The DOI matches its Crossref record.
Alcell® lignin solubility in ethanol–water mixtures
Abstract
The lignin solubility in aqueous solutions of different ethanol concentrations was studied. The concept of the solubility parameter was applied to account for the effect of ethanol concentration on the lignin solubility. Experimental results showed that the lignin solubility increased strongly as the ethanol concentration increased from 9.5 to 47.5% then, it increased much more slowly until a maximum was reached at an ethanol concentration of about 70%. Further increase in the ethanol concentration resulted in a slight decrease in the lignin solubility. Based on the lignin molecular formula, the solubility parameter (δ‐value) of the ALCELL® lignin was 13.7 (cal/cm 3)1/2. The δ‐value of aqueous ethanol solutions of increased ethanol concentration was calculated and was found to decrease continuously from 22.31 (cal/cm 3)1/2 for pure water to 12.08 (cal/cm 3)1/2 for pure ethanol. The effect of ethanol concentration on the solubility of the ALCELL lignin was then explained based on the theory that lignin exhibited the maximum solubility when the δ‐value of the solvent was close to that of the ALCELL lignin and the H‐bonding capacity of the solutions with different ethanol concentrations was similar. © 1995 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pan, X., Kadla, J. F., Ehara, K., Gilkes, N., & Saddler, J. N. (2006) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf0605392 · Cited by 680
Pan, X., Gilkes, N., Kadla, J., Pye, K., Saka, S., Gregg, D., Ehara, K., Xie, D., Lam, D., & Saddler, J. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20905 · Cited by 455
Polymer/lignin blends: Interactions, properties, applications
Kun, D., & Pukánszky, B. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.035 · Cited by 417
Turning renewable resources into value-added polymer: development of lignin-based thermoplastic
Saito, T., Brown, R. H., Hunt, M. A., Pickel, D. L., Pickel, J. M., Messman, J. M., Baker, F. S., Keller, M., & Naskar, A. K. (2012) · Green Chemistry · doi:10.1039/c2gc35933b · Cited by 395
Organosolv pretreatment of plant biomass for enhanced enzymatic saccharification
Zhang, Z., Harrison, M. D., Rackemann, D. W., Doherty, W. O. S., & O'Hara, I. M. (2016) · Green Chemistry · doi:10.1039/c5gc02034d · Cited by 395
Cheng, X.-C., Guo, X.-R., Qin, Z., Wang, X.-D., Liu, H.-M., & Liu, Y.-L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.08.249 · Cited by 71
Metadata
- Authors
- Ni, Y., & Hu, Q.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1995-09-19
- Volume
- 57
- Issue
- 12
- Pages
- 1441-1446
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2072519218
- Cited by
- 161
- References
- 0
- FWCI
- 1.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.