The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Investigation on process parameters of electrospinning system through orthogonal experimental design
Abstract
Electrospinning is a very simple and versatile method of creating polymer‐based high‐functional and high‐performance nanofibers. But most of the investigations are not systematic and describe the electrospinning process without quantitative accuracy. Inconsistent and even opposite results have been reported, which has hindered the consistent interpretation of the experiments. Orthogonal experimental method was used to investigate qualitative and quantitative correlations between fiber characteristics (diameters and morphologies) and the processing and materials parameters. Uniform fibers can be obtained without any beads by proper selection of the processing parameters, and a lower glass transition temperature was observed for electrospun fibers than that of native polymer. Results of statistical analysis showed that significant influences were observed for polymer molecular weight and solution concentration on fiber diameters, and there were significant effects of polymer molecular weight, solution concentration, and solvent system on fiber morphologies. Meanwhile, solution concentration and polymer molecular weight, and polymer molecular weight and solvent system had obvious interaction effects. Regression analysis revealed quantitative relations of fiber diameters and beads percent, that is, Y1 = 72.8 X1 − 8.1 X2 + 138.8, Y2 = −3.2 X1 + 0.4 X2 + 60.5, where Y1 is fiber diameter (nm), Y2 beads percent (%), X1 solution concentration (%, w/w), and X2 polymer molecular weight (kDa). Validation test showed that the experimental values of fiber size and beads percent were in good agreement with the calculated ones. Based on these results, optimal conditions could be obtained for predetermined diameters and morphologies for electrospun fibers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3105–3112, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable nanoparticles for drug delivery and targeting
Hans, M. L., & Lowman, A. M. (2002) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(02)00117-1 · Cited by 1,324
Cited by
Bioinspired marine antifouling coatings: Status, prospects, and future
Jin, H., Tian, L., Bing, W., Zhao, J., & Ren, L. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100889 · Cited by 585
Electrospun nanofibrous materials for tissue engineering and drug delivery
Cui, W., Zhou, Y., & Chang, J. (2010) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/11/1/014108 · Cited by 492
Self-citationElectrospun Fibrous Mats with High Porosity as Potential Scaffolds for Skin Tissue Engineering
Zhu, X., Cui, W., Li, X., & Jin, Y. (2008) · Biomacromolecules · doi:10.1021/bm800476u · Cited by 383
Self-citationAn Orthogonal Array Optimization of Lipid-like Nanoparticles for mRNA Delivery in Vivo
Li, B., Luo, X., Deng, B., Wang, J., McComb, D. W., Shi, Y., Gaensler, K. M. L., Tan, X., Dunn, A. L., Kerlin, B. A., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03528 · Cited by 261
Islam, M. S., & Karim, M. R. (2010) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.05.038 · Cited by 259
Metadata
- Authors
- Cui, W., Li, X., Zhou, S., & Weng, J.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-12-12
- Volume
- 103
- Issue
- 5
- Pages
- 3105-3112
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2152500670
- Cited by
- 336
- References
- 1
- FWCI
- 3.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation on process parameters of electrospinning system through orthogonal experimental design. https://app.cochat.ai/papers/10.1002/app.25464
- The paper
- Cui, W., Li, X., Zhou, S., & Weng, J. (2007). Investigation on process parameters of electrospinning system through orthogonal experimental design. Journal of Applied Polymer Science. https://doi.org/10.1002/app.25464
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.