Batch and column adsorption of perfluorooctane sulfonate on anion exchange resins and granular activated carbon
The DOI matches its Crossref record.
Abstract
Perfluorooctane sulfonate (PFOS) has been detected widely in the natural water matrix and is persistent, bioaccumulative, and toxic. To prevent the adverse effects of PFOS contamination on human health and the environment, effective removal techniques are needed. Adsorption is considered an effective technique for PFOS removal. In this study, five anion exchange resins and granular activated carbon (GAC) were examined to evaluate their performance for the removal of PFOS in both batch and column experiments. Experimental adsorption data for all of the adsorbents exhibited a high correlation with the Freundlich isotherm (R 2 = 0.95 – 0.98). Most of the anion exchange resins demonstrated a higher adsorption capacity than the GAC. PFA300 had the highest adsorption capacity (455 mg/g). Continuous adsorption of PFOS was performed in column experiments using the same adsorbents that had been used in the batch experiments. The experimental breakthrough curves were set at C/C0 = 0.1. PFA300 showed the longest operation time before reaching the breakthrough point. The Yoon and Nelson model was used to predict the half‐saturation time of the anion exchange resins. Moreover, the anion exchange resins exhibited high recovery of PFOS by an organic solvent. Continuous PFOS adsorption on a column can be achieved using anion exchange resins for water/wastewater treatment. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39782.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li, F., Duan, J., Tian, S., Ji, H., Zhu, Y., Wei, Z., & Zhao, D. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122506 · Cited by 707
The overlooked short- and ultrashort-chain poly- and perfluorinated substances: A review
Ateia, M., Maroli, A., Tharayil, N., & Karanfil, T. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2018.12.186 · Cited by 639
Crone, B. C., Speth, T. F., Wahman, D. G., Smith, S. J., Abulikemu, G., Kleiner, E. J., & Pressman, J. G. (2019) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2019.1614848 · Cited by 408
Maimaiti, A., Deng, S., Meng, P., Wang, W., Wang, B., Huang, J., Wang, Y., & Yu, G. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.006 · Cited by 307
Cantoni, B., Turolla, A., Wellmitz, J., Ruhl, A. S., & Antonelli, M. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.148821 · Cited by 264
Boyer, T. H., Fang, Y., Ellis, A., Dietz, R., Choi, Y. J., Schaefer, C. E., Higgins, C. P., & Strathmann, T. J. (2021) · Water Research · doi:10.1016/j.watres.2021.117244 · Cited by 274
Arias Espana, V. A., Mallavarapu, M., & Naidu, R. (2015) · Environmental Technology & Innovation · doi:10.1016/j.eti.2015.06.001 · Cited by 256
Zhang, Y., Thomas, A., Apul, O., & Venkatesan, A. K. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132378 · Cited by 178
Franke, V., Ullberg, M., McCleaf, P., Wålinder, M., Köhler, S. J., & Ahrens, L. (2021) · ACS ES&T Water · doi:10.1021/acsestwater.0c00141 · Cited by 154
Karoyo, A., & Wilson, L. (2015) · Nanomaterials · doi:10.3390/nano5020981 · Cited by 68
“documented with several recent reports [46–55].”
Metadata
- Authors
- Chularueangaksorn, P., Tanaka, S., Fujii, S., & Kunacheva, C.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2013-09-09
- Volume
- 131
- Issue
- 3
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1965243046
- Cited by
- 47
- References
- 0
- FWCI
- 1.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.