The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Evaluation of electrical conductivity models for conductive polymer composites
Abstract
The electrical conductivity of polymeric materials can be increased by the addition of carbon fillers, such as carbon fibers and graphite. The resulting composites could be used in applications such as interference shielding and electrostatic dissipation. Electrical conductivity models are often proposed to predict the conductivity behavior of these materials in order to achieve more efficient material design that could reduce costly experimental work. The electrical conductivity of carbon‐filled polymers was studied by adding four single fillers to nylon 6,6 and polycarbonate in increasing concentrations. The fillers used in this project include chopped and milled forms of polyacrylonitrile (PAN) carbon fiber, Thermocarb TM Specialty Graphite, and Ni‐coated PAN carbon fiber. Material was extruded and injection‐molded into test specimens, and then the electrical conductivity was measured. Data analysis included a comparison of the results to existing conductivity models. The results show that the model proposed by Mamunya, which takes into account the filler aspect ratio and the surface energy of the filler and polymer, most closely matched the conductivity data. This information will then be used in the development of improved conductivity models. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1341–1356, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kirkpatrick, S. (1973) · Reviews of Modern Physics · doi:10.1103/revmodphys.45.574 · Cited by 5,260
Cited by
Li, J., & Kim, J.-K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.11.010 · Cited by 516
Antunes, R. A., de Oliveira, M. C. L., Ett, G., & Ett, V. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.041 · Cited by 320
Electrical and thermal behavior of polypropylene filled with copper particles
Boudenne, A., Ibos, L., Fois, M., Majesté, J. C., & Géhin, E. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.02.005 · Cited by 264
Metadata
- Authors
- Clingerman, M. L., King, J. A., Schulz, K. H., & Meyers, J. D.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2001-12-05
- Volume
- 83
- Issue
- 6
- Pages
- 1341-1356
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2085049235
- Cited by
- 210
- References
- 1
- FWCI
- 2.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.