The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A Porous Pyrochlore Y2[Ru1.6Y0.4]O7–δ Electrocatalyst for Enhanced Performance towards the Oxygen Evolution Reaction in Acidic Media
Open accessAbstract
A robust porous structure is often needed for practical applications in electrochemical devices, such as fuel cells, batteries, and electrolyzers. While templating approach is useful for the preparation of porous materials in general, it is not effective for the synthesis of oxide‐based electrocatalysts owing to the chemical instability of disordered porous materials thus created. Now the synthesis of phase‐pure porous yttrium ruthenate pyrochlore oxide using an unconventional porogen of perchloric acid is presented. The lattice oxygen defects are formed by the mixed‐valence state of Ru 4+/5+ through the partial substitution of Ru 4+ with Y 3+ cations, leading to the formation of mixed B‐site Y 2[Ru 1.6 Y 0.4]O 7−δ. This porous Y 2[Ru 1.6 Y 0.4]O 7−δ electrocatalyst exhibits a turnover frequency (TOF) of 560 s−1 (at 1.5 V versus RHE) for the oxygen evolution reaction, which is two orders of magnitude higher than that of the RuO 2 reference catalyst (5.41 s−1).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces
Man, I. C., Su, H., Calle‐Vallejo, F., Hansen, H. A., Martínez, J. I., Inoglu, N. G., Kitchin, J., Jaramillo, T. F., Nørskov, J. K., & Rossmeisl, J. (2011) · ChemCatChem · doi:10.1002/cctc.201000397 · Cited by 4,769
McCrory, C. C. L., Jung, S., Ferrer, I. M., Chatman, S. M., Peters, J. C., & Jaramillo, T. F. (2015) · Journal of the American Chemical Society · doi:10.1021/ja510442p · Cited by 4,145
Homogeneously dispersed multimetal oxygen-evolving catalysts
Zhang, B., Zheng, X., Voznyy, O., Comin, R., Bajdich, M., García-Melchor, M., Han, L., Xu, J., Liu, M., Zheng, L., et al. (2016) · Science · doi:10.1126/science.aaf1525 · Cited by 2,447
Self-citationKim, J., Shih, P.-C., Tsao, K.-C., Pan, Y.-T., Yin, X., Sun, C.-J., & Yang, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06808 · Cited by 501
Self-citationHighly Active and Stable Iridium Pyrochlores for Oxygen Evolution Reaction
Lebedev, D., Povia, M., Waltar, K., Abdala, P. M., Castelli, I. E., Fabbri, E., Blanco, M. V., Fedorov, A., Copéret, C., Marzari, N., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00766 · Cited by 228
Cited by
Recent Development of Oxygen Evolution Electrocatalysts in Acidic Environment
An, L., Wei, C., Lu, M., Liu, H., Chen, Y., Scherer, G. G., Fisher, A. C., Xi, P., Xu, Z. J., & Yan, C. (2021) · Advanced Materials · doi:10.1002/adma.202006328 · Cited by 897
Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction
Li, L., Wang, P., Shao, Q., & Huang, X. (2021) · Advanced Materials · doi:10.1002/adma.202004243 · Cited by 672
Qin, Y., Yu, T., Deng, S., Zhou, X.-Y., Lin, D., Zhang, Q., Jin, Z., Zhang, D., He, Y.-B., Qiu, H.-J., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31468-0 · Cited by 596
Self-citationActive Site Engineering in Porous Electrocatalysts
Chen, H., Liang, X., Liu, Y., Ai, X., Asefa, T., & Zou, X. (2020) · Advanced Materials · doi:10.1002/adma.202002435 · Cited by 595
Chen, S., Huang, H., Jiang, P., Yang, K., Diao, J., Gong, S., Liu, S., Huang, M., Wang, H., & Chen, Q. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04922 · Cited by 574
Shi, Z., Wang, Y., Li, J., Wang, X., Wang, Y., Li, Y., Xu, W., Jiang, Z., Liu, C., Xing, W., et al. (2021) · Joule · doi:10.1016/j.joule.2021.05.018 · Cited by 554
High-entropy alloys in electrocatalysis: from fundamentals to applications
Ren, J.-T., Chen, L., Wang, H.-Y., & Yuan, Z.-Y. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00557g · Cited by 551
Interfacial Assembly and Applications of Functional Mesoporous Materials
Duan, L., Wang, C., Zhang, W., Ma, B., Deng, Y., Li, W., & Zhao, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00236 · Cited by 368
Mesoporous Materials for Electrochemical Energy Storage and Conversion
Zu, L., Zhang, W., Qu, L., Liu, L., Li, W., Yu, A., & Zhao, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002152 · Cited by 366
Tailoring Lattice Oxygen Binding in Ruthenium Pyrochlores to Enhance Oxygen Evolution Activity
Kuznetsov, D. A., Naeem, M. A., Kumar, P. V., Abdala, P. M., Fedorov, A., & Müller, C. R. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c01135 · Cited by 365
Locking the lattice oxygen in RuO2 to stabilize highly active Ru sites in acidic water oxidation
Ping, X., Liu, Y., Zheng, L., Song, Y., Guo, L., Chen, S., & Wei, Z. (2024) · Nature Communications · doi:10.1038/s41467-024-46815-6 · Cited by 363
A review on molten salt synthesis of metal oxide nanomaterials: Status, opportunity, and challenge
Gupta, S. K., & Mao, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100734 · Cited by 362
Rong, C., Dastafkan, K., Wang, Y., & Zhao, C. (2023) · Advanced Materials · doi:10.1002/adma.202211884 · Cited by 361
Regulating Electrocatalysts via Surface and Interface Engineering for Acidic Water Electrooxidation
Shan, J., Zheng, Y., Shi, B., Davey, K., & Qiao, S.-Z. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01758 · Cited by 339
Electrocatalysts for the Oxygen Evolution Reaction in Acidic Media
Lin, Y., Dong, Y., Wang, X., & Chen, L. (2023) · Advanced Materials · doi:10.1002/adma.202210565 · Cited by 318
Adsorption Energy in Oxygen Electrocatalysis
Zhang, J., Yang, H. B., Zhou, D., & Liu, B. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01003 · Cited by 299
Self-citationAdvances in Oxygen Evolution Electrocatalysts for Proton Exchange Membrane Water Electrolyzers
Chen, Z., Guo, L., Pan, L., Yan, T., He, Z., Li, Y., Shi, C., Huang, Z., Zhang, X., & Zou, J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103670 · Cited by 298
Shi, Z., Wang, X., Ge, J., Liu, C., & Xing, W. (2020) · Nanoscale · doi:10.1039/d0nr02410d · Cited by 290
Zhang, L., Cai, W., & Bao, N. (2021) · Advanced Materials · doi:10.1002/adma.202100745 · Cited by 277
Niu, S., Kong, X.-P., Li, S., Zhang, Y., Wu, J., Zhao, W., & Xu, P. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120442 · Cited by 255
Multicomponent transition metal oxides and (oxy)hydroxides for oxygen evolution
Han, J., & Guan, J. (2023) · Nano Research · doi:10.1007/s12274-022-4874-7 · Cited by 145
Xu, W., Huang, H., Wu, X., Yuan, Y., Liu, Y., Wang, Z., Zhang, D., Qin, Y., Lai, J., & Wang, L. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.110013 · Cited by 52
Self-citation
Metadata
- Authors
- Kim, J., Shih, P., Qin, Y., Al‐Bardan, Z., Sun, C., & Yang, H.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2018-09-19
- Volume
- 57
- Issue
- 42
- Pages
- 13877-13881
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2888816235
- Cited by
- 173
- References
- 6
- FWCI
- 3.11
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.