The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Characterization of alkali‐treated jute fibers for physical and mechanical properties
Abstract
Changes occurring in jute fibers when treated with a 5% concentration of a NaOH solution for 0, 2, 4, 6, and 8 h were characterized by weight loss, linear density, tenacity, modulus, FTIR, and X‐ray measurements. A 9.63% weight loss was measured during 2 h of treatment with a drop of hemicellulose content from 22 to 12.90%. The linear density value showed no change until 2 h of treatment followed by a decrease from 33.0 to 14.5 denier by 56% after 6 h of treatment. The tenacity and modulus of the fibers improved by 45 and 79%, respectively, and the percent breaking strain was reduced by 23% after 8 h of treatment. X‐ray diffractograms showed increase in crystallinity of the fibers only after 6 h of treatment, while FTIR measurements showed much of the changes occurring by 2 h of treatment with an increased amount of OH groups. By measuring the rate of change of the modulus, tenacity, and percent breaking strain with the time of treatment, a clear transition was apparent at 4 h of treatment with the dissolution of hemicellulose, causing a weight loss and drop in the linear density before and development of crystallinity with an improvement in the properties after the transition time. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1013–1020, 2001
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gassan, J., & Bledzki, A. K. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(98)00169-9 · Cited by 697
Gassan, J., & Bledzki, A. K. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(97)00042-0 · Cited by 444
The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites
Bisanda, E. T. N., & Ansell, M. P. (1991) · Composites Science and Technology · doi:10.1016/0266-3538(91)90026-l · Cited by 438
Alkali treatment of coir fibres for coir-polyester composites
Prasad, S. V., Pavithran, C., & Rohatgi, P. K. (1983) · Journal of Materials Science · doi:10.1007/bf01111964 · Cited by 346
Alkali treatment of jute fibers: Relationship between structure and mechanical properties
Gassan, J., & Bledzki, A. K. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990124)71:4<623::aid-app14>3.0.co;2-k · Cited by 321
Jute-reinforced polyester composites
Roe, P. J., & Ansell, M. P. (1985) · Journal of Materials Science · doi:10.1007/bf00552393 · Cited by 291
Mechanical properties of jute-reinforced plastics
Shah, A., & Lakkad, S. C. (1981) · Fibre Science and Technology · doi:10.1016/0015-0568(81)90030-0 · Cited by 203
Structural Mechanics of Jute: The Effects of Hemicellulose or Lignin Removal
Mukherjee, A., Ganguly, P. K., & Sur, D. (1993) · Journal of the Textile Institute · doi:10.1080/00405009308658967 · Cited by 132
Studies of acetylation of jute using simplified procedure and its characterization
Rana, A. K., Basak, R. K., Mitra, B. C., Lawther, M., & Banerjee, A. N. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970523)64:8<1517::aid-app9>3.0.co;2-k · Cited by 123
Sreenivasan, S., Iyer, P. B., & Iyer, K. R. K. (1996) · Journal of Materials Science · doi:10.1007/bf00367891 · Cited by 102
Pal, S. K., Mukhopadhyay, D., Sanyal, S., et al. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350412 · Cited by 50
Fine Structure of Chemically Modified Flax Fibre
Sharma, H. S. S., Fraser, T. W., McCall, D., et al. (1995) · Journal of the Textile Institute · doi:10.1080/00405009508659033 · Cited by 39
Cited by
Sair, S., Oushabi, A., Kammouni, A., Tanane, O., Abboud, Y., Oudrhiri Hassani, F., Laachachi, A., & El Bouari, A. (2017) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2017.10.012 · Cited by 97
Alternative Materials from Agro-Industry for Wood Panel Manufacturing—A Review
Neitzel, N., Hosseinpourpia, R., Walther, T., & Adamopoulos, S. (2022) · Materials · doi:10.3390/ma15134542 · Cited by 53
Molavi, F. K., Ghasemi, I., Messori, M., & Esfandeh, M. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01366-6 · Cited by 24
Metadata
- Authors
- Ray, D., & Sarkar, B. K.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2001-03-02
- Volume
- 80
- Issue
- 7
- Pages
- 1013-1020
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2092373734
- Cited by
- 373
- References
- 12
- FWCI
- 5.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
