The DOI matches its Crossref record.
Morphology and mechanical properties of unidirectional sisal– epoxy composites
Abstract
Plant fibers are of increasing interest for use in composite materials. They are renewable resources and waste management is easier than with glass fibers. In the present study, longitudinal stiffness and strength as well as morphology of unidirectional sisal–epoxy composites manufactured by resin transfer molding (RTM) were studied. Horseshoe‐shaped sisal fiber bundles (technical fibers) were nonuniformly distributed in the matrix. In contrast to many wood composites, lumen was not filled by polymer matrix. Technical sisal fibers showed higher effective modulus when included in the composite material than in the technical fiber test (40 GPa as compared with 24 GPa). In contrast, the effective technical fiber strength in the composites was estimated to be around 400 MPa in comparison with a measured technical fiber tensile strength of 550 MPa. Reasons for these phenomena are discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2358–2365, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationNatural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Self-citationKalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101271 · Cited by 1,034
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
Idicula, M., Malhotra, S. K., Joseph, K., & Thomas, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.023 · Cited by 530
A critical review of all-cellulose composites
Huber, T., Müssig, J., Curnow, O., Pang, S., Bickerton, S., & Staiger, M. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-5774-3 · Cited by 451
Charlet, K., Baley, C., Morvan, C., Jernot, J. P., Gomina, M., & Bréard, J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.03.006 · Cited by 442
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
Puglia, D., Biagiotti, J., & Kenny, J. M. (2005) · Journal of Natural Fibers · doi:10.1300/j395v01n03_03 · Cited by 390
Mathew, A. P., Oksman, K., & Sain, M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23346 · Cited by 363
Self-citationEffect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite
Coroller, G., Lefeuvre, A., Le Duigou, A., Bourmaud, A., Ausias, G., Gaudry, T., & Baley, C. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.03.018 · Cited by 254
Metadata
- Authors
- Oksman, K., Wallström, L., Berglund, L. A., & Filho, R. D. T.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-04-12
- Volume
- 84
- Issue
- 13
- Pages
- 2358-2365
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2013052100
- Cited by
- 251
- References
- 0
- FWCI
- 7.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.