The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
The search for enhanced dielectric strength of polymer‐based dielectrics: A focused review on polymer nanocomposites
Abstract
This report traces the leading scientific endeavors to enhance the dielectric strength of polymer dielectrics for energy storage and electrical insulation applications. Remarkable progress has occurred over the past 15 years through nanodielectric engineering involving inorganic nanofillers, coatings, and polymer matrices. This article highlights the challenges of dielectric polymers primarily toward capacitors and cable/wire insulation. It also summarizes several major technical approaches to enhance the dielectric strength of polymers and nanocomposites, including nanoparticle incorporation in polymers, filler‐polymer interface engineering, and film surface coating. More attention is directed to interface contributions, including rational design of core‐shell structures, use of low‐dimensional fillers and thermally conducting fillers, and inorganic surface coating of polymer films. These efforts demonstrated the enhancement in dielectric strength by 40–160% when controlling the fillers below 5 wt% in polyvinylidenedifluoride (PVDF) composites. This article also discussed the possible dielectric mechanisms and the positive role of interfaces against charge transport traps for attaining higher breakdown strength. The investigation of low‐dimensional filler/coating materials of high thermal conductivity can be key scientific subjects for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
A Review on Conduction Mechanisms in Dielectric Films
Chiu, F.-C. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/578168 · Cited by 1,574
Cited by
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Dielectric polymers for high-temperature capacitive energy storage
Li, H., Zhou, Y., Liu, Y., Li, L., Liu, Y., & Wang, Q. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00765j · Cited by 713
Metadata
- Authors
- Tan, D. Q.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2020-05-21
- Volume
- 137
- Issue
- 33
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W3026546349
- Cited by
- 262
- References
- 2
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.