The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
The water vapor sorption behavior of natural fibers
Abstract
The water vapor sorption behavior of a range of natural fibers (jute, flax, coir, cotton, hemp, Sitka spruce) has been studied. The data were analyzed using the Hailwood Horrobin model for isotherm fitting and determination of monolayer moisture content. The Hailwood Horrobin model was found to provide good fits to the experimental data. The extent of hysteresis exhibited between the adsorption and desorption isotherms was dependent on fiber type studied and was larger with high lignin compared with low lignin content fibers. The area bounded by the hysteresis loop decreased as the isotherms were performed at progressively higher temperatures. This behavior is consistent with sorption interactions occurring with a glassy solid below the glass transition temperature. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nimz, H. H. (1984) · Holz als Roh- und Werkstoff · doi:10.1007/bf02608943 · Cited by 2,761
Wood handbook: wood as an engineering material
Ross, R. J., & USDA Forest Service., F. P. L. (2010) · doi:10.2737/fpl-gtr-190 · Cited by 2,510
Siau, J. F. (1984) · Springer series in wood science · doi:10.1007/978-3-642-69213-0 · Cited by 1,190
Wood Modification: Chemical, Thermal and Other Processes
Hill, C. A. S. (2006) · Cited by 1,073
Self-citation(1992) · Choice Reviews Online · doi:10.5860/choice.30-0303 · Cited by 855
(2001) · Textile Research Journal · doi:10.1177/004051750107100818 · Cited by 537
Absorption of water by polymers: analysis in terms of a simple model
Hailwood, A. J., & Horrobin, S. (1946) · Transactions of the Faraday Society · doi:10.1039/tf946420b084 · Cited by 470
Effects of environmental conditions on mechanical and physical properties of flax fibers
Stamboulis, A. G., Baillie, C. A., & Peijs, T. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00032-x · Cited by 463
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
(2006) · Digital Access to Libraries (Université catholique de Louvain (UCL), l'Université de Namur (UNamur) and the Université Saint-Louis (USL-B)) · doi:10.1007/1-4020-4393-7 · Cited by 418
Cited by
Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment
Etale, A., Onyianta, A. J., Turner, S. R., & Eichhorn, S. J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00477 · Cited by 817
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Strong, Ductile, and Waterproof Cellulose Nanofibril Composite Films with Colloidal Lignin Particles
Farooq, M., Zou, T., Riviere, G., Sipponen, M. H., & Österberg, M. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.8b01364 · Cited by 337
Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S. (2021) · Polymer Composites · doi:10.1002/pc.26312 · Cited by 281
A review of 3D and 4D printing of natural fibre biocomposites
Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108911 · Cited by 280
Analysis of the spontaneous combustion and self-heating of almond shells
Font, R. (2020) · Fuel · doi:10.1016/j.fuel.2020.118504 · Cited by 14
Metadata
- Authors
- Hill, C. A. S., Norton, A., & Newman, G.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2009-02-05
- Volume
- 112
- Issue
- 3
- Pages
- 1524-1537
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1982539892
- Cited by
- 467
- References
- 28
- FWCI
- 9.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.