CoChat

Effects of talc on the mechanical and thermal properties of polylactide

Yu, Fengmei, Liu, Tao, Zhao, Xiuli, Yu, Xuejiang, Lu, Ai, Wang, Jianhua · 2012 · Journal of Applied Polymer Science
Cited by 148

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Polylactide (PLA) composites with various talc content were prepared by melt extrusion. The thermal, dynamic mechanical, tensile and flexural properties, and fracture surface morphologies of neat PLA and PLA/talc composites were investigated and compared. The results showed that talc had significant nucleation effect and the cold crystallization temperature of PLA decreased with talc concentration. The thermal degradation and heat distortion temperature of PLA were slightly enhanced by compounding with talc. Talc showed significant reinforcing and toughening effects on PLA, the tensile strength, flexural strength and modulus increased with talc content ranging from 0 to 24.3 wt %. The results of tensile test showed that the elongation at break increased with talc content up to 18.1 wt % with obvious changes in fracture behavior, changing from brittle to ductile, when talc content increased to 24.3%, samples failed in a brittle manner with low elongation at break. The fracture surface morphologies showed that the talc layers were partially delaminated, aligned along the flow direction, and uniformly dispersed in the PLA matrix. The results obtained by SEM and FTIR confirmed that the interfacial adhesion between talc and PLA matrix was good. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/app.36260

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Cited by

See all 148

Metadata

Authors
Yu, F., Liu, T., Zhao, X., Yu, X., Lu, A., & Wang, J.
Venue
Journal of Applied Polymer Science
Publisher
Wiley
Published
2012-02-20
Volume
125
Issue
S2
ISSN
  • 0021-8995 (ISSN-L)
  • 1097-4628
OpenAlex
W2040365187
Cited by
148
References
7
FWCI
3.73
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Effects of talc on the mechanical and thermal properties of polylactide. https://app.cochat.ai/papers/10.1002/app.36260
The paper
Yu, F., Liu, T., Zhao, X., Yu, X., Lu, A., & Wang, J. (2012). Effects of talc on the mechanical and thermal properties of polylactide. Journal of Applied Polymer Science. https://doi.org/10.1002/app.36260

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.