The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Natural fibres: can they replace glass in fibre reinforced plastics?
Open accessAbstract
In this work, natural fibres (sisal, kenaf, hemp, jute and coir) reinforced polypropylene composites were processed by compression moulding using a film stacking method. The mechanical properties of the different natural fibre composites were tested and compared. A further comparison was made with the corresponding properties of glass mat reinforced polypropylene composites from the open literature. Kenaf, hemp and sisal composites showed comparable tensile strength and modulus results but in impact properties hemp appears to out-perform kenaf. The tensile modulus, impact strength and the ultimate tensile stress of kenaf reinforced polypropylene composites were found to increase with increasing fibre weight fraction. Coir fibre composites displayed the lowest mechanical properties, but their impact strength was higher than that of jute and kenaf composites. In most cases the specific properties of the natural fibre composites were found to compare favourably with those of glass.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Natural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
ABDELMOULEH, M., BOUFI, S., BELGACEM, M., & DUFRESNE, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.07.003 · Cited by 691
Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672
Thwe, M. M., & Liao, K. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00071-9 · Cited by 619
Experimental Characterization of Advanced Composite Materials
Carlsson, L. A., Adams, D. F., & Adams, D. F. (2002) · CRC Press eBooks · doi:10.1201/noe1587161001 · Cited by 576
Research works printed but not linked: 2
- Robbins, 1971, Textiles as reinforcements, Textile Institute and Industry, 9, 121
- Hinrichsen, 2000, Biofibres, biodegradable polymers and biocomposites:an overview, Macromolecular Materials and Engineering, 276/277, 1, 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W · doi:10.1002/(sici)1439-2054(20000301)276:1<1::aid-mame1>3.0.co;2-w
Cited by
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundWood–plastic composites as promising green-composites for automotive industries!
Ashori, A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.09.043 · Cited by 1,001
Bamboo fibre reinforced biocomposites: A review
Abdul Khalil, H. P. S., Bhat, I. U. H., Jawaid, M., Zaidon, A., Hermawan, D., & Hadi, Y. S. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.06.015 · Cited by 835
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Metadata
- Authors
- Wambua, P., Ivens, J., & Verpoest, I.
- Affiliations
- KU Leuven (BE)
- Corresponding author
- Wambua, Paul
- ORCID
- Ivens, Jan
- Venue
- Composites Science and Technology
- Publisher
- Elsevier BV
- Published
- 2003-07
- Volume
- 63
- Issue
- 9
- Pages
- 1259-1264
- ISSN
- 0266-3538 (ISSN-L)
- OpenAlex
- W2136281354
- Cited by
- 2,676
- References
- 69
- Citations by year
- 2026: 72 · 2025: 95 · 2024: 124 · 2023: 132 · 2022: 139 · 2021: 178 · 2020: 180 · 2019: 206 · 2018: 187 · 2017: 213 · 2016: 155 · 2015: 190 · 2014: 184 · 2013: 128 · 2012: 115
- FWCI
- 17.90
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Composites Science and Technology (publishedVersion)
- Unicam Scientific Publications (University of Camerino) (submittedVersion, cc-by)
- Lirias (submittedVersion)
- Funders
- University of Waikato
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Keywords
- natural fiber composites, polypropylene composites, sisal, kenaf, hemp, jute, coconut fiber, compression molding, film stacking, mechanical properties, tensile strength, impact strength, fiber weight fraction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Natural fibres: can they replace glass in fibre reinforced plastics? https://app.cochat.ai/papers/10.1016/s0266-3538(03)00096-4
- The paper
- Wambua, P., Ivens, J., & Verpoest, I. (2003). Natural fibres: can they replace glass in fibre reinforced plastics? Composites Science and Technology. https://doi.org/10.1016/s0266-3538(03)00096-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.