CoChat

Establishing the scalable manufacture of primary human T‐cells in an automated stirred‐tank bioreactor

Open access
Costariol, Elena, Rotondi, Marco, Amini, Arman, Hewitt, Christopher J., Nienow, Alvin W., Heathman, Thomas R.J., Micheletti, Martina, Rafiq, Qasim A. · 2019 · Biotechnology and Bioengineering
Cited by 40

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

Advanced cell and gene therapies such as chimeric antigen receptor T‐cell immunotherapies (CAR‐T), present a novel therapeutic modality for the treatment of acute and chronic conditions including acute lymphoblastic leukemia and non‐Hodgkin lymphoma. However, the development of such immunotherapies requires the manufacture of large numbers of T‐cells, which remains a major translational and commercial bottleneck due to the manual, small‐scale, and often static culturing systems used for their production. Such systems are used because there is an unsubstantiated concern that primary T‐cells are shear sensitive, or prefer static conditions, and therefore do not grow as effectively in more scalable, agitated systems, such as stirred‐tank bioreactors, as compared with T‐flasks and culture bags. In this study, we demonstrate that not only T‐cells can be cultivated in an automated stirred‐tank bioreactor system (ambr® 250), but that their growth is consistently and significantly better than that in T‐flask static culture, with equivalent cell quality. Moreover, we demonstrate that at progressively higher agitation rates over the range studied here, and thereby, higher specific power inputs (P/M W kg−1), the higher the final viable T‐cell density; that is, a cell density of 4.65 ± 0.24 × 10 6 viable cells ml−1 obtained at the highest P/M of 74 × 10−4 W kg−1 in comparison with 0.91 ± 0.07 × 10 6 viable cells ml−1 at the lowest P/M of 3.1 × 10−4 W kg−1. We posit that this improvement is due to the inability at the lower agitation rates to effectively suspend the Dynabeads®, which are required to activate the T‐cells; and that contact between them is improved at the higher agitation rates. Importantly, from the data obtained, there is no indication that T‐cells prefer being grown under static conditions or are sensitive to fluid dynamic stresses within a stirred‐tank bioreactor system at the agitation speeds investigated. Indeed, the opposite has proven to be the case, whereby, the cells grow better under higher agitation speeds while maintaining their quality. This study is the first demonstration of primary T‐cell ex vivo manufacture activated by Dynabeads® in an automated stirred‐tank bioreactor system such as the ambr® 250 and the findings have the potential to be applied to multiple other cell candidates for advanced therapy applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/bit.27088

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 40

Metadata

Authors
Costariol, E., Rotondi, M., Amini, A., Hewitt, C. J., Nienow, A. W., Heathman, T. R. J., Micheletti, M., & Rafiq, Q. A.
Venue
Biotechnology and Bioengineering
Publisher
Wiley
Published
2019-07-09
Volume
116
Issue
10
Pages
2488-2502
ISSN
  • 0006-3592 (ISSN-L)
  • 1097-0290
OpenAlex
W2951554930
Cited by
40
References
2
FWCI
1.49
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.