Calorimetric investigation of aerobic fermentations
Open accessThe DOI matches its Crossref record.
Abstract
A modified bench scale calorimeter has been employed to determine the heat generated by various microbial strains growing on a range of different substrates, covering degrees of reduction from 3 to 6.13. The results are analyzed, and interpreted in the light of coupled enthalpy and elemental balances. The heat released by the microbial cultures has been found to correlate linearly with other process variables, such as biomass generation and oxygen uptake. The ratio between the heat generated and the biomass formed, the so‐called “heat yield” (YQ/x), has been shown both on theoretical and experimental grounds to increase with increasing degree of reduction of the substrate and to decrease with increasing biomass yield. The two effects could be combined into a simple model which permits the amount of heat released per unit of biomass formed to be predicted from the degree of reduction of the substrate as the only independent variable. The ratio between the heat generated and the oxygen taken up was constant at 440 kJ (mol O 2)−1 throughout all experiments as expected from theoretical considerations for strongly aerobic processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tijhuis, L., Van Loosdrecht, M. C. M., & Heijnen, J. J. (1993) · Biotechnology and Bioengineering · doi:10.1002/bit.260420415 · Cited by 282
Progress in monitoring, modeling and control of bioprocesses during the last 20 years
Schügerl, K. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(00)00361-8 · Cited by 278
Sensor systems for bioprocess monitoring
Biechele, P., Busse, C., Solle, D., Scheper, T., & Reardon, K. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201500014 · Cited by 224
Liu, J. ‐., Marison, I. W., & von Stockar, U. (2001) · Biotechnology and Bioengineering · doi:10.1002/bit.1176 · Cited by 57
Self-citationExpanded thermodynamic true yield prediction model: adjustments and limitations
Xiao, J., & VanBriesen, J. M. (2008) · Biodegradation · doi:10.1007/s10532-007-9119-5 · Cited by 23
Metadata
- Authors
- Birou, B., Marison, I. W., & Stockar, U. V.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 1987-10-05
- Volume
- 30
- Issue
- 5
- Pages
- 650-660
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2029149445
- Cited by
- 121
- References
- 0
- FWCI
- 4.65
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.