The DOI matches its Crossref record.
Polymers for stabilization of colloidal cobalt particles
Abstract
A process for preparing metiallic cobalt particles of uniform size in the 10–1000 A. range is described. Dicobalt octacarbonyl is thermally decomposed in solutions of dispersant polymers to form stable colloids of discrete particles which are separated by polymer coatings. Variatin of polymer composition, molecular weight, and solvent used results in a variation of particle size and colloid stability. Preparation of single‐domain ferromagnetic cobalt particles with good magnetic properties depends on a very delicate balance between dispersant polymer, solvent, and the growing metal particle. A number of addition and condensation polymers can act as dispersants. The most successful are linear addition polymers of high molecular weight having relatively nonpolar backbones. Ideally, groups with a polarity greater than the backbone are attached at intervals of at least 100 but not more than 200 backbone atoms. The need for more polar groups and their spacing becomes les critical with increasing polymer molecular weight. The polymers appear to stabilize the metal particles by adsorption to form a thick fiml which separates the particles sufficiently to keep van der Walls energy of attraction below thermal energy levels. The solvent must solubilize the polymer coating sufficiently to allow the particle to grow. It should be less polar than the most polar group in the polymer and be chemically inert.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent Advances in the Liquid-Phase Syntheses of Inorganic Nanoparticles
Cushing, B. L., Kolesnichenko, V. L., & O'Connor, C. J. (2004) · Chemical Reviews · doi:10.1021/cr030027b · Cited by 2,913
Synthesis, Properties, and Applications of Iron Nanoparticles
Huber, D. L. (2005) · Small · doi:10.1002/smll.200500006 · Cited by 1,436
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
Nanoscopic Metal Particles − Synthetic Methods and Potential Applications
Bönnemann, H., & Richards, R. M. (2001) · European Journal of Inorganic Chemistry · doi:10.1002/1099-0682(200109)2001:10<2455::aid-ejic2455>3.0.co;2-z · Cited by 768
Synthesis, structure and properties of metal nanoclusters
Wilcoxon, J. P., & Abrams, B. L. (2006) · Chemical Society Reviews · doi:10.1039/b517312b · Cited by 760
Measurements of particle size distribution parameters in ferrofluids
Chantrell, R., Popplewell, J., & Charles, S. (1978) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1978.1059918 · Cited by 718
Shliomis, M. I. (1974) · Soviet Physics Uspekhi · doi:10.1070/pu1974v017n02abeh004332 · Cited by 626
Murray, C. B., Sun, S., Doyle, H., & Betley, T. (2001) · MRS Bulletin · doi:10.1557/mrs2001.254 · Cited by 533
Naked metal nanoparticles from metal carbonyls in ionic liquids: Easy synthesis and stabilization
Vollmer, C., & Janiak, C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.03.005 · Cited by 281
Ely, T. O., Amiens, C., Chaudret, B., Snoeck, E., Verelst, M., Respaud, M., & Broto, J.-M. (1999) · Chemistry of Materials · doi:10.1021/cm980675p · Cited by 255
Magnetic Nanoparticles as MRI Contrast Agents
Avasthi, A., Caro, C., Pozo-Torres, E., Leal, M. P., & García-Martín, M. L. (2020) · Topics in Current Chemistry · doi:10.1007/s41061-020-00302-w · Cited by 253
Efficient fuel cell catalysts emerging from organometallic chemistry
Bönnemann, H., & Khelashvili, G. (2010) · Applied Organometallic Chemistry · doi:10.1002/aoc.1613 · Cited by 30
Metadata
- Authors
- Hess, P. H., & Parker, P. H.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1966-12
- Volume
- 10
- Issue
- 12
- Pages
- 1915-1927
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2045401641
- Cited by
- 220
- References
- 0
- FWCI
- 1.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.