Process model comparison and transferability across bioreactor scales and modes of operation for a mammalian cell bioprocess
The DOI matches its Crossref record.
Abstract
A Monod kinetic model, logistic equation model, and statistical regression model were developed for a Chinese hamster ovary cell bioprocess operated under three different modes of operation (batch, bolus fed‐batch, and continuous fed‐batch) and grown on two different bioreactor scales (3 L bench‐top and 15 L pilot‐scale). The Monod kinetic model was developed for all modes of operation under study and predicted cell density, glucose glutamine, lactate, and ammonia concentrations well for the bioprocess. However, it was computationally demanding due to the large number of parameters necessary to produce a good model fit. The transferability of the Monod kinetic model structure and parameter set across bioreactor scales and modes of operation was investigated and a parameter sensitivity analysis performed. The experimentally determined parameters had the greatest influence on model performance. They changed with scale and mode of operation, but were easily calculated. The remaining parameters, which were fitted using a differential evolutionary algorithm, were not as crucial. Logistic equation and statistical regression models were investigated as alternatives to the Monod kinetic model. They were less computationally intensive to develop due to the absence of a large parameter set. However, modeling of the nutrient and metabolite concentrations proved to be troublesome due to the logistic equation model structure and the inability of both models to incorporate a feed. The complexity, computational load, and effort required for model development has to be balanced with the necessary level of model sophistication when choosing which model type to develop for a particular application. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Kornecki, M., & Strube, J. (2018) · Bioengineering · doi:10.3390/bioengineering5010025 · Cited by 61
“Literature data were determined using fed-batch CHO cell culture and the markov chain monte carlo method for parameter estimation [49] or by the differential evolution technique [50].”
MethodModel-based intensification of CHO cell cultures: One-step strategy from fed-batch to perfusion
Richelle, A., Corbett, B., Agarwal, P., Vernersson, A., Trygg, J., & McCready, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.948905 · Cited by 22
Ruiz-Molina, N., Parsons, J., Schroeder, S., Posten, C., Reski, R., & Decker, E. L. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.837965 · Cited by 14
Dynamic pH profiles drive higher cell‐specific and volumetric productivity
Klaubert, S. R., Chitwood, D. G., Peng, D., Redman, E., Anderson, J. Y. L., Sandoval, N. R., & Harcum, S. W. (2026) · Biotechnology Progress · doi:10.1002/btpr.70080 · Cited by 3
Metadata
- Authors
- Craven, S., Shirsat, N., Whelan, J., & Glennon, B.
- Venue
- Biotechnology Progress
- Publisher
- Wiley
- Published
- 2012-12-20
- Volume
- 29
- Issue
- 1
- Pages
- 186-196
- ISSN
- 1520-6033 (ISSN-L)
- 8756-7938
- OpenAlex
- W2052859646
- Cited by
- 57
- References
- 0
- FWCI
- 0.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.