Crystalline and supermolecular structure of polylactide in relation to the crystallization method
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The effect of thermal treatment on the crystalline and supermolecular structure of polylactide was investigated. The samples were isothermally crystallized by two methods, the crystallization temperature being reached (1) via cooling from the melt and (2) via heating from the glassy, amorphous state. The samples were crystallized over a broad temperature range of 70–130°C. The glassy state was produced by the quenching of the polymer melt to ambient temperature. The morphology and structural features of the samples were examined with X‐ray techniques (wide‐angle and small‐angle X‐ray scattering), small‐angle light scattering, polarizing light microscopy, and differential scanning calorimetry. The results showed similar structures on the lamellar level for samples prepared by the two methods under similar time and temperature conditions. Crystal perfection increased with the crystallization temperature. This was accompanied by an evolution of the spherulitic structure: the spherulites were larger in samples crystallized via cooling from the melt than those in samples crystallized via heating from the glassy, amorphous state. The thermal properties were influenced markedly by the initial crystallinity of the polymer, but differentiation of the supermolecular structures between samples crystallized according to the two protocols did not affect their thermal behavior. The structure of each sample was correlated with its viscoelastic properties. The viscoelastic response was sensitive to the crystallinity level but depended less on the sizes of the spherulites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1386–1395, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Cited by
Improving mechanical performance of injection molded PLA by controlling crystallinity
Harris, A. M., & Lee, E. C. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27261 · Cited by 545
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Plasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Metadata
- Authors
- Pluta, M., & Galeski, A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-08-27
- Volume
- 86
- Issue
- 6
- Pages
- 1386-1395
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2085183463
- Cited by
- 106
- References
- 2
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Crystalline and supermolecular structure of polylactide in relation to the crystallization method. https://app.cochat.ai/papers/10.1002/app.11280
- The paper
- Pluta, M., & Galeski, A. (2002). Crystalline and supermolecular structure of polylactide in relation to the crystallization method. Journal of Applied Polymer Science. https://doi.org/10.1002/app.11280
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.