The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Impact of nano‐topography on bacterial attachment
Abstract
The adhesion of bacteria to surfaces is an important biological process, but one that has resisted simple categorization due to the number and complexity of parameters involved. The roughness of the substrate is known to play a significant role in the attachment process, particularly when the surface irregularities are comparable to the size of the bacteria and can provide shelter from unfavorable environmental factors. According to this scenario, roughness on a scale much smaller than the bacteria would not be expected to influence the initial attachment. To test this hypothesis, the impact of nanometer‐scale roughness on bacterial attachment has been investigated using as‐received and chemically etched glass surfaces. The surface modification by etching resulted in a 70% reduction in the nanoscale roughness of the glass surface with no significant alteration of its chemical composition or charge. Nevertheless, the number of bacteria adhering to the etched surface was observed to increase by a factor of three. The increase in attachment was also associated with an alteration in cellular metabolic activity as demonstrated by changes in characteristic cell morphologies and increased production of extracellular polymeric substances. The results indicate that bacteria may be more sensitive to nanoscale surface roughness than was previously believed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Influence of Substratum Characteristics on the Attachment of a Marine Pseudomonad to Solid Surfaces
Fletcher, M., & Loeb, G. I. (1979) · Applied and Environmental Microbiology · doi:10.1128/aem.37.1.67-72.1979 · Cited by 587
Effect of Molecular Scale Roughness of Glass Beads on Colloidal and Bacterial Deposition
Shellenberger, K., & Logan, B. E. (2002) · Environmental Science & Technology · doi:10.1021/es015515k · Cited by 261
A reference guide to microbial cell surface hydrophobicity based on contact angles
van der Mei, H. C., Bos, R., & Busscher, H. J. (1998) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/s0927-7765(98)00037-x · Cited by 253
Role of nonadsorbing polymers in bacterial aggregation
Eboigbodin, K. E., Newton, J. R. A., Routh, A. F., & Biggs, C. A. (2005) · Langmuir · doi:10.1021/la051740u · Cited by 62
Cited by
Ribeiro, M., Monteiro, F. J., & Ferraz, M. P. (2012) · Biomatter · doi:10.4161/biom.22905 · Cited by 824
Abrigo, M., McArthur, S. L., & Kingshott, P. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201300561 · Cited by 622
Surface characteristics of dental implants: A review
Rupp, F., Liang, L., Geis-Gerstorfer, J., Scheideler, L., & Hüttig, F. (2018) · Dental Materials · doi:10.1016/j.dental.2017.09.007 · Cited by 585
Wan, Z., Lei, D., Yang, W., Liu, C., Shi, K., Hao, X., Shen, L., Lv, W., Li, B., Yang, Q., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805301 · Cited by 556
Bacterial Retention on Superhydrophobic Titanium Surfaces Fabricated by Femtosecond Laser Ablation
Fadeeva, E., Truong, V. K., Stiesch, M., Chichkov, B. N., Crawford, R. J., Wang, J., & Ivanova, E. P. (2011) · Langmuir · doi:10.1021/la104607g · Cited by 440
Self-citationThe influence of nano-scale surface roughness on bacterial adhesion to ultrafine-grained titanium
Truong, V. K., Lapovok, R., Estrin, Y. S., Rundell, S., Wang, J. Y., Fluke, C. J., Crawford, R. J., & Ivanova, E. P. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.071 · Cited by 438
Self-citationSurface topographical factors influencing bacterial attachment
Crawford, R. J., Webb, H. K., Truong, V. K., Hasan, J., & Ivanova, E. P. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2012.06.015 · Cited by 384
Self-citationNano-structured antimicrobial surfaces: From nature to synthetic analogues
Elbourne, A., Crawford, R. J., & Ivanova, E. P. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.021 · Cited by 365
Self-citationAntibacterial Surface Treatment for Orthopaedic Implants
Gallo, J., Holinka, M., & Moucha, C. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150813849 · Cited by 344
Bacterial anti-adhesion surface design: Surface patterning, roughness and wettability: A review
Yang, K., Shi, J., Wang, L., Chen, Y., Liang, C., Yang, L., & Wang, L.-N. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.05.028 · Cited by 330
Engineering electrodes for microbial electrocatalysis
Guo, K., Prévoteau, A., Patil, S. A., & Rabaey, K. (2015) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2015.02.014 · Cited by 313
Plasma-assisted surface modification of organic biopolymers to prevent bacterial attachment
Bazaka, K., Jacob, M. V., Crawford, R. J., & Ivanova, E. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.024 · Cited by 296
Self-citationHydrodynamics and surface properties influence biofilm proliferation
Krsmanovic, M., Biswas, D., Ali, H., Kumar, A., Ghosh, R., & Dickerson, A. K. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102336 · Cited by 285
Mitik-Dineva, N., Wang, J., Truong, V. K., Stoddart, P., Malherbe, F., Crawford, R. J., & Ivanova, E. P. (2009) · Current Microbiology · doi:10.1007/s00284-008-9320-8 · Cited by 283
Self-citationCells preferentially grow on rough substrates
Gentile, F., Tirinato, L., Battista, E., Causa, F., Liberale, C., di Fabrizio, E. M., & Decuzzi, P. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.016 · Cited by 276
Metadata
- Authors
- Mitik‐Dineva, N., Wang, J., Mocanasu, R. C., Stoddart, P. R., Crawford, R. J., & Ivanova, E. P.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2008-04
- Volume
- 3
- Issue
- 4
- Pages
- 536-544
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W2064706764
- Cited by
- 186
- References
- 4
- FWCI
- 4.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.