The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Wood‐fiber‐reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties
Abstract
This article presents the results of a study of the processing and physicomechanical properties of environmentally friendly wood‐fiber‐reinforced poly(lactic acid) composites that were produced with a microcompounding molding system. Wood‐fiber‐reinforced polypropylene composites were also processed under similar conditions and were compared to wood‐fiber‐reinforced poly(lactic acid) composites. The mechanical, thermomechanical, and morphological properties of these composites were studied. In terms of the mechanical properties, the wood‐fiber‐reinforced poly(lactic acid) composites were comparable to conventional polypropylene‐based thermoplastic composites. The mechanical properties of the wood‐fiber‐reinforced poly(lactic acid) composites were significantly higher than those of the virgin resin. The flexural modulus (8.9 GPa) of the wood‐fiber‐reinforced poly(lactic acid) composite (30 wt % fiber) was comparable to that of traditional (i.e., wood‐fiber‐reinforced polypropylene) composites (3.4 GPa). The incorporation of the wood fibers into poly(lactic acid) resulted in a considerable increase in the storage modulus (stiffness) of the resin. The addition of the maleated polypropylene coupling agent improved the mechanical properties of the composites. Microstructure studies using scanning electron microscopy indicated significant interfacial bonding between the matrix and the wood fibers. The specific performance evidenced by the wood‐fiber‐reinforced poly(lactic acid) composites may hint at potential applications in, for example, the automotive and packaging industries. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4856–4869, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Self-citationNatural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Dynamic Mechanical Analysis: A Practical Introduction
Menard, K. P. (1997) · Cited by 1,216
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Dynamic Mechanical Analysis: A Practical Introduction
Menard, K. (1999) · CRC Press eBooks · doi:10.1201/9781420049183 · Cited by 618
Maleated coupling agents for natural fibre composites
Keener, T. J., Stuart, R. K., & Brown, T. K. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.014 · Cited by 590
Contemporary Topics in Polymer Science: Volume 5
(1984) · Springer eBooks · doi:10.1007/978-1-4613-2759-2 · Cited by 514
Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites
Stark, N. M., & Rowlands, R. E. (2003) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 394
Surface modification and adhesion mechanisms in woodfiber-polypropylene composites
Kazayawoko, M., Balatinecz, J. J., & Matuana, L. M. (1999) · Journal of Materials Science · doi:10.1023/a:1004790409158 · Cited by 380
Cited by
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640
Cellulose reinforced polymer composites and nanocomposites: a critical review
Miao, C., & Hamad, W. Y. (2013) · Cellulose · doi:10.1007/s10570-013-0007-3 · Cited by 630
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Pei, A., Zhou, Q., & Berglund, L. A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.018 · Cited by 524
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Self-citationChallenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Wachirahuttapong, S., Thongpin, C., & Sombatsompop, N. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.05.026 · Cited by 136
Mechanical Property of Surface Modified Natural Fiber Reinforced PLA Biocomposites
Sujaritjun, W., Uawongsuwan, P., Pivsa-Art, W., & Hamada, H. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.798 · Cited by 94
Biodegradation of Phormium tenax/poly(lactic acid) composites
Fortunati, E., Puglia, D., Santulli, C., Sarasini, F., & Kenny, J. M. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36839 · Cited by 53
Characterization of tanalith E treated wood flour filled polylactic acid composites
Dalu, M., Temiz, A., Altuntaş, E., Demirel, G. K., & Aslan, M. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.03.037 · Cited by 30
Metadata
- Authors
- Huda, M. S., Drzal, L. T., Misra, M., & Mohanty, A. K.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-09-28
- Volume
- 102
- Issue
- 5
- Pages
- 4856-4869
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2116032797
- Cited by
- 346
- References
- 27
- FWCI
- 5.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.