The DOI matches its Crossref record.
Thermogravimetric analysis of chitosan
Abstract
The thermal degradation of chitosan at different heating rates B in nitrogen was studied by thermogravimetric analysis. The results indicate that the thermal degradation of chitosan in nitrogen is a one‐step reaction. The degradation temperatures increase with B. Experimentally, the initial degradation temperature (T0) is (1.049 B + 326.8)°C; the temperature at the maximum degradation rate, that is, the peak temperature on a differential thermogravimetry curve (Tp), is (1.291 B + 355.2)°C; and the final degradation temperature (Tf) is (1.505 B + 369.7)°C. The degradation rates at Tp and Tf are not affected by B, and their average values are 50.17% and 72.16%, respectively, the maximum thermal degradation reaction rate, that is, the peak height on a differential thermogravimetry curve (Rp), increases with B. The relationship between B and Rp is Rp = (1.20 B + 2.44)% min−1. The thermal degradation kinetic parameters are calculated with the Ozawa–Flynn–Wall method. The reaction activation energy (E) and frequency factor (A) change with an increasing degree of decomposition, and the variable trends of the two kinetic parameters are similar. The values of E and A increase remarkably during the initial stage of the reaction, then keep relatively steady, and finally reach a peak during the last stage. The velocity constants of the thermal degradation vary with the degree of decomposition and increase with the reaction temperature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Biochar-supported zerovalent iron for removal of various contaminants from aqueous solutions
Zhou, Y., Gao, B., Zimmerman, A. R., Chen, H., Zhang, M., & Cao, X. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.11.021 · Cited by 421
Shen, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01228g · Cited by 263
Mincke, S., Asere, T. G., Verheye, I., Folens, K., Vanden Bussche, F., Lapeire, L., Verbeken, K., Van Der Voort, P., Tessema, D. A., Fufa, F., et al. (2019) · Green Chemistry · doi:10.1039/c9gc00166b · Cited by 138
Metadata
- Authors
- Hong, P., Li, S., Ou, C., Li, C., Yang, L., & Zhang, C.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2007-03-27
- Volume
- 105
- Issue
- 2
- Pages
- 547-551
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2015700195
- Cited by
- 159
- References
- 0
- FWCI
- 1.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermogravimetric analysis of chitosan. https://app.cochat.ai/papers/10.1002/app.25920
- The paper
- Hong, P., Li, S., Ou, C., Li, C., Yang, L., & Zhang, C. (2007). Thermogravimetric analysis of chitosan. Journal of Applied Polymer Science. https://doi.org/10.1002/app.25920
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.