The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Biomass pyrolysis: a state‐of‐the‐art review
Abstract
Biomass pyrolysis is a process by which a biomass feedstock is thermally degraded in the absence of air/oxygen. It is used for the production of solid (charcoal), liquid (tar and other organics) and gaseous products. These products are of interest as they are possible alternate sources of energy. The study of pyrolysis is gaining increasing importance, as it is not only an independent process, it is also a . rst step in the gasi. cation or combustion process, and has many advantages over other renewable and conventional energy sources. Studies have been conducted on pyrolysis of biomass and other substances by several researchers. The actual reaction scheme of pyrolysis of biomass is extremely complex because of the formation of over a hundred intermediate products. Mode ling of pyrolysis includes chemical kinetics model, heat transfer model and mass transfer model. Various kinetic models, heat and mass transfer models reported in the literature and our previous study are reported in the present review with experimental validations to provide the current status of the study. Plasma pyrolysis provides high temperature and high energy for reaction as the reaction sample is rapidly heated up to a high temperature. This review also covers the experimental and modeling study status of plasma‐assisted pyrolysis. © 2008 Society of Chemical Industry and John Wiley & Sons, Ltd
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic modeling of biomass pyrolysis
Várhegyi, G., Antal, M. J., Jakab, E., & Szabó, P. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00971-0 · Cited by 545
Drying and Pyrolysis of Wood Particles: Experiments and Simulation
Peters, B., & Bruch, C. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00134-1 · Cited by 136
Flash pyrolysis of agricultural residues using a plasma heated laminar entrained flow reactor
Shuangning, X., Weiming, Y., & Li, B. (2005) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2005.03.002 · Cited by 52
Cited by
Microalgae for biodiesel production and other applications: A review
Mata, T. M., Martins, A. A., & Caetano, N. S. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.020 · Cited by 5,685
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Biodiesel from microalgae: A critical evaluation from laboratory to large scale production
Rawat, I., Ranjith Kumar, R., Mutanda, T., & Bux, F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.10.004 · Cited by 977
A review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
Exploring the potential of microalgae for new biotechnology applications and beyond: a review
Rizwan, M., Mujtaba, G., Memon, S. A., Lee, K., & Rashid, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.034 · Cited by 578
Production, activation, and applications of biochar in recent times
Sakhiya, A. K., Anand, A., & Kaushal, P. (2020) · Biochar · doi:10.1007/s42773-020-00047-1 · Cited by 497
Escalante, J., Chen, W.-H., Tabatabaei, M., Hoang, A. T., Kwon, E. E., Andrew Lin, K.-Y., & Saravanakumar, A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112914 · Cited by 414
Ghodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Co-gasification and recent developments on waste-to-energy conversion: A review
Ramos, A., Monteiro, E., Silva, V., & Rouboa, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.025 · Cited by 367
Kebelmann, K., Hornung, A., Karsten, U., & Griffiths, G. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.006 · Cited by 317
Wijitkosum, S., & Jiwnok, P. (2019) · Applied Sciences · doi:10.3390/app9193980 · Cited by 167
“During pyrolysis, hemicelluloses decompose first at temperatures ranging from 200 to 260 ◦C; cellulose breakdown begins at 240–350 ◦C, and decomposition of lignin begins from 280–500 ◦C [93].”
BackgroundXiong, Q., Kong, S.-C., & Passalacqua, A. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.06.017 · Cited by 142
Modeling effects of interphase transport coefficients on biomass pyrolysis in fluidized beds
Xiong, Q., & Kong, S.-C. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.062 · Cited by 81
Metadata
- Authors
- Babu, B. V.
- Venue
- Biofuels, Bioproducts and Biorefining
- Publisher
- Wiley
- Published
- 2008-08-04
- Volume
- 2
- Issue
- 5
- Pages
- 393-414
- ISSN
- 1932-1031 (ISSN-L)
- 1932-104X
- OpenAlex
- W2166363382
- Cited by
- 356
- References
- 3
- FWCI
- 6.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
