Prediction of gas‐liquid mass transfer coefficient in sparged stirred tank bioreactors
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Oxygen mass transfer in sparged stirred tank bioreactors has been studied. The rate of oxygen mass transfer into a culture in a bioreactor is affected by operational conditions and geometrical parameters as well as the physicochemical properties of the medium (nutrients, substances excreted by the micro‐organism, and surface active agents that are often added to the medium) and the presence of the micro‐organism. Thus, oxygen mass transfer coefficient values in fermentation broths often differ substantially from values estimated for simple aqueous solutions. The influence of liquid phase physicochemical properties on k La must be divided into the influence on kL and a, because they are affected in different ways. The presence of micro‐organisms (cells, bacteria, or yeasts) can affect the mass transfer rate, and thus kLa values, due to the consumption of oxygen for both cell growth and metabolite production. In this work, theoretical equations for kLa prediction, developed for sparged and stirred tanks, taking into account the possible oxygen mass transfer enhancement due to the consumption by biochemical reactions, are proposed. The estimation of k La is carried out taking into account a strong increase of viscosity broth, changes in surface tension and different oxygen uptake rates (OURs), and the biological enhancement factor, E, is also estimated. These different operational conditions and changes in several variables are performed using different systems and cultures (xanthan aqueous solutions, xanthan production cultures by Xanthomonas campestris, sophorolipids production by Candida bombicola, etc.). Experimental and theoretical results are presented and compared, with very good results. © 2005 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kawase, Y., Halard, B., & Moo-Young, M. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80165-3 · Cited by 224
Cited by
Bioreactor scale-up and oxygen transfer rate in microbial processes: An overview
Garcia-Ochoa, F., & Gomez, E. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.10.006 · Cited by 1,504
Self-citationLi, X., Xu, H., & Wu, Q. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21489 · Cited by 525
Oxygen uptake rate in microbial processes: An overview
Garcia-Ochoa, F., Gomez, E., Santos, V. E., & Merchuk, J. C. (2010) · Biochemical Engineering Journal · doi:10.1016/j.bej.2010.01.011 · Cited by 511
Garcia-Ochoa, F., Gomez, E., Alcon, A., & Santos, V. E. (2013) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-012-0825-y · Cited by 52
“In the case of non-Newtonian, an effective viscosity can be used [49].”
Method
Metadata
- Authors
- Garcia‐Ochoa, F., & Gomez, E.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2005-09-09
- Volume
- 92
- Issue
- 6
- Pages
- 761-772
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2081195689
- Cited by
- 102
- References
- 1
- FWCI
- 2.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.