Mechanisms of plastic deformation in biodegradable polylactide/poly(1,4‐cis‐isoprene) blends
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Polylactide (PLA), a main representative of biodegradable and made from renewable resources polymers, is surprisingly brittle at ambient temperature. In this article it is investigated how to increase its toughness by a strategy called “rubber toughening” using poly(1,4‐cis‐isoprene), a major component of natural rubber, which is immiscible with PLA, could be well dispersed in PLA matrix and is biodegradable. Immiscible blends of PLA with poly(1,4‐cis‐isoprene) were prepared by melt blending and their properties were studied and optimized. Incorporation of as low as 5 wt % of rubber increased the strain at break of compression molded film during uniaxial drawing, and also improved its tensile impact strength by 80%. The complex mechanism of plastic deformation in the blends leading to improvement of ductility and toughness was revealed. The rubbery particles initiated crazing at the early stages of deformation, as evidenced by transmission and scanning electron microscopy and also by small angle X‐ray scattering. Crazing was immediately followed by cavitation inside rubber particles, which further promoted shear yielding of PLA. The sequence of those mechanisms was proven by microscopic investigation. All three elementary mechanisms acting in the sequence indicated are responsible for surprisingly efficient toughening of PLA by a major component of natural rubber. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Plasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 374
Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Lee, I., Panthani, T. R., & Bates, F. S. (2013) · Macromolecules · doi:10.1021/ma401508b · Cited by 117
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Metadata
- Authors
- Kowalczyk, M., & Piorkowska, E.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2011-12-05
- Volume
- 124
- Issue
- 6
- Pages
- 4579-4589
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2050203365
- Cited by
- 61
- References
- 4
- FWCI
- 2.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanisms of plastic deformation in biodegradable polylactide/poly(1,4‐cis‐isoprene) blends. https://app.cochat.ai/papers/10.1002/app.35489
- The paper
- Kowalczyk, M., & Piorkowska, E. (2012). Mechanisms of plastic deformation in biodegradable polylactide/poly(1,4‐cis‐isoprene) blends. Journal of Applied Polymer Science. https://doi.org/10.1002/app.35489
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.