The DOI matches its Crossref record.
In situ product recovery of n‐butanol using polymeric resins
Abstract
Polymeric resins with high n‐butanol adsorption affinities were identified from a candidate pool of commercially available materials representing a wide array of physical and chemical properties. Resin hydrophobicity, which was dictated by the chemical structure of its constituent monomer units, most greatly influenced the resin‐aqueous equilibrium partitioning of n‐butanol whereas ionic functionalization appeared to have no effect. In general, those materials derived from poly(styrene‐co‐divinylbenzene) possessed the greatest n‐butanol affinity, while the adsorption potential of these resins was limited by their specific surface area. Resins were tested for their ability to serve as effective in situ product recovery (ISPR) devices in the n‐butanol fermentation by Clostridium acetobutylicum ATCC 824. In small‐scale batch fermentations, the addition of 0.05 kg/L Dowex® Optipore SD‐2 facilitated achievement of effective n‐butanol titers as high as 2.22% (w/v), well above the inhibitory threshold of C. acetobutylicum ATCC 824, and nearly twice that of traditional, single‐phase fermentations. Retrieval of n‐butanol from resins via thermal treatment was demonstrated with high efficiency and predicted to be economically favorable. Due to its modular nature, the proposed ISPR design exhibits strong potential for compatibility with future n‐butanol fermentation efforts. Biotechnol. Bioeng. 2009; 102: 811–821. © 2008 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zeolites in Adsorption Processes: State of the Art and Future Prospects
Pérez-Botella, E., Valencia, S., & Rey, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00140 · Cited by 1,126
Separation techniques in butanol production: Challenges and developments
Abdehagh, N., Tezel, F. H., & Thibault, J. (2014) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.10.003 · Cited by 284
Butanol production from renewable biomass by clostridia
Jang, Y.-S., Malaviya, A., Cho, C., Lee, J., & Lee, S. Y. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.07.104 · Cited by 274
Styrene biosynthesis from glucose by engineered E. coli
McKenna, R., & Nielsen, D. R. (2011) · Metabolic Engineering · doi:10.1016/j.ymben.2011.06.005 · Cited by 264
Self-citationBaez, A., Cho, K.-M., & Liao, J. C. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-011-3173-y · Cited by 255
Vamsi Krishna, K., Bharathi, N., George Shiju, S., Alagesan Paari, K., & Malaviya, A. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-20637-9 · Cited by 51
Metadata
- Authors
- Nielsen, D. R., & Prather, K. J.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2008-10
- Volume
- 102
- Issue
- 3
- Pages
- 811-821
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W1979527926
- Cited by
- 176
- References
- 0
- FWCI
- 3.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.