The DOI matches its Crossref record.
A novel method for porosity measurement of various surface layers of nanofibers mat using image analysis for tissue engineering applications
Abstract
Research in polymer nanofibers has undergone significant progress in the last decade. One of the main driving force for this progress is the increasing use of these polymer nanofibers for tissue engineering. Adequate porosity and surface area are widely recognized as important parameters in the design of scaffolds for tissue engineering and therefore measurement of porosity is very important. Previous methods such as mercury measurement, indirect method, the porosity measurement based on density of nanofibers do not measure the porosity of various surface layers. The goal of this study is measurement of porosity of various surface layers of scaffold. Image analysis was used for this purpose. SEM images of nanofibers mat were converted to binary images using different thresholds and porosity of scaffold was measured in various layers. On the basis of the results of our study, this method can be applied to porosity measurement of various surface layers of nanofibers mat. The results showed that porosity of various surface layers is related to the number of layers of nanofibers mat. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Mozafari, M., Moztarzadeh, Jalali, Alhosseini, N., Asgari, Dodel, Samadikuchaksaraei, & Kargozar (2012) · International Journal of Nanomedicine · doi:10.2147/ijn.s25376 · Cited by 370
Asran, A. S., Henning, S., & Michler, G. H. (2010) · Polymer · doi:10.1016/j.polymer.2009.12.046 · Cited by 279
Asl, M. A., Karbasi, S., Beigi-Boroujeni, S., Zamanlui Benisi, S., & Saeed, M. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.078 · Cited by 94
Development of Filter Media by Electrospinning for Air Filtration of Nanoparticles from PET Bottles
Bonfim, D. P. F., Cruz, F. G. S., Guerra, V. G., & Aguiar, M. L. (2021) · Membranes · doi:10.3390/membranes11040293 · Cited by 60
“The porosity of the samples was determined by the Ergun equation [29] and the minimum and maximum pore size by ImageJ software through the analysis of electron microscopy images obtained from each sample as described in the literature [39].”
Method
Metadata
- Authors
- Ghasemi‐Mobarakeh, L., Semnani, D., & Morshed, M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2007-07-29
- Volume
- 106
- Issue
- 4
- Pages
- 2536-2542
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2143215401
- Cited by
- 238
- References
- 0
- FWCI
- 1.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.