The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Sustainable biodegradable coffee grounds filler and its effect on the hydrophobicity, mechanical and thermal properties of biodegradable PBAT composites
Abstract
Poly(butylene adipate‐co‐terephthalate) (PBAT) and coffee grounds (CG) wastes are biodegradable materials. The high cost of PBAT restricts its marketability; the lignocellulosic CG were used as a reinforcing agent for PBAT. Thus, the present work focuses mainly on the preparation and characterization of bio‐based PBAT composites filled with CG bio‐additives with affordable cost, and with potential use in a variety of eco‐friendly fields such as packaging, biomedical devices, and composting. The PBAT polymer was melt blended with various contents of CG powder using twin screw extrusion. The compatibility and dispersion state of investigated biocomposites in presence or absence of PEG as plasticizer were investigated by using scanning electron microscopy (SEM) and X‐ray diffraction (XRD). The effect of the addition of PEG on PBAT/CG was characterized by differential scanning calorimetry (DSC), tensile properties, contact angle measurements, and thermogravimetric analysis. The chemical interaction between hydroxyl groups of CG particles and PEG plasticizer was achieved by these techniques. A pyrolysis kinetic model was proposed to identify the kinetic parameters of the thermal degradation of PBAT and CG powder. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44498.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Van Zwieten, L., Kimber, S., Morris, S., Chan, K. Y., Downie, A., Rust, J., Joseph, S., & Cowie, A. (2010) · Plant and Soil · doi:10.1007/s11104-009-0050-x · Cited by 1,916
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Cellulose nanocrystals reinforced poly(oxyethylene)
Azizi Samir, M. A. S., Alloin, F., Sanchez, J.-Y., & Dufresne, A. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.094 · Cited by 398
Self-citationPillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366
The chemical composition of exhausted coffee waste
Pujol, D., Liu, C., Gominho, J., Olivella, M. À., Fiol, N., Villaescusa, I., & Pereira, H. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.07.056 · Cited by 342
Cited by
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
A Review of Biodegradable Plastics: Chemistry, Applications, Properties, and Future Research Needs
Kim, M. S., Chang, H., Zheng, L., Yan, Q., Pfleger, B. F., Klier, J., Nelson, K., Majumder, E. L.-W., & Huber, G. W. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00876 · Cited by 542
Ferreira, F. V., Cividanes, L. S., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering & Science · doi:10.1002/pen.24770 · Cited by 443
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
Self-citationValorization of spent coffee grounds: A review
Kovalcik, A., Obruca, S., & Marova, I. (2018) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2018.05.002 · Cited by 277
The preparation and performance of poly(butylene adipate) terephthalate/corn stalk composites
Tsou, C.-H., Chen, Z.-J., Yuan, S., Ma, Z.-L., Wu, C.-S., Yang, T., Jia, C.-F., & Reyes De Guzman, M. (2022) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2022.100329 · Cited by 55
Gallo‐García, L. A., Peron‐Schlosser, B., Carpiné, D., de Oliveira, R. M., Simões, B. M., Dias, A. P., Yamashita, F., & Spier, M. R. (2022) · Journal of Food Process Engineering · doi:10.1111/jfpe.14181 · Cited by 12
Metadata
- Authors
- Moustafa, H., Guizani, C., & Dufresne, A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2016-10-08
- Volume
- 134
- Issue
- 8
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2528908918
- Cited by
- 161
- References
- 9
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.