The DOI matches its Crossref record; 137 of the 137 references it cites were found in a registry or an index.
A review of 3D and 4D printing of natural fibre biocomposites
Open accessAbstract
To date, the literature has focused on synthetic fibre-reinforced composites, but it has not adequately addressed the unique properties that differentiate natural from synthetic fibres, such as their natural variation in microstructure and composition across species. This review paper proposes a critical overview of the current state of 3D printing of natural fibre-reinforced composites or biocomposites for mechanical purposes, as well as an overview of their role in 4D printing for stimuli-responsive applications. The paper is structured as follows: after the first part recalling the specificities of natural fibres and their associated composites, the two main sections are each divided into two parts presenting an analysis of the available data to provide fundamental understandings and a discussion and outlook for the future. Natural discontinuous fibre-reinforced polymers exhibit moderate mechanical properties compared to composites manufactured by conventional processes due to specific factors of the 3D printing process, such as high porosity, low fibre content, and a very low fibre-aspect ratio (L/d). Hygromorph BioComposites (HBC) are categorized into a new class of smart materials that could be used for 4D printing of shape-changing mechanisms. Fibre content, fibre orientation control, and fibre continuity are outlined in relation to known challenges in actuation performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum
Kelly, A., & Tyson, W. R. (1965) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(65)90035-9 · Cited by 2,479
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Cited by
Poly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
PLA based biocomposites for sustainable products: A review
Trivedi, A. K., Gupta, M. K., & Singh, H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.02.002 · Cited by 337
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
Aisyah, H. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Khalina, A., Nurazzi, N. M., Lee, S. H., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13030471 · Cited by 263
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Metadata
- Authors
- Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 194
- Pages
- 108911
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W3037712079
- Cited by
- 280
- References
- 137
- FWCI
- 14.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of 3D and 4D printing of natural fibre biocomposites. https://app.cochat.ai/papers/10.1016/j.matdes.2020.108911
- The paper
- Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020). A review of 3D and 4D printing of natural fibre biocomposites. Materials & Design. https://doi.org/10.1016/j.matdes.2020.108911
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.