The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Immobilized Transition Metals as Catalysts for Cross‐Couplings in Continuous Flow—A Critical Assessment of the Reaction Mechanism and Metal Leaching
Abstract
In the not too distant future many industrially important chemicals (including pharmaceuticals) will probably be manufactured using continuous flow technology. For a significant number of synthetic steps involved in these protocols transition metal (mostly palladium)‐catalyzed carbon–carbon or carbon–heteroatom bond forming reactions (“cross‐coupling chemistry”) will play an important role. Designing a process for continuous cross‐coupling chemistry involves either the use of a homogeneous or of a heterogeneous (immobilized) catalyst/ligand system. In the latter case, the catalyst/ligand system is typically in the form of a packed‐bed reactor, through which the reaction mixture is pumped, employing an appropriate temperature regime and residence time. Although this approach has been widely popular during the past 15 years, there is growing evidence that suggests that the use of immobilized transition metal catalysts for performing cross‐coupling chemistry in continuous flow is, in fact, not very practical. As demonstrated in this review, significant leaching of the transition metal out of the packed‐bed catalyst will almost inevitably occur, leading to decreased catalyst activity and contamination of the product with transition metal. This is a consequence of the well‐known fact that the reaction mechanism for these kinds of transformations is (quasi)homogeneous and involves the transformation of a Pd 0 species into a (soluble) Pd II species. Using an immobilized catalyst in a batch protocol the transient leaching of palladium will not be immediately obvious, as, after completion of the catalytic cycle, Pd 0 will typically redeposit onto the support. In contrast, in continuous flow mode, the palladium metal will progressively be “chromatographed” through the packed‐bed catalyst until, ultimately, all palladium will be removed from the support. This effect typically will become only evident when long run experiments are performed. The preferred alternative, in particular for larger scale experiments, is to use a homogeneous (pre)catalyst in combination with an appropriate catalyst recycling technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Continuous flow reactors: a perspective
Wiles, C., & Watts, P. (2012) · Green Chem. · doi:10.1039/c1gc16022b · Cited by 626
Cited by
The Hitchhiker’s Guide to Flow Chemistry
Plutschack, M. B., Pieber, B., Gilmore, K., & Seeberger, P. H. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00183 · Cited by 1,995
Continuous‐Flow Technology—A Tool for the Safe Manufacturing of Active Pharmaceutical Ingredients
Gutmann, B., Cantillo, D., & Kappe, C. O. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409318 · Cited by 1,469
Self-citationPd Metal Catalysts for Cross-Couplings and Related Reactions in the 21st Century: A Critical Review
Biffis, A., Centomo, P., Del Zotto, A., & Zecca, M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00443 · Cited by 1,355
Flow Chemistry: Recent Developments in the Synthesis of Pharmaceutical Products
Porta, R., Benaglia, M., & Puglisi, A. (2016) · Organic Process Research & Development · doi:10.1021/acs.oprd.5b00325 · Cited by 886
Liquid phase oxidation chemistry in continuous-flow microreactors
Gemoets, H. P. L., Su, Y., Shang, M., Hessel, V., Luque, R., & Noël, T. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00447k · Cited by 494
Why Does Industry Not Use Immobilized Transition Metal Complexes as Catalysts?
Hübner, S., de Vries, J. G., & Farina, V. (2016) · Advanced Synthesis & Catalysis · doi:10.1002/adsc.201500846 · Cited by 449
Zaera, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00905 · Cited by 425
Supported Catalysis in Continuous‐Flow Microreactors
Munirathinam, R., Huskens, J., & Verboom, W. (2015) · Advanced Synthesis & Catalysis · doi:10.1002/adsc.201401081 · Cited by 347
Metadata
- Authors
- Cantillo, D., & Kappe, C. O.
- Venue
- ChemCatChem
- Publisher
- Wiley
- Published
- 2014-09-09
- Volume
- 6
- Issue
- 12
- Pages
- 3286-3305
- ISSN
- 1867-3880 (ISSN-L)
- 1867-3899
- OpenAlex
- W2144849305
- Cited by
- 200
- References
- 1
- FWCI
- 10.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.