Characterization of poly(L‐lactic acid) fibers produced by melt spinning
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Biodegradable poly(L‐lactic acid) (PLLA) fibers were processed by a two‐step melt‐spinning method (melt extrusion and hot draw) from PLLA with three different viscosity‐average molecular weights (494,600, 304,700, and 262,800). Before spinning, the polymer flakes were first milled into powders and dried under vacuum. Viscosity‐average molecular weight of PLLA following the fabrication process was monitored. Tensile properties of as‐spun and hot‐drawn fibers were investigated. Morphology of the PLLA fibers was viewed under a scanning electron microscope. Crystallinity of these fibers was assessed by thermogram analysis of differential scanning calorimetry. Results showed that the extent of decrease in the viscosity‐average molecular weight of PLLA dropped sharply by 13.1–19.5% during pulverization and by 39.0–69.0% during melt‐extrusion. The hot‐draw process in this study had a little effect on the viscosity‐average molecular weight of PLLA. Smoother fibers could be obtained for the die temperature at least 230°C for raw materials with higher crystallinity (more than 75%) and at least 220°C for raw materials with lower crystallinity (about 60%). The as‐spun fibers showed crystallinity of 16.5–22.8% and the value increased to 50.3–63.7% after hot draw. Tensile moduli of the as‐spun fibers were in the range of 1.2–2.4 GPa, which were raised to 3.6–5.4 GPa after hot draw. The final PLLA fibers with 110–160 μm diameters showed tensile strengths of 300–600 MPa. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 251–260, 2001
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Cited by
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Zeng, R.-C., Cui, L.-Y., Jiang, K., Liu, R., Zhao, B.-D., & Zheng, Y.-F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00527 · Cited by 314
Poly(Vinyl Alcohol)-Based Nanofibrous Electrospun Scaffolds for Tissue Engineering Applications
Teixeira, M. A., Amorim, M. T. P., & Felgueiras, H. P. (2019) · Polymers · doi:10.3390/polym12010007 · Cited by 287
Liu, Y., Cao, H., Ye, L., Coates, P., Caton-Rose, F., & Zhao, X. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06514 · Cited by 29
Metadata
- Authors
- Yuan, X., Mak, A. F. T., Kwok, K. W., Yung, B. K. O., & Yao, K.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2001-04-18
- Volume
- 81
- Issue
- 1
- Pages
- 251-260
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2086036100
- Cited by
- 143
- References
- 2
- FWCI
- 3.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.