Recommendations for Comparison of Productivity Between Fed‐Batch and Perfusion Processes
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Due to the growing interest in integrated continuous processing in the biopharmaceutical industry, productivity comparison of batch‐based and continuous processes is considered a challenge. Integrated continuous manufacturing of biopharmaceuticals requires scientists and engineers to collaborate effectively. Differing definitions, for example, of volumetric productivity, may cause confusion in this interdisciplinary field. Therefore, the aim of this communication is to reiterate the standard definitions and their underlying assumptions. Applying them to an exemplary model scenario allows to demonstrate the differences and to develop recommendations for the comparison of productivity of different upstream processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“In contrast, cell specific perfusion rate (CSPR), commonly expressed in nanoliters per cell per day (nL cell -1 per day), is normalized to the viable cell density in the vessel.[2,10]”
From Biomass specific perfusion rate as a control lever for the continuous manufacturing of biosimilar monoclonal antibodies from CHO cell cultures (2024) · cites this paper as [2]
The cited source says what the claim attributes to it.
In the citing paper
“One of the critical process parameters is the culture media perfusion rate.[2]”
From Biomass specific perfusion rate as a control lever for the continuous manufacturing of biosimilar monoclonal antibodies from CHO cell cultures (2024) · cites this paper as [2]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cell Culture Technology for Pharmaceutical and Cell-Based Therapies
(2005) · CRC Press eBooks · doi:10.1201/9780849351068 · Cited by 291
Perfusion mammalian cell culture for recombinant protein manufacturing – A critical review
Bielser, J.-M., Wolf, M., Souquet, J., Broly, H., & Morbidelli, M. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.04.011 · Cited by 263
Trummer, E., Fauland, K., Seidinger, S., Schriebl, K., Lattenmayer, C., Kunert, R., Vorauer‐Uhl, K., Weik, R., Borth, N., Katinger, H., et al. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.21013 · Cited by 216
Engineering challenges in high density cell culture systems
Ozturk, S. S. (1996) · Cytotechnology · doi:10.1007/bf00353919 · Cited by 200
Process performance and product quality in an integrated continuous antibody production process
Karst, D. J., Steinebach, F., Soos, M., & Morbidelli, M. (2017) · Biotechnology and Bioengineering · doi:10.1002/bit.26069 · Cited by 141
Design and operation of a continuous integrated monoclonal antibody production process
Steinebach, F., Ulmer, N., Wolf, M., Decker, L., Schneider, V., Wälchli, R., Karst, D., Souquet, J., & Morbidelli, M. (2017) · Biotechnology Progress · doi:10.1002/btpr.2522 · Cited by 128
Yang, W. C., Minkler, D. F., Kshirsagar, R., Ryll, T., & Huang, Y. (2015) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2015.10.009 · Cited by 118
Trummer, E., Fauland, K., Seidinger, S., Schriebl, K., Lattenmayer, C., Kunert, R., Vorauer‐Uhl, K., Weik, R., Borth, N., Katinger, H., et al. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20958 · Cited by 77
Application of Stoichiometric and Kinetic Analyses to Characterize Cell Growth and Product Formation
Adams, D., Korke, R., & Hu, W. (2007) · Methods in biotechnology · doi:10.1007/978-1-59745-399-8_12 · Cited by 27
Ōmasa, T., & Suga, K. (2006) · Advances in biochemical engineering, biotechnology · doi:10.1007/11751571 · Cited by 17
Research works printed but not linked: 1
- Exemplary model scenario of Fed-Batch and Perfusion processes. Graph illustrates volumetric productivity (VP) and space-time yield (STY) calculated from modeled values in Figure 2. www.advancedsciencenews.com www.biotechnology-journal.com Biotechnol. J. 2019, 14, 1700721
Cited by
Xu, J., Rehmann, M. S., Xu, M., Zheng, S., Hill, C., He, Q., Borys, M., & Li, Z. J. (2020) · Bioresources and Bioprocessing · doi:10.1186/s40643-020-00304-y · Cited by 89
Müller, D., Klein, L., Lemke, J., Schulze, M., Kruse, T., Saballus, M., Matuszczyk, J., Kampmann, M., & Zijlstra, G. (2022) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2021.108727 · Cited by 75
Perfusion culture of Chinese Hamster Ovary cells for bioprocessing applications
MacDonald, M. A., Nöbel, M., Roche Recinos, D., Martínez, V. S., Schulz, B. L., Howard, C. B., Baker, K., Shave, E., Lee, Y. Y., Marcellin, E., et al. (2022) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2021.1998821 · Cited by 55
“Perfusion rates The defining characteristic of a perfusion method is the continuous feed of fresh medium and the removal of a cell free harvest [110].”
BackgroundModel‐based design and control of a small‐scale integrated continuous end‐to‐end mAb platform
Gomis‐Fons, J., Schwarz, H., Zhang, L., Andersson, N., Nilsson, B., Castan, A., Solbrand, A., Stevenson, J., & Chotteau, V. (2020) · Biotechnology Progress · doi:10.1002/btpr.2995 · Cited by 55
Schirmer, C., Maschke, R. W., Pörtner, R., & Eibl, D. (2021) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-021-11180-7 · Cited by 49
End‐to‐end collaboration to transform biopharmaceutical development and manufacturing
Erickson, J., Baker, J., Barrett, S., Brady, C., Brower, M., Carbonell, R., Charlebois, T., Coffman, J., Connell‐Crowley, L., Coolbaugh, M., et al. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.27688 · Cited by 48
Rapid intensification of an established CHO cell fed‐batch process
Schulze, M., Niemann, J., Wijffels, R. H., Matuszczyk, J., & Martens, D. E. (2021) · Biotechnology Progress · doi:10.1002/btpr.3213 · Cited by 36
Mayrhofer, P., Castan, A., & Kunert, R. (2021) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.6848 · Cited by 31
Engineering death resistance in CHO cells for improved perfusion culture
MacDonald, M. A., Nöbel, M., Martínez, V. S., Baker, K. N., Shave, E., Gray, P. P., Mahler, S. M., Munro, T. P., Nielsen, L. K., & Marcellin, E. (2022) · mAbs · doi:10.1080/19420862.2022.2083465 · Cited by 28
Paganini, C., Boyce, H., Libort, G., & Arosio, P. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202202232 · Cited by 27
Mayrhofer, P., Reinhart, D., Castan, A., & Kunert, R. (2019) · Biotechnology Progress · doi:10.1002/btpr.2933 · Cited by 26
Maria, S., Bonneau, L., Fould, B., Ferry, G., Boutin, J. A., Cabanne, C., Santarelli, X., & Joucla, G. (2022) · Biochemical Engineering Journal · doi:10.1016/j.bej.2022.108779 · Cited by 25
Ekpenyong, M. G., Asitok, A. D., Antai, S. P., Ekpo, B. O., Antigha, R., Ogarekpe, N. M., Antai, A., Ogbuagu, U. R., & Ayara, N. (2021) · Preparative Biochemistry & Biotechnology · doi:10.1080/10826068.2020.1830414 · Cited by 24
Model-based intensification of CHO cell cultures: One-step strategy from fed-batch to perfusion
Richelle, A., Corbett, B., Agarwal, P., Vernersson, A., Trygg, J., & McCready, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.948905 · Cited by 22
Wallocha, T., & Popp, O. (2021) · Processes · doi:10.3390/pr9112073 · Cited by 18
Perfusion Cell Culture Processes for Biopharmaceuticals: Process Development, Design, and Scale-up
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209 · Cited by 18
Integrated Continuous Biomanufacturing: Industrialization on the Horizon
Farid, S. S. (2019) · Biotechnology Journal · doi:10.1002/biot.201800722 · Cited by 18
Challenges and Emerging Technologies in Biomanufacturing of Monoclonal Antibodies (mAbs)
McDonnell, S., Principe, R. F., Zamprognio, M. S., & Whelan, J. (2023) · Biomedical engineering · doi:10.5772/intechopen.108565 · Cited by 17
Silva, C. A. T., Kamen, A., & Henry, O. (2023) · Vaccines · doi:10.3390/vaccines11121819 · Cited by 17
Becker, M., Junghans, L., Teleki, A., Bechmann, J., & Takors, R. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.26926 · Cited by 17
Ferreira, K. B., Benlegrimet, A., Diane, G., Pasquier, V., Guillot, R., Poli, M. D., Chappuis, L., Vishwanathan, N., Souquet, J., Broly, H., et al. (2022) · Biotechnology Progress · doi:10.1002/btpr.3259 · Cited by 16
Sun, Y.-N., Shi, C., Zhong, X., Chen, X.-J., Chen, R., Zhang, Q., Yao, S., Jungbauer, A., & Lin, D. (2022) · Journal of Chromatography A · doi:10.1016/j.chroma.2022.463311 · Cited by 16
Tregidgo, M., Lucas, C., Dorn, M., & Micheletti, M. (2023) · Biochemical Engineering Journal · doi:10.1016/j.bej.2023.108906 · Cited by 16
Production of retroviral vectors in continuous high cell density culture
Hein, M. D., Kazenmaier, D., van Heuvel, Y., Dogra, T., Cattaneo, M. V., Kupke, S. Y., Stitz, J., Genzel, Y., & Reichl, U. (2023) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-023-12689-9 · Cited by 16
Romann, P., Kolar, J., Chappuis, L., Herwig, C., Villiger, T. K., & Bielser, J. (2023) · Biochemical Engineering Journal · doi:10.1016/j.bej.2023.108873 · Cited by 15
Repurposing fed‐batch media and feeds for highly productive CHO perfusion processes
Kuiper, M., Spencer, C., Fäldt, E., Vuillemez, A., Holmes, W., Samuelsson, T., Gruber, D., & Castan, A. (2019) · Biotechnology Progress · doi:10.1002/btpr.2821 · Cited by 15
Bielser, J., Kraus, L., Morales, O. B., Broly, H., & Souquet, J. (2020) · Biotechnology Progress · doi:10.1002/btpr.3026 · Cited by 15
Schmitz, F., Knöchelmann, E., Kruse, T., Minceva, M., & Kampmann, M. (2024) · Biotechnology and Bioengineering · doi:10.1002/bit.28695 · Cited by 14
Bielser, J., Aeby, M., Caso, S., Roulet, A., Broly, H., & Souquet, J. (2021) · Biochemical Engineering Journal · doi:10.1016/j.bej.2021.107966 · Cited by 14
Yang, Z., Paes, B. C. M. F., Fulber, J. P. C., Tran, M. Y., Farnós, O., & Kamen, A. (2023) · Vaccines · doi:10.3390/vaccines11040841 · Cited by 13
Bridging process diversity in cell therapies toward standardization of manufacturing workflows
Costa, M. H. G., Carrondo, M. J. T., Alves, P. M., & Serra, M. (2026) · Cytotherapy · doi:10.1016/j.jcyt.2025.102041 · Cited by 12
Shen, M., Bendel, C., Vibbert, H. B., Khine, P. T., Norton, J. R., & Moment, A. J. (2023) · Green Chemistry · doi:10.1039/d3gc02093b · Cited by 12
Ott, V., Ott, J., Eibl, D., & Eibl, R. (2024) · Processes · doi:10.3390/pr12040806 · Cited by 11
Suresh, J., Talib, N. B., Azelee, N. I. W., Rosid, S. J. M., & Toemen, S. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.119568 · Cited by 10
Kongsinkaew, C., Chittapun, S., Piyapittayanun, C., Boonyaratanakornkit, V., Sooksai, S., Ajariyakhajorn, K., Pornpukdeewattana, S., Krusong, W., Laemthong, T., & Charoenrat, T. (2023) · Fermentation · doi:10.3390/fermentation9030277 · Cited by 10
Leong, J., Tang, W. Q., Chng, J., Ler, W. X., Manan, N. A., Sim, L. C., Zheng, Z. Y., Zhang, W., Walsh, I., Zijlstra, G., et al. (2024) · Biotechnology Journal · doi:10.1002/biot.202400092 · Cited by 9
“[2] This rate of culture media entering and exiting the bioreactor can be expressed in vessel volumes per day (vvd − 1 or VVD) and determines nutrient availability.”
Effects of pyruvate on primary metabolism and product quality for a high‐density perfusion process
Caso, S., Aeby, M., Jordan, M., Guillot, R., & Bielser, J. (2022) · Biotechnology and Bioengineering · doi:10.1002/bit.28033 · Cited by 9
Cha, H.-M., Hwang, J.-M., Yeon, J.-H., Lim, J.-H., Han, H., & Kim, D. (2021) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-020-0389-7 · Cited by 7
Process Intensification in Human Pluripotent Stem Cell Expansion with Microcarriers
Teale, M. A., Schneider, S. L., Eibl, D., & Eibl, R. (2024) · Processes · doi:10.3390/pr12030426 · Cited by 6
Zhang, J., Cao, W., Yu, L., Cui, Y., Xu, K., Tian, J., Hogl, S., Kaufmann, H., Zhou, W., & Gu, S. (2024) · Biochemical Engineering Journal · doi:10.1016/j.bej.2024.109476 · Cited by 6
Cultivation strategy optimisation for NK-92 cell line expansion in static conditions
von Werz, V., Szarzynski, A., Mattert, G., Zigon-Branc, S., Dammermann, W., & Spadiut, O. (2026) · BMC Biotechnology · doi:10.1186/s12896-026-01116-2 · Cited by 6
Dorn, M., Lucas, C., Klottrup‐Rees, K., Lee, K. C. L., & Micheletti, M. (2024) · Biotechnology and Bioengineering · doi:10.1002/bit.28685 · Cited by 6
Wiegmann, V., Gardner, R. A., Spencer, D. I. R., & Baganz, F. (2021) · Biotechnology Journal · doi:10.1002/biot.202100360 · Cited by 6
Xu, J., Zheng, S., Dawood, Z., Hill, C., Jin, W., Xu, X., Ding, J. H., Borys, M., Ghose, S., Li, Z. J., et al. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.27723 · Cited by 6
Efficient Bi-enzymatic synthesis of aldonic acids
Tetianec, L., Bratkovskaja, I., Časaitė, V., Gurevičienė, V., Razumienė, J., Stankevičiūtė, J., Meškys, R., Dagys, M., & Laurynėnas, A. (2022) · Green Chemistry · doi:10.1039/d2gc00823h · Cited by 6
Fitzpatrick, J. J., O'Leary, F., Hill, A., Daly, J., Lalor, F., & Byrne, E. P. (2025) · ChemEngineering · doi:10.3390/chemengineering9030048 · Cited by 5
Small-scale perfusion mimic cultures in the ambr250 HT bioreactor system
Rapala, S., Barton, A., & Harcum, S. W. (2024) · Biochemical Engineering Journal · doi:10.1016/j.bej.2024.109332 · Cited by 5
Lucas, C., Blackman, M., Rayat, A., Mainwaring, D., & Micheletti, M. (2024) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10180 · Cited by 4
Tang, Y., Xu, J., Xu, M., Huang, Z., Santos, J., He, Q., Borys, M., & Khetan, A. (2024) · Biotechnology Progress · doi:10.1002/btpr.3446 · Cited by 4
Therapeutic Proteins and Advanced Therapy Medicinal Products
Eppink, M. H. M., Wapenaar, M., Crommelin, D. J. A., Hawe, A., Giezen, T. J., Black, A., & Tam, A. (2023) · Springer eBooks · doi:10.1007/978-3-031-20298-8_24 · Cited by 4
Vu, J., Gadberry, J. A., Coffman, J., & Lee, K. C. L. (2024) · Biotechnology Progress · doi:10.1002/btpr.3472 · Cited by 4
Wolf, M., & Morbidelli, M. (2019) · Methods in molecular biology · doi:10.1007/978-1-0716-0191-4_8 · Cited by 4
Reķēna, A., Livkisa, D., Kamolins, E., Vanags, J., & Loča, D. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.751538 · Cited by 4
Large-Scale Expansion of Suspension Cells in an Automated Hollow-Fiber Perfusion Bioreactor
Bräuchle, E., Knaub, M., Weigand, L., Ehrend, E., Manns, P., Kremer, A., Fabre, H., & Bonig, H. B. (2025) · Bioengineering · doi:10.3390/bioengineering12060644 · Cited by 3
Eukaryotic Expression Systems for Upstream Processing of Monoclonal Antibodies
Heistinger, L., Reinhart, D., Mattanovich, D., & Kunert, R. (2020) · Learning materials in biosciences · doi:10.1007/978-3-030-54630-4_13 · Cited by 3
Improving outcomes in intensified processing via optimization of the cell line development workflow
Balassi, V., Otto, M., Kretzmer, C., Petersen, A. N., McLaurin, C., Mahadevan, J., Gustin, J. A., Borgschulte, T., & Razafsky, D. S. (2025) · Biotechnology Progress · doi:10.1002/btpr.70003 · Cited by 2
Scale-Down Models and Sensors for Process Development
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.003 · Cited by 2
Perfusion Mammalian Cell Culture for Recombinant Protein Manufacturing
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.001 · Cited by 2
Process intensification for CHO cell biomanufacturing
Schulze, M. (2023) · doi:10.18174/585711 · Cited by 2
A novel cultivation strategy to recover NK cell cytotoxicity
von Werz, V., Szarzynski, A., Hadrbolec, M., Mattert, G., Zigon-Branc, S., Kozma, B., Dammermann, W., & Spadiut, O. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1797129 · Cited by 1
Budiyati, A. D., & Pawitan, J. A. (2020) · International Journal of Applied Pharmaceutics · doi:10.22159/ijap.2020v12i4.37244 · Cited by 1
Design and Optimisation of Mammalian Cell Perfusion Cultures
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.004 · Cited by 1
Bioprocess design of a PHB production plant
Bistué-Rovira, M., Martínez, C. M., Reyes, M. M., & Pérez‐Rubio, P. (2019) · Dipòsit Digital de Documents de la UAB (Universitat Autònoma de Barcelona) · Cited by 1
Romann, P. (2023) · reposiTUm (TU Wien) · doi:10.34726/hss.2023.102142 · Cited by 1
Perfusion Bioreactors:The Set-Up and Process Characterisation
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.002
Clinical- and Commercial-Scale Reactors
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.005
Mechanistic and Statistical Modelling of Bioprocesses
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.006
Wolf, M., Bielser, J., & Morbidelli, M. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108847209.007
Wei, J., Liu, Y., Sun, Y., Bai, J., Gao, H., Yang, Z., & Pan, L. (2024) · Chemistry - A European Journal · doi:10.1002/chem.202304319
Ito, T., Nihei, T., Yamamoto, K. I., Watanabe, N., Tokieda, Y., Masuda, Y., & Okada, M. (2025) · Biotechnology and Bioengineering · doi:10.1002/bit.29021
Becker, M. (2019) · OPUS Publication Server of the University of Stuttgart (University of Stuttgart) · doi:10.18419/opus-10917
Optimierung und Digitalisierung eines CHO-Zellkulturprozesses für die rekombinante mAb-Produktion
Richter, J. (2025) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/18715
Alves Tottoli E. Silva, C. A. (2024) · PolyPublie (École Polytechnique de Montréal)
Advanced downstream processing of monoclonal antibodies using membrane chromatography
Schmitz, F., Minceva, M., & München, T. U. (2025) · mediaTUM (Technical University of Munich)
Gkoutzioupa, V. (2024) · UCL Discovery (University College London)
Biotechnology, 6. Mammalian Cell Culture Technology
Kunert, R. (2026) · Wiley eBooks · doi:10.1002/14356007.n04_n06.pub2
A scalable acetate-to-food biomanufacturing platform using synthetic consortiaPreprint
Mishra, S., Augusto, L., Bhagwat, S. S., Ye, J., Bari, N., Nguyen, D. N., Xie, Z., Zhengyong, Z., Das, M., Jia, Y., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6595420
Bioprocessing method is a critical factor for IgM oligomerization
Üzülmez, Ö., Hawlin, V., John, M. M., Stadlbauer, K., Hennicke, J., Hunjadi, M., Wozniak-Knopp, G., & Kunert, R. (2026) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-026-13989-6
Campos-Newman, J. A. (2026) · ITESO Institutional Repository (ReI) (Western Institute of Technology and Higher Education)
Ran, Q., & Tan, W. (2026) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2026.08.008
Mainali, P., Tan, J. H., Ho, P. L., Chua, M., Chua, J., & Ow, D. S. (2026) · Microorganisms · doi:10.3390/microorganisms14102191
Process intensification for production of Adenovirus-like particles (ADDomer) as snake-bite therapy
Hurisa, B., Correia, R., Berger, I., Schaffitzel, C., Mulate, Y. W., Alves, P. M., & Roldão, A. (2026) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2026.09.009
Selective Lithium Recovery from Spent Lithium Iron Phosphate Batteries Used in Solar Energy Storage
Nyambeni, N., Bazhko, V., Mulwanda, J., & Ramakokovhu, M. M. (2026) · Batteries · doi:10.3390/batteries12090367
Integrated Continuous Biomanufacturing of Recombinant Adeno-Associated VirusPreprint
Plieninger, R., Mueller, J. M., Tobler, D., Saygili, E., Werder, P., Higuchi, Y., Takahashi, R., Vogg, S., Müller‐Späth, T., Goebel, S., et al. (2026) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.64898/2026.09.14.751635
Monteiro, M., Bediako, S., Tecson, R., Nierode, G. J., Kotidis, P., & Kontoravdi, C. (2026) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.64898/2026.10.28.762476
Dias, V. A. T., Netto, R. J. A., Barrence, F. A. C., Taniwaki, N. N., de Araújo, A. P. P., Jorge, S. A. C., Astray, R. M., Bernardino, T. C., & Núñez, E. G. F. (2026) · Virology · doi:10.1016/j.virol.2026.111139
A review of the inhibitory waste metabolites produced during mAb biomanufacturing
Wang, Z., Morris, C. S., Hoang, D. M., Xu, J., Borys, M., & Yoon, S. (2026) · Biotechnology Progress · doi:10.1002/btpr.88567
Richelle, A., Corbett, B., Agarwal, P., Vernersson, A., Trygg, J., & McCready, C. (2022) · doi:10.3389/fbioe.2022.948905.s001
Metadata
- Authors
- Bausch, M., Schultheiss, C., & Sieck, J. B.
- Affiliations
- Merck KGaA, Darmstadt (Germany) (DE)
- Corresponding author
- Sieck, Jochen B.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2018-08-14
- Volume
- 14
- Issue
- 2
- Pages
- e1700721-e1700721
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W2884264646
- Cited by
- 73
- References
- 13
- Citations by year
- 2026: 6 · 2025: 5 · 2024: 12 · 2023: 9 · 2022: 9 · 2021: 13 · 2020: 14 · 2019: 5
- FWCI
- 2.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Biotechnology Journal (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Viral Infectious Diseases and Gene Expression in Insects
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Fluid Dynamics and Mixing
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein purification and stability
- Keywords
- fed-batch operation, volumetric productivity, productivity comparison, continuous bioprocessing, biopharmaceutical manufacturing
- MeSH terms
- Animals, Antibodies, Monoclonal, Biopharmaceutics, Cell Count, Cricetulus, Culture Media, Models, Theoretical, CHO Cells, Bioreactors, Batch Cell Culture Techniques
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.