The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Development, parallelization, and automation of a gas‐inducing milliliter‐scale bioreactor for high‐throughput bioprocess design (HTBD)
Abstract
A novel milliliter‐scale bioreactor equipped with a gas‐inducing impeller was developed with oxygen transfer coefficients as high as in laboratory and industrial stirred‐tank bioreactors. The bioreactor reaches oxygen transfer coefficients of >0.4 s−1. Oxygen transfer coefficients of >0.2 s−1 can be maintained over a range of 8‐ to 12‐mL reaction volume. A reaction block with integrated heat exchangers was developed for 48‐mL‐scale bioreactors. The block can be closed with a single gas cover spreading sterile process gas from a central inlet into the headspace of all bioreactors. The gas cover simultaneously acts as a sterile barrier, making the reaction block a stand‐alone device that represents an alternative to 48 parallel‐operated shake flasks on a much smaller footprint. Process control software was developed to control a liquid‐handling system for automated sampling, titration of pH, substrate feeding, and a microtiter plate reader for automated atline pH and atline optical density analytics. The liquid‐handling parameters for titration agent, feeding solution, and cell samples were optimized to increase data quality. A simple proportional pH‐control algorithm and intermittent titration of pH enabled Escherichia coli growth to a dry cell weight of 20.5 g L−1 in fed‐batch cultivation with air aeration. Growth of E. coli at the milliliter scale (10 mL) was shown to be equivalent to laboratory scale (3 L) with regard to growth rate, μ, and biomass yield, Y XS. © 2005 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to advantages and problems of shaken cultures
Büchs, J. (2001) · Biochemical Engineering Journal · doi:10.1016/s1369-703x(00)00106-6 · Cited by 388
Cited by
Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications
Steinegger, A., Wolfbeis, O. S., & Borisov, S. M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00451 · Cited by 622
Kensy, F., Zang, E., Faulhammer, C., Tan, R.-K., & Büchs, J. (2009) · Microbial Cell Factories · doi:10.1186/1475-2859-8-31 · Cited by 253
Wechselberger, P., Sagmeister, P., & Herwig, C. (2013) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-012-0848-4 · Cited by 102
Vallejos, J. R., Brorson, K. A., Moreira, A. R., & Rao, G. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22649 · Cited by 21
Morschett, H., Schiprowski, D., Müller, C., Mertens, K., Felden, P., Meyer, J., Wiechert, W., & Oldiges, M. (2017) · Biotechnology and Bioengineering · doi:10.1002/bit.26051 · Cited by 19
Metadata
- Authors
- Puskeiler, R., Kaufmann, K., & Weuster‐Botz, D.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2005-01-24
- Volume
- 89
- Issue
- 5
- Pages
- 512-523
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W1968260132
- Cited by
- 171
- References
- 1
- FWCI
- 9.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development, parallelization, and automation of a gas‐inducing milliliter‐scale bioreactor for high‐throughput bioprocess design (HTBD). https://app.cochat.ai/papers/10.1002/bit.20352
- The paper
- Puskeiler, R., Kaufmann, K., & Weuster‐Botz, D. (2005). Development, parallelization, and automation of a gas‐inducing milliliter‐scale bioreactor for high‐throughput bioprocess design (HTBD). Biotechnology and Bioengineering. https://doi.org/10.1002/bit.20352
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.