The DOI matches its Crossref record.
The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesives
Abstract
The fracture behavior of a piperidine/bisphenol A diglycidyl ether (A) resin has been determined in bulk and as an adhesive using the linear elastic fracture methods developed by Mostovoy1. The effect of adding carboxy-terminated butadiene–acrylonitrile (CTBN) elastomer to resin A was investigated. The opening-mode fracture energy () of resin A was 120 to 150 J/m2, and largely attributable to plastic deformation. Fractographic evidence was obtained for plastic flow at the crack tip during crack initiation. Propagation was unstable due to the rate dependence of the plasticity. There were no significant differences in the bulk and adhesive fracture behavior. Addition of 5–15% CTBN to resin A produced minute elastomer particles which increased to ∼4000J/m2 (at 15%). Further CTBN addition resulted in an elastomer–epoxy blend and a decrease in fracture energy. Fractography again indicated that crack initiation involved plastic deformation but that the elastomer had greatly increased the volume in which the deformation occurred. The adhesive fracture of the elastomer–epoxy was found to be strongly dependent on the crack-tip deformation zone size (ryc) in that was a maximum when bond thickness was equal to 2 ryc. At bond thicknesses less than 2 ryc, there was a restraint on the development of the plastic zone resulting in lower values.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Toughening mechanisms in elastomer-modified epoxies: Part 1 Mechanical studies
Yee, A. F., & Pearson, R. A. (1986) · Journal of Materials Science · doi:10.1007/bf01114293 · Cited by 857
Kinloch, A. J., Shaw, S. J., Tod, D. A., & Hunston, D. L. (1983) · Polymer · doi:10.1016/0032-3861(83)90070-8 · Cited by 787
Toughening mechanisms in elastomer-modified epoxies: Part 3 The effect of cross-link density
Pearson, R. A., & Yee, A. F. (1989) · Journal of Materials Science · doi:10.1007/bf01174528 · Cited by 724
Toughening mechanisms in elastomer-modified epoxies: Part 2 Microscopy studies
Pearson, R. A., & Yee, A. F. (1986) · Journal of Materials Science · doi:10.1007/bf01114294 · Cited by 594
Pearson, R. A., & Yee, A. F. (1991) · Journal of Materials Science · doi:10.1007/bf01184979 · Cited by 537
Rubber-Toughened Epoxies: A Critical Review
Bagheri, R., Marouf, B. T., & Pearson, R. A. (2009) · Polymer Reviews · doi:10.1080/15583720903048227 · Cited by 455
A model for the toughness of epoxy-rubber particulate composites
Kunz-Douglass, S., Beaumont, P. W. R., & Ashby, M. F. (1980) · Journal of Materials Science · doi:10.1007/bf00551799 · Cited by 392
Impact and delamination failure of woven-fabric composites
Kim, J.-K., & Sham, M.-L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00166-9 · Cited by 360
The science of adhesion: Part 2 Mechanics and mechanisms of failure
Kinloch, A. J. (1982) · Journal of Materials Science · doi:10.1007/bf00540361 · Cited by 265
A Review on Rubber-Enhanced Polymeric Materials
Caldona, E. B., De Leon, A. C. C., Pajarito, B. B., & Advincula, R. C. (2017) · Polymer Reviews · doi:10.1080/15583724.2016.1247102 · Cited by 74
Metadata
- Authors
- Bascom, W. D., Cottington, R. L., Jones, R. L., & Peyser, P.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1975-09
- Volume
- 19
- Issue
- 9
- Pages
- 2545-2562
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1982813314
- Cited by
- 483
- References
- 0
- FWCI
- 22.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.