Plasticization of Poly(l-lactide) with Poly(propylene glycol)
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
A new plasticizer for poly(L-lactide) (PLA)-poly(propylene glycol) (PPG) is proposed. The advantage of using PPG is that it does not crystallize, has low glass transition temperature, and is miscible with PLA. PLA was plasticized with PPGs with nominal Mw of 425 and 1000 g/mol. Poly(ethylene glycol) (PEG), long known as a plasticizer for PLA, with nominal Mw of 600 g/mol, was also used to plasticize PLA for comparison. The thermal and tensile properties of PLA and PLA with 5-12.5 wt % of the plasticizers were studied. In blends of PLA with PPGs the glass transition temperature was lower than that of neat PLA. Both PPGs enhanced the crystallizability of PLA albeit less than PEG. All of the plasticizers increased also the ability of PLA to plastic deformation which was reflected in a decrease of yield stress and in an increase of elongation at break. The effect was enhanced by the higher PPG content and also by lower molecular weight of PPG. A phase separation occurred only in the blend containing 12.5 wt % of PPG with higher molecular weight. The evidences of crazing were found in deformed samples of PLA with low plasticizer content, whereas the samples with higher content of plasticizers crystallized due to deformation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Thermal characterization of polymeric materials
(1997) · Choice Reviews Online · doi:10.5860/choice.35-0290 · Cited by 657
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Self-citationPlasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Concise polymeric materials encyclopedia
(1999) · Choice Reviews Online · doi:10.5860/choice.36-3664 · Cited by 494
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Research works printed but not linked: 2
- Pluta M., 2006, Part B: Polym. Phys
- Cyras V. P., 1999, Polym. Intern., 48, 705, 10.1002/(SICI)1097-0126(199908)48:8<705::AID-PI205>3.0.CO;2-P · doi:10.1002/(sici)1097-0126(199908)48:8<705::aid-pi205>3.0.co;2-p
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Metadata
- Authors
- Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M.
- Affiliations
- Centrum Badań Molekularnych i Makromolekularnych Polskiej Akademii Nauk (PL)
- Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, 90 363 Lodz, Poland
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-06-06
- Volume
- 7
- Issue
- 7
- Pages
- 2128-2135
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2088024029
- Cited by
- 320
- References
- 25
- Citations by year
- 2026: 7 · 2025: 12 · 2024: 15 · 2023: 14 · 2022: 12 · 2021: 13 · 2020: 19 · 2019: 15 · 2018: 19 · 2017: 29 · 2016: 26 · 2015: 20 · 2014: 27 · 2013: 18 · 2012: 15
- FWCI
- 5.14
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), polypropylene glycol, plasticizers, polyethylene glycol, polymer blends, glass transition temperature, crystallization, tensile properties, yield stress, elongation at break, phase separation, crazing, molecular weight effects
- MeSH terms
- Calorimetry, Differential Scanning, Hot Temperature, Microscopy, Electron, Scanning, Microscopy, Polarization, Plastics, Polyesters, Tensile Strength, Propylene Glycol
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Plasticization of Poly(l-lactide) with Poly(propylene glycol). https://app.cochat.ai/papers/10.1021/bm060089m
- The paper
- Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006). Plasticization of Poly(l-lactide) with Poly(propylene glycol). Biomacromolecules. https://doi.org/10.1021/bm060089m
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.