Improvement in toughness and heat resistance of poly(lactic acid)/polycarbonate blend through twin‐screw blending: Influence of compatibilizer type
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The thermal mechanical properties and morphological changes of modified poly(lactic acid) (PLA) and polycarbonate (PC) polymer blends based on the equal weight fraction of each component were investigated. Several blend samples were prepared by melt processing with a twin screw extruder using both poly(butylene succinate‐co‐lactate) (PBSL) and epoxy (EP) as compatibilizers for the PLA/PC binary system. Differential scanning calorimetry (DSC) of PLA/PBSL and PC/PBSL binary blends showed that individual components were immiscible. Scanning electron microscopy (SEM) analysis of these blends revealed the domain size of PBSL was ∼ 0.5–1 μm in PLA/PBSL blend, and reduced to around 0.1 μm in PC/PBSL blend. The notched Izod impact strength (IS) of PLA/PC/PBSL ternary blends increased with PBSL content up to 10 phr PBSL due to enhanced interfacial interaction and proper domain size of the dispersed phase on the basis of DMA, DSC, and SEM analysis. The heat deflection temperature (HDT) showed a maximum at 5 phr PBSL, and it dropped with increasing PBSL content which is a ductile polymer. However, the HDT of PLA/PC/EP ternary blends increased considerably with 10 phr EP due to rigid interphase formation, and it increased further with 1 phr quaternary amine catalyst, however, the IS dropped nearly the same as that of unmodified PLA/PC blend. To take advantage of the two compatibilizers, PBSL and EP were added to the PLA/PC blend at 10 phr each plus 1 phr catalyst and both IS and HDT were improved significantly over unmodified PLA/PC pair. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Biodegradable Poly(Lactic Acid): Synthesis, Modification, Processing and Applications
Ren, J. (2010) · doi:10.1007/978-3-642-17596-1 · Cited by 190
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Compatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Metadata
- Authors
- Wang, Y., Chiao, S. M., Hung, T. ‐., & Yang, S. ‐.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2012-04-11
- Volume
- 125
- Issue
- S2
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2076499431
- Cited by
- 88
- References
- 6
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improvement in toughness and heat resistance of poly(lactic acid)/polycarbonate blend through twin‐screw blending: Influence of compatibilizer type. https://app.cochat.ai/papers/10.1002/app.36920
- The paper
- Wang, Y., Chiao, S. M., Hung, T. ‐., & Yang, S. ‐. (2012). Improvement in toughness and heat resistance of poly(lactic acid)/polycarbonate blend through twin‐screw blending: Influence of compatibilizer type. Journal of Applied Polymer Science. https://doi.org/10.1002/app.36920
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.