The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Injection‐molded short hemp fiber/glass fiber‐reinforced polypropylene hybrid composites—Mechanical, water absorption and thermal properties
Abstract
Natural fiber‐based thermoplastic composites are generally lower in strength performance compared to thermoset composites. However, they have the advantage of design flexibility and recycling possibilities. Hybridization with small amounts of synthetic fibers makes these natural fiber composites more suitable for technical applications such as automotive interior parts. Hemp fiber is one of the important lignocellulosic bast fiber and has been used as reinforcement for industrial applications. This study focused on the performance of injection‐molded short hemp fiber and hemp/glass fiber hybrid polypropylene composites. Results showed that hybridization with glass fiber enhanced the performance properties. A value of 101 MPa for flexural strength and 5.5 GPa for the flexural modulus is achieved from a hybrid composite containing 25 wt % of hemp and 15 wt % of glass. Notched Izod impact strength of the hybrid composites exhibited great enhancement (34%). Analysis of fiber length distribution in the composite and fracture surface was performed to study the fiber breakage and fracture mechanism. Thermal properties and resistance to water absorption properties of the hemp fiber composites were improved by hybridization with glass fibers. Overall studies indicated that the short hemp/glass fiber hybrid polypropylene composites are promising candidates for structural applications where high stiffness and thermal resistance is required. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2432–2441, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00084-8 · Cited by 873
Thwe, M. M., & Liao, K. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00071-9 · Cited by 619
Sreekala, M. S., George, J., Kumaran, M. G., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00219-6 · Cited by 482
Composites from Natural Fibers and Soy Oil Resins
Williams, G. I., & Wool, R. P. (2000) · Applied Composite Materials · doi:10.1023/a:1026583404899 · Cited by 335
Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.015 · Cited by 317
Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products
Sain, M., Suhara, P., Law, S., & Bouilloux, A. (2005) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684405041717 · Cited by 227
Self-citationUnidirectional hemp and flax EP‐ and PP‐composites: Influence of defined fiber treatments
Bledzki, A. K., Fink, H. ‐., & Specht, K. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20712 · Cited by 202
Mehta, G., Drzal, L. T., Mohanty, A. K., & Misra, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22620 · Cited by 150
High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene Composites
Li, H., & Sain, M. M. (2003) · Polymer-Plastics Technology and Engineering · doi:10.1081/ppt-120024999 · Cited by 122
Self-citation
Cited by
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Self-citationJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
Saba, N., Jawaid, M., Alothman, O. Y., & Paridah, M. T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.075 · Cited by 962
Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.12.004 · Cited by 771
Plant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764
Impact behaviour of hybrid composites for structural applications: A review
Safri, S. N. A., Sultan, M. T. H., Jawaid, M., & Jayakrishna, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.008 · Cited by 626
Mechanical properties of polypropylene composites: A review
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711428659 · Cited by 508
Recent advancement in the natural fiber polymer composites: A comprehensive review
Vigneshwaran, S., Sundarakannan, R., John, K. M., Joel Johnson, R. D., Prasath, K. A., Ajith, S., Arumugaprabu, V., & Uthayakumar, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124109 · Cited by 465
Review of the applications of biocomposites in the automotive industry
Akampumuza, O., Wambua, P. M., Ahmed, A., Li, W., & Qin, X. (2017) · Polymer Composites · doi:10.1002/pc.23847 · Cited by 420
Industrial Hemp Fibers: An Overview
Manaia, J. P., Manaia, A. T., & Rodriges, L. (2019) · Fibers · doi:10.3390/fib7120106 · Cited by 317
Durability of Basalt/Hemp Hybrid Thermoplastic Composites
Sergi, C., Tirillò, J., Seghini, M. C., Sarasini, F., Fiore, V., & Scalici, T. (2019) · Polymers · doi:10.3390/polym11040603 · Cited by 60
Metadata
- Authors
- Panthapulakkal, S., & Sain, M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-11-22
- Volume
- 103
- Issue
- 4
- Pages
- 2432-2441
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2153089809
- Cited by
- 408
- References
- 16
- FWCI
- 5.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.