Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 200

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Immobilized Transition Metals as Catalysts for Cross‐Couplings in Continuous Flow—A Critical Assessment of the Reaction Mechanism and Metal Leaching

Cantillo, David, Kappe, C. Oliver · 2014 · ChemCatChem

Abstract

In the not too distant future many industrially important chemicals (including pharmaceuticals) will probably be manufactured using continuous flow technology. For a significant number of synthetic steps involved in these protocols transition metal (mostly palladium)‐catalyzed carbon–carbon or carbon–heteroatom bond forming reactions (“cross‐coupling chemistry”) will play an important role. Designing a process for continuous cross‐coupling chemistry involves either the use of a homogeneous or of a heterogeneous (immobilized) catalyst/ligand system. In the latter case, the catalyst/ligand system is typically in the form of a packed‐bed reactor, through which the reaction mixture is pumped, employing an appropriate temperature regime and residence time. Although this approach has been widely popular during the past 15 years, there is growing evidence that suggests that the use of immobilized transition metal catalysts for performing cross‐coupling chemistry in continuous flow is, in fact, not very practical. As demonstrated in this review, significant leaching of the transition metal out of the packed‐bed catalyst will almost inevitably occur, leading to decreased catalyst activity and contamination of the product with transition metal. This is a consequence of the well‐known fact that the reaction mechanism for these kinds of transformations is (quasi)homogeneous and involves the transformation of a Pd 0 species into a (soluble) Pd II species. Using an immobilized catalyst in a batch protocol the transient leaching of palladium will not be immediately obvious, as, after completion of the catalytic cycle, Pd 0 will typically redeposit onto the support. In contrast, in continuous flow mode, the palladium metal will progressively be “chromatographed” through the packed‐bed catalyst until, ultimately, all palladium will be removed from the support. This effect typically will become only evident when long run experiments are performed. The preferred alternative, in particular for larger scale experiments, is to use a homogeneous (pre)catalyst in combination with an appropriate catalyst recycling technology.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/cctc.201402483

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 200

Metadata

Authors
Cantillo, D., & Kappe, C. O.
Venue
ChemCatChem
Publisher
Wiley
Published
2014-09-09
Volume
6
Issue
12
Pages
3286-3305
ISSN
  • 1867-3880 (ISSN-L)
  • 1867-3899
OpenAlex
W2144849305
Cited by
200
References
1
FWCI
10.70
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.