (2018) · Advanced Materials · doi:10.1002/adma.201707334 · Cited by 759
3D Graphene Foams Cross‐linked with Pre‐encapsulated Fe3O4 Nanospheres for Enhanced Lithium Storage
Wei, W., Yang, S., Zhou, H., Lieberwirth, I., Feng, X., & Müllen, K. (2013) · Advanced Materials · doi:10.1002/adma.201300445 · Cited by 754
Molybdenum Oxides – From Fundamentals to Functionality
de Castro, I. A., Datta, R. S., Ou, J. Z., Castellanos‐Gomez, A., Sriram, S., Daeneke, T., & Kalantar‐zadeh, K. (2017) · Advanced Materials · doi:10.1002/adma.201701619 · Cited by 741
Sun, H., Xin, G., Hu, T., Yu, M., Shao, D., Sun, X., & Lian, J. (2014) · Nature Communications · doi:10.1038/ncomms5526 · Cited by 683
Scalable salt-templated synthesis of two-dimensional transition metal oxides
Xiao, X., Song, H., Lin, S., Zhou, Y., Zhan, X., Hu, Z., Zhang, Q., Sun, J., Yang, B., Li, T., et al. (2016) · Nature Communications · doi:10.1038/ncomms11296 · Cited by 458
Self-citationMesoporous MoO3–x Material as an Efficient Electrocatalyst for Hydrogen Evolution Reactions
Luo, Z., Miao, R., Huan, T. D., Mosa, I. M., Poyraz, A. S., Zhong, W., Cloud, J. E., Kriz, D. A., Thanneeru, S., He, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600528 · Cited by 457
Self-citationZhao, D., Zhao, R., Dong, S., Miao, X., Zhang, Z., Wang, C., & Yin, L. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00308h · Cited by 418
Tunable Plasmon Resonances in Two‐Dimensional Molybdenum Oxide Nanoflakes
Alsaif, M. M. Y. A., Latham, K., Field, M. R., Yao, D. D., Medehkar, N. V., Beane, G. A., Kaner, R. B., Russo, S. P., Ou, J. Z., & Kalantar‐zadeh, K. (2014) · Advanced Materials · doi:10.1002/adma.201306097 · Cited by 365
Hui, X., Zhao, R., Zhang, P., Li, C., Wang, C., & Yin, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901065 · Cited by 365
Yang, J., Xiao, X., Chen, P., Zhu, K., Cheng, K., Ye, K., Wang, G., Cao, D., & Yan, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.071 · Cited by 363
Self-citationMeng, R., Huang, J., Feng, Y., Zu, L., Peng, C., Zheng, L., Zheng, L., Chen, Z., Liu, G., Chen, B., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801514 · Cited by 358
All-region-applicable, continuous power supply of graphene oxide composite
Huang, Y., Cheng, H., Yang, C., Yao, H., Li, C., & Qu, L. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00838a · Cited by 318
Yang, X., Wang, Q., Zhu, K., Ye, K., Wang, G., Cao, D., & Yan, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101087 · Cited by 308
Self-citationFang, Y., Lv, Y., Gong, F., Elzatahry, A. A., Zheng, G., & Zhao, D. (2016) · Advanced Materials · doi:10.1002/adma.201602210 · Cited by 286
Wang, C., Wu, L., Wang, H., Zuo, W., Li, Y., & Liu, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500634 · Cited by 279
Wang, Z., Madhavi, S., & Lou, X. W. (. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp304216z · Cited by 260
Macroscopic heat release in a molecular solar thermal energy storage system
Wang, Z., Roffey, A., Losantos, R., Lennartson, A., Jevric, M., Petersen, A. U., Quant, M., Dreos, A., Wen, X., Sampedro, D., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee01011k · Cited by 213
Highly Efficient Sodium Storage in Iron Oxide Nanotube Arrays Enabled by Built‐In Electric Field
Ni, J., Sun, M., & Li, L. (2019) · Advanced Materials · doi:10.1002/adma.201902603 · Cited by 173
Superior performance asymmetric supercapacitors based on ZnCo2O4@MnO2core–shell electrode
Ma, W., Nan, H., Gu, Z., Geng, B., & Zhang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00012b · Cited by 171
Tin Intercalated Ultrathin MoO3 Nanoribbons for Advanced Lithium–Sulfur Batteries
Yang, W., Xiao, J., Ma, Y., Cui, S., Zhang, P., Zhai, P., Meng, L., Wang, X., Wei, Y., Du, Z., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803137 · Cited by 164
Self-citationFreestanding MoO3− nanobelt/carbon nanotube films for Li-ion intercalation pseudocapacitors
Xiao, X., Peng, Z., Chen, C., Zhang, C., Beidaghi, M., Yang, Z., Wu, N., Huang, Y., Miao, L., Gogotsi, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.001 · Cited by 160
Wang, W. A., Qin, J., Yin, Z., & Cao, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b05150 · Cited by 145
Vanadium Doping Enhanced Electrochemical Performance of Molybdenum Oxide in Lithium‐Ion Batteries
Qu, G., Wang, J., Liu, G., Tian, B., Su, C., Chen, Z., Rueff, J., & Wang, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805227 · Cited by 119
Ultrafine MoO3 anchored in coal-based carbon nanofibers as anode for advanced lithium-ion batteries
Zhao, X., Jia, W., Wu, X., Lv, Y., Qiu, J., Guo, J., Wang, X., Jia, D., Yan, J., & Wu, D. (2019) · Carbon · doi:10.1016/j.carbon.2019.09.065 · Cited by 118
Self-citationWu, Q., Zhao, S., Yu, L., Zheng, X., Wang, Y., Yu, L., Nan, C., & Cao, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03471d · Cited by 117
Jiang, B., Ban, X., Wang, Q., Cheng, K., Zhu, K., Ye, K., Wang, G., Cao, D., & Yan, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta09902f · Cited by 101
Self-citationZhang, Q., Man, P., He, B., Li, C., Li, Q., Pan, Z., Wang, Z., Yang, J., Wang, Z., Zhou, Z., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104212 · Cited by 93
Self-citationZhang, G., Shi, Y., Wang, H., Jiang, L., Yu, X., Jing, S., Xing, S., & Tsiakaras, P. E. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.091 · Cited by 79
Li, W., Li, X., Liao, J., Zhao, B., Zhang, L., Huang, L., Liu, G., Guo, Z., & Liu, M. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00953a · Cited by 78
Heterostructured MXene and g-C3N4 for high-rate lithium intercalation
Zhu, Y., Lei, Y., Ming, F., Abou‐Hamad, E., Emwas, A.-H. M., Hedhili, M. N., & Alshareef, H. N. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104030 · Cited by 77
Niu, H., Qing-hua, Y., Wang, Q., Jing, X., Zhu, K., Ye, K., Wang, G., Cao, D., & Yan, J. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105360 · Cited by 42
Self-citation
Cited by
Fast Charging Anode Materials for Lithium‐Ion Batteries: Current Status and Perspectives
Li, S., Wang, K., Zhang, G., Li, S., Xu, Y., Zhang, X., Zhang, X., Zheng, S., Sun, X., & Ma, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200796 · Cited by 607
Zhao, W., Zhao, C., Wu, H., Li, L., & Zhang, C. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110409 · Cited by 265
Metadata
- Authors
- Zhang, Y., Chen, P., Wang, Q., Wang, Q., Zhu, K., Ye, K., Wang, G., Cao, D., Yan, J., & Zhang, Q.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2021-07-03
- Volume
- 11
- Issue
- 31
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3182655736
- Cited by
- 315
- References
- 39
- FWCI
- 16.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.