Properties of blends of starch and synthetic polymers containing anhydride groups
The DOI matches its Crossref record.
Abstract
Corn starch was blended with styrene maleic anhydride copolymer (SMA), ethylene‐propylene‐g‐maleic anhydride copolymer (EPMA), and corresponding nonfunctional polystyrene and ethylene propylene copolymers. The concentration of starch in the blend was varied between 50 and 80% by weight. The torque generated during blending is reported increasing starch content for starch/SMA blends: the reverse was true for starch/EPMA blends. The torque was higher for the blends of the anhydride functional polymers compared to the blends of corresponding nonfunctional polymers. Water absorption of the blends increased with an increase in the starch content. Starch/SMA blends made at higher mixer speed or time were more water sensitive. Blends containing EPMA absorbed less water than SMA blends containing the same weight fraction of starch. Tensile strengths of blends containing functional groups were superior compared to the blends made from nonfunctional polymers. When the starch contents increased from 60 to 70%, the tensile strength remained unchanged for SMA blend but increased for EPMA blend. All samples supported the growth of microorganisms, which increased with increasing starch content. © 1994 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
Mechanical Properties of Poly(lactic acid)/Starch Composites Compatibilized by Maleic Anhydride
Zhang, J.-F., & Sun, X. (2004) · Biomacromolecules · doi:10.1021/bm0400022 · Cited by 494
Improvement of starch film performances using cellulose microfibrils
Dufresne, A., & Vignon, M. R. (1998) · Macromolecules · doi:10.1021/ma971532b · Cited by 409
Sharma, S., Sudhakara, P., Singh, J., Ilyas, R. A., Asyraf, M. R. M., & Razman, M. R. (2021) · Polymers · doi:10.3390/polym13162623 · Cited by 288
Biodegradation of poly(lactic acid)/starch/coir biocomposites under controlled composting conditions
Iovino, R., Zullo, R., Rao, M. A., Cassar, L., & Gianfreda, L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.011 · Cited by 286
Properties of melt processed chitosan and aliphatic polyester blends
Correlo, V. M., Boesel, L. F., Bhattacharya, M., Mano, J. F., Neves, N. M., & Reis, R. L. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.04.055 · Cited by 261
Self-citationPolycaprolactone/starch composite: Fabrication, structure, properties, and applications
Ali Akbari Ghavimi, S., Ebrahimzadeh, M. H., Solati-Hashjin, M., & Abu Osman, N. A. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35371 · Cited by 151
Metadata
- Authors
- Vaidya, U. R., & Bhattacharya, M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1994-05-02
- Volume
- 52
- Issue
- 5
- Pages
- 617-628
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2032018099
- Cited by
- 124
- References
- 0
- FWCI
- 3.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.