The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Influence of void fraction calculation on fidelity of CFD‐DEM simulation of gas‐solid bubbling fluidized beds
Abstract
The correct calculation of cell void fraction is pivotal in accurate simulation of two‐phase flows using a computational fluid dynamics‐discrete element method (CFD‐DEM) approach. Two classical approaches for void fraction calculations (i.e., particle centroid method or PCM and analytical approach) were examined, and the accuracy of these methodologies in predicting the particle‐fluid flow characteristics of bubbling fluidized beds was investigated. It was found that there is a critical cell size (3.82 particle diameters) beyond which the PCM can achieve the same numerical stability and prediction accuracy as those of the analytical approach. There is also a critical cell size (1/19.3 domain size) below which meso‐scale flow structures are resolved. Moreover, a lower limit of cell size (1.63 particle diameters) was identified to satisfy the assumptions of CFD‐DEM governing equations. A reference map for selecting the ideal computational cell size and the suitable approach for void fraction calculation was subsequently developed. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2000–2018, 2014
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Discrete particle simulation of two-dimensional fluidized bed
Tsuji, Y., Kawaguchi, T., & Tanaka, T. (1993) · Powder Technology · doi:10.1016/0032-5910(93)85010-7 · Cited by 2,462
Multiphase Flow And Fluidization: Continuum And Kinetic Theory Descriptions
Gidaspow, D. (2012) · Cited by 2,114
Fluid Mechanical Description of Fluidized Beds. Equations of Motion
Anderson, T. B., & Jackson, R. (1967) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160024a007 · Cited by 2,066
Multiphase flow and fluidization: Continuum and kinetic theory descriptions
Sinclair, J. L. (1995) · Powder Technology · doi:10.1016/0032-5910(95)90055-1 · Cited by 1,895
Discrete particle simulation of particulate systems: A review of major applications and findings
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.08.006 · Cited by 1,473
Assessment of rolling resistance models in discrete element simulations
Ai, J., Chen, J.-F., Rotter, J. M., & Ooi, J. Y. (2011) · Powder Technology · doi:10.1016/j.powtec.2010.09.030 · Cited by 1,073
Hoomans, B. P. B., Kuipers, J. A. M., Briels, W. J., & van Swaaij, W. P. M. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00271-5 · Cited by 1,019
Xu, B. H., & Yu, A. B. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00081-x · Cited by 959
The role of meso-scale structures in rapid gas–solid flows
Agrawal, K., Loezos, P. N., Syamlal, M., & Sundaresan, S. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005663 · Cited by 759
Rolling friction in the dynamic simulation of sandpile formation
Zhou, Y. C., Wright, B. D., Yang, R. Y., Xu, B. H., & Yu, A. B. (1999) · Physica A: Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(99)00183-1 · Cited by 717
Influence of rolling friction on single spout fluidized bed simulation
Goniva, C., Kloss, C., Deen, N. G., Kuipers, J. A. M., & Pirker, S. (2012) · Particuology · doi:10.1016/j.partic.2012.05.002 · Cited by 547
HOEF, M. A. V. D., BEETSTRA, R., & KUIPERS, J. A. M. (2005) · Journal of Fluid Mechanics · doi:10.1017/s0022112004003295 · Cited by 515
Coupled CFD–DEM simulation of fluid–particle interaction in geomechanics
Zhao, J., & Shan, T. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.02.003 · Cited by 485
Computer simulation of the packing of fine particles
Yang, R. Y., Zou, R. P., & Yu, A. B. (2000) · Physical Review E · doi:10.1103/physreve.62.3900 · Cited by 475
Discrete particle-continuum fluid modelling of gas–solid fluidised beds
Kafui, K. D., Thornton, C., & Adams, M. J. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00140-9 · Cited by 461
Flow regimes in a spout–fluid bed: A combined experimental and simulation study
Link, J. M., Cuypers, L. A., Deen, N. G., & Kuipers, J. A. M. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2005.01.027 · Cited by 349
Open-source MFIX-DEM software for gas–solids flows: Part I—Verification studies
Garg, R., Galvin, J., Li, T., & Pannala, S. (2012) · Powder Technology · doi:10.1016/j.powtec.2011.09.019 · Cited by 343
Direct simulation of fluid particle motions
Hu, H. H., Joseph, D. D., & Crochet, M. J. (1992) · Theoretical and Computational Fluid Dynamics · doi:10.1007/bf00717645 · Cited by 339
Wang, J., van der Hoef, M. A., & Kuipers, J. A. M. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.09.028 · Cited by 284
Discrete particle simulation of gas fluidization of ellipsoidal particles
Zhou, Z. Y., Pinson, D., Zou, R. P., & Yu, A. B. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.08.041 · Cited by 245
Dynamics of gas–solid fluidised beds with non-spherical particle geometry
Hilton, J. E., Mason, L. R., & Cleary, P. W. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.028 · Cited by 184
Open-source MFIX-DEM software for gas-solids flows: Part II — Validation studies
Li, T., Garg, R., Galvin, J., & Pannala, S. (2012) · Powder Technology · doi:10.1016/j.powtec.2011.09.020 · Cited by 182
DEM simulation of gas–solid flow behaviors in spout-fluid bed
Zhong, W., Xiong, Y., Yuan, Z., & Zhang, M. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2005.09.015 · Cited by 181
Tsuji, T., Yabumoto, K., & Tanaka, T. (2008) · Powder Technology · doi:10.1016/j.powtec.2007.11.042 · Cited by 180
Gilabert, F. A., Roux, J.-N., & Castellanos, A. (2007) · Physical Review E · doi:10.1103/physreve.75.011303 · Cited by 178
Numerical simulation of the gas–solid flow in a bed with lateral gas blasting
Xu, B. H., Yu, A. B., Chew, S. J., & Zulli, P. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00223-5 · Cited by 168
A numerical study of fluidization behavior of Geldart A particles using a discrete particle model
Ye, M., Hoef, V. D. M. M., & Kuipers, J. A. M. (2004) · Powder Technology · doi:10.1016/j.powtec.2003.10.012 · Cited by 151
Characterization of fluid dynamics of fluidized beds by analysis of pressure fluctuations
Sasic, S., Leckner, B. G., & Johnsson, F. (2007) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2007.03.001 · Cited by 149
Renzo, A. D., & Maio, F. P. D. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.009 · Cited by 148
Gas-particle interactions in dense gas-fluidized beds
Li, J., & Kuipers, J. A. M. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00599-7 · Cited by 144
Efficient parallel CFD-DEM simulations using OpenMP
Amritkar, A., Deb, S., & Tafti, D. K. (2013) · Journal of Computational Physics · doi:10.1016/j.jcp.2013.09.007 · Cited by 142
Validation of a discrete element model using magnetic resonance measurements
Müller, C. R., Scott, S. A., Holland, D. J., Clarke, B. C., Sederman, A. J., Dennis, J. S., & Gladden, L. F. (2009) · Particuology · doi:10.1016/j.partic.2009.04.002 · Cited by 134
Determination of contact parameters for discrete element method simulations of granular systems
Malone, K. F., & Xu, B. H. (2008) · Particuology · doi:10.1016/j.partic.2008.07.012 · Cited by 134
Algorithms in a Robust Hybrid CFD-DEM Solver for Particle-Laden Flows
Xiao, H., & Sun, J. (2010) · Communications in Computational Physics · doi:10.4208/cicp.260509.230210a · Cited by 114
CFD–DEM simulation of gas–solid reacting flows in fluid catalytic cracking (FCC) process
Wu, C., Cheng, Y., Ding, Y., & Jin, Y. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.06.026 · Cited by 113
CFD study of the minimum bubbling velocity of Geldart A particles in gas-fluidized beds
Wang, J., van der Hoef, M. A., & Kuipers, J. A. M. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.03.023 · Cited by 113
A CFD–DEM study of the cluster behavior in riser and downer reactors
Zhang, M. H., Chu, K., Wei, F., & Yu, A. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.11.036 · Cited by 109
Three-dimensional discrete particle model for gas–solid fluidized beds on unstructured mesh
Wu, C. L., Berrouk, A. S., & Nandakumar, K. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.05.024 · Cited by 103
CFD–DEM modeling of gas–solid flow and catalytic MTO reaction in a fluidized bed reactor
Zhuang, Y.-Q., Chen, X. D., Luo, Z., & Xiao, J. (2013) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2013.08.007 · Cited by 100
CFD–DEM study of effect of bed thickness for bubbling fluidized beds
Li, T., Gopalakrishnan, P., Garg, R., & Shahnam, M. (2012) · Particuology · doi:10.1016/j.partic.2012.02.006 · Cited by 88
An extended DEM–CFD model for char combustion in a bubbling fluidized bed combustor of inert sand
Geng, Y., & Che, D. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.10.011 · Cited by 84
Fluid‐particle drag in inertial polydisperse gas–solid suspensions
Holloway, W., Yin, X., & Sundaresan, S. (2009) · AIChE Journal · doi:10.1002/aic.12127 · Cited by 75
Wang, J., van der Hoef, M. A., & Kuipers, J. A. M. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.06.004 · Cited by 41
Dense particulate flow model on unstructured mesh
Wu, C. L., Zhan, J. M., Li, Y. S., & Lam, K. S. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.04.033 · Cited by 41
Cited by
Continuum theory for dense gas-solid flow: A state-of-the-art review
Wang, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2019.115428 · Cited by 368
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Review and implementation of CFD-DEM applied to chemical process systems
Golshan, S., Sotudeh-Gharebagh, R., Zarghami, R., Mostoufi, N., Blais, B., & Kuipers, J. A. M. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115646 · Cited by 270
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100930 · Cited by 266
Computational Fluid Dynamics of Reacting Flows at Surfaces: Methodologies and Applications
Micale, D., Ferroni, C., Uglietti, R., Bracconi, M., & Maestri, M. (2022) · Chemie Ingenieur Technik · doi:10.1002/cite.202100196 · Cited by 41
Metadata
- Authors
- Peng, Z., Doroodchi, E., Luo, C., & Moghtaderi, B.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2014-03-11
- Volume
- 60
- Issue
- 6
- Pages
- 2000-2018
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2042309274
- Cited by
- 359
- References
- 44
- FWCI
- 10.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.