Effect of the molecular structure of semicrystalline polyethylene on mechanical properties studied by molecular dynamics
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
We present results from molecular dynamics simulations for an all‐atoms model of a semicrystalline polyethylene under uniaxial tensile test. Our model has a realistic semicrystalline organization of two high molecular chains which are involved in two crystalline and two amorphous phases. The tie‐molecules link these phases. A high content of tie‐molecules is compatible with the stability of the semicrystalline organizations in the initial state. The main objective of the study is to check the effect of some molecular parameters, poorly known from experiments, on the mechanical properties under uniaxial tensile test. It is a way to have an insight on the value of the probable molecular parameters. We show that the number of tie‐molecules mainly acts on the elastic modulus and the lamellar thickness acts on the yield stress. A nearly constant stress, a plateau, results from the narrow length‐distribution of tie‐molecules. This plateau is not observed during mechanical experiments. This plateau is the direct result of isomolecular tie‐molecules. The only way to predict the progressive increase of the stress up to the yields stress observed experimentally is to consider a large length‐distribution of tie‐molecules. This progressive increase of stress implies a progressive deformation of the crystalline phase. The basic mechanism of plastic deformation is the pull‐out of crystalline chain segments by the tie‐molecules in extended conformation. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Glass Temperature of Linear Polyethylene
Stehling, F. C., & Mandelkern, L. (1970) · Macromolecules · doi:10.1021/ma60014a023 · Cited by 278
Lavine, M. S., Waheed, N., & Rutledge, G. C. (2003) · Polymer · doi:10.1016/s0032-3861(03)00017-x · Cited by 219
Simulation of large-strain plastic-deformation and texture evolution in high-density polyethylene
Lee, B. J., Argon, A. S., Parks, D. M., Ahzi, S., & Bartczak, Z. (1993) · Polymer · doi:10.1016/0032-3861(93)90039-d · Cited by 183
Cited by
Yeh, I.-C., Andzelm, J. W., & Rutledge, G. C. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00697 · Cited by 146
Yeh, I.-C., Lenhart, J. L., Rutledge, G. C., & Andzelm, J. W. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b01748 · Cited by 84
Olsson, P. A. T., in ’t Veld, P. J., Andreasson, E., Bergvall, E., Persson Jutemar, E., Petersson, V., Rutledge, G. C., & Kroon, M. (2018) · Polymer · doi:10.1016/j.polymer.2018.07.075 · Cited by 52
Crystallization of finite-extensible nonlinear elastic Lennard-Jones coarse-grained polymers
Morthomas, J., Fusco, C., Zhai, Z., Lame, O., & Perez, M. (2017) · Physical Review E · doi:10.1103/physreve.96.052502 · Cited by 41
Metadata
- Authors
- Queyroy, S., & Monasse, B.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2012-03
- Volume
- 125
- Issue
- 6
- Pages
- 4358-4367
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2008308773
- Cited by
- 26
- References
- 3
- FWCI
- 1.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.