The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A superstructure‐based optimal synthesis of PSA cycles for post‐combustion CO2 capture
Open accessAbstract
Recent developments have shown pressure/vacuum swing adsorption (PSA/VSA) to be a promising option to effectively capture CO 2 from flue gas streams. In most commercial PSA cycles, the weakly adsorbed component in the mixture is the desired product, and enriching the strongly adsorbed CO 2 is not a concern. On the other hand, it is necessary to concentrate CO 2 to high purity to reduce CO 2 sequestration costs and minimize safety and environmental risks. Thus, it is necessary to develop PSA processes specifically targeted to obtain pure strongly adsorbed component. A multitude of PSA/VSA cycles have been developed in the literature for CO 2 capture from feedstocks low in CO 2 concentration. However, no systematic methodology has been suggested to develop, evaluate, and optimize PSA cycles for high purity CO 2 capture. This study presents a systematic optimization‐based formulation to synthesize novel PSA cycles for a given application. In particular, a novel PSA superstructure is presented to design optimal PSA cycle configurations and evaluate CO 2 capture strategies. The superstructure is rich enough to predict a number of different PSA operating steps. The bed connections in the superstructure are governed by time‐dependent control variables, which can be varied to realize most PSA operating steps. An optimal sequence of operating steps is achieved through the formulation of an optimal control problem with the partial differential and algebraic equations of the PSA system and the cyclic steady state condition. Large‐scale optimization capabilities have enabled us to adopt a complete discretization methodology to solve the optimal control problem as a large‐scale nonlinear program, using the nonlinear optimization solver IPOPT. The superstructure approach is demonstrated for case studies related to post‐combustion CO 2 capture. In particular, optimal PSA cycles were synthesized, which maximize CO 2 recovery for a given purity, and minimize overall power consumption. The results show the potential of the superstructure to predict PSA cycles with up to 98% purity and recovery of CO 2. Moreover, for recovery of around 85% and purity of over 90%, these cycles can recover CO 2 from atmospheric flue gas with a low power consumption of 465 k Wh tonne−1 CO 2. The approach presented is, therefore, very promising and quite useful for evaluating the suitability of different adsorbents, feedstocks, and operating strategies for PSA, and assessing its usefulness for CO 2 capture. Published 2009 American Institute of Chemical Engineers AIChE J, 2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cycle Development and Design for CO 2 Capture from Flue Gas by Vacuum Swing Adsorption
Zhang, J., & Webley, P. A. (2008) · Environmental Science & Technology · doi:10.1021/es0706854 · Cited by 132
Cited by
Carbon Capture and Utilization Update
Al‐Mamoori, A., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2017) · Energy Technology · doi:10.1002/ente.201600747 · Cited by 719
Outlook of carbon capture technology and challenges
Wilberforce, T., Baroutaji, A., Soudan, B., Al-Alami, A. H., & Olabi, A. G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.424 · Cited by 462
A multi-scale framework for CO2 capture, utilization, and sequestration: CCUS and CCU
Hasan, M. M. F., First, E. L., Boukouvala, F., & Floudas, C. A. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.04.034 · Cited by 381
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Haghpanah, R., Majumder, A., Nilam, R., Rajendran, A., Farooq, S., Karimi, I. A., & Amanullah, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302658y · Cited by 287
An overview of process systems engineering approaches for process intensification: State of the art
Tian, Y., Demirel, S. E., Hasan, M. M. F., & Pistikopoulos, E. N. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.07.014 · Cited by 286
Advances in Pressure Swing Adsorption for Gas Separation
Grande, C. A. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/982934 · Cited by 285
CO2 capture from dry flue gas by vacuum swing adsorption: A pilot plant study
Krishnamurthy, S., Rao, V. R., Guntuka, S., Sharratt, P., Haghpanah, R., Rajendran, A., Amanullah, M., Karimi, I. A., & Farooq, S. (2014) · AIChE Journal · doi:10.1002/aic.14435 · Cited by 282
Toward the Development and Deployment of Large-Scale Carbon Dioxide Capture and Conversion Processes
Yuan, Z., Eden, M. R., & Gani, R. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03277 · Cited by 282
A Critical Review of CO2 Capture Technologies and Prospects for Clean Power Generation
Sifat, N. S., & Haseli, Y. (2019) · Energies · doi:10.3390/en12214143 · Cited by 226
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Maruyama, R. T., Pai, K. N., Subraveti, S. G., & Rajendran, A. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2019.102902 · Cited by 68
Green coffee based CO2 adsorbent with high performance in postcombustion conditions
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2015) · Fuel · doi:10.1016/j.fuel.2014.10.014 · Cited by 47
Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Influence of Water Vapor on CO2 Adsorption Using a Biomass-Based Carbon
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500342q · Cited by 41
Strategies for CO2 capture from different CO2 emission sources by vacuum swing adsorption technology
Ling, J., Xiao, P., Ntiamoah, A., Xu, D., Webley, P., & Zhai, Y. (2016) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2015.11.030 · Cited by 21
Performance-Based Screening of Porous Materials for Carbon Capture
Farmahini, A. H., Krishnamurthy, S., Friedrich, D., Brandani, S., & Sarkisov, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01266 · Cited by 7
Metadata
- Authors
- Agarwal, A., Biegler, L. T., & Zitney, S. E.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2009-11-09
- Volume
- 56
- Issue
- 7
- Pages
- 1813-1828
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2160381227
- Cited by
- 182
- References
- 1
- FWCI
- 12.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.