The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Methylammonium Bismuth Iodide as a Lead‐Free, Stable Hybrid Organic–Inorganic Solar Absorber
Abstract
Methylammonium lead halide (MAPbX 3) perovskites exhibit exceptional carrier transport properties. But their commercial deployment as solar absorbers is currently limited by their intrinsic instability in the presence of humidity and their lead content. Guided by our theoretical predictions, we explored the potential of methylammonium bismuth iodide (MBI) as a solar absorber through detailed materials characterization. We synthesized phase‐pure MBI by solution and vapor processing. In contrast to MAPbX 3, MBI is air stable, forming a surface layer that does not increase the recombination rate. We found that MBI luminesces at room temperature, with the vapor‐processed films exhibiting superior photoluminescence (PL) decay times that are promising for photovoltaic applications. The thermodynamic, electronic, and structural features of MBI that are amenable to these properties are also present in other hybrid ternary bismuth halide compounds. Through MBI, we demonstrate a lead‐free and stable alternative to MAPbX 3 that has a similar electronic structure and nanosecond lifetimes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F. (1995) · Medical Entomology and Zoology · Cited by 23,662
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Self-citationHigh-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Self-citation2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Miyata, A., Mitioglu, A., Plochocka, P., Portugall, O., Wang, J. T.-W., Stranks, S. D., Snaith, H. J., & Nicholas, R. J. (2015) · Nature Physics · doi:10.1038/nphys3357 · Cited by 2,085
Self-citationA Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Self-citationBismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Aristidou, N., Sanchez‐Molina, I., Chotchuangchutchaval, T., Brown, M., Martinez, L., Rath, T., & Haque, S. A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503153 · Cited by 969
Brandt, R. E., Stevanović, V., Ginley, D. S., & Buonassisi, T. (2015) · MRS Communications · doi:10.1557/mrc.2015.26 · Cited by 817
Self-citationYu, L., & Zunger, A. (2012) · Physical Review Letters · doi:10.1103/physrevlett.108.068701 · Cited by 816
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie · doi:10.1002/ange.201406466 · Cited by 684
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
Efficient silicon light-emitting diodes
Green, M. A., Zhao, J., Wang, A., Reece, P. J., & Gal, M. (2001) · Nature · doi:10.1038/35090539 · Cited by 548
Lehner, A. J., Fabini, D. H., Evans, H. A., Hébert, C.-A., Smock, S. R., Hu, J., Wang, H., Zwanziger, J. W., Chabinyc, M. L., & Seshadri, R. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03147 · Cited by 507
Ma, J., & Wang, L.-W. (2015) · Nano Letters · doi:10.1021/nl503494y · Cited by 270
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Aristidou, N., Sanchez‐Molina, I., Chotchuangchutchaval, T., Brown, M., Martinez, L., Rath, T., & Haque, S. A. (2015) · Angewandte Chemie · doi:10.1002/ange.201503153 · Cited by 247
Methylammonium Lead Bromide Perovskite-Based Solar Cells by Vapor-Assisted Deposition
Sheng, R., Ho-Baillie, A., Huang, S., Chen, S., Wen, X., Hao, X., & Green, M. A. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp512936z · Cited by 245
Lone Pair Effect, Structural Distortions, and Potential for Superconductivity in Tl Perovskites
Schoop, L. M., Müchler, L., Felser, C., & Cava, R. J. (2013) · Inorganic Chemistry · doi:10.1021/ic400381g · Cited by 56
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
The rapid evolution of highly efficient perovskite solar cells
Correa-Baena, J.-P., Abate, A., Saliba, M., Tress, W., Jesper Jacobsson, T., Grätzel, M., & Hagfeldt, A. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03397k · Cited by 1,140
From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives
Xiao, Z., Song, Z., & Yan, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803792 · Cited by 1,090
Xiao, Z., Meng, W., Wang, J., Mitzi, D. B., & Yan, Y. (2017) · Materials Horizons · doi:10.1039/c6mh00519e · Cited by 735
Shi, Z., Guo, J., Chen, Y., Li, Q., Pan, Y., Zhang, H., Xia, Y., & Huang, W. (2017) · Advanced Materials · doi:10.1002/adma.201605005 · Cited by 735
Metadata
- Authors
- Hoye, R. L. Z., Brandt, R. E., Osherov, A., Stevanović, V., Stranks, S. D., Wilson, M. W. B., Kim, H., Akey, A. J., Perkins, J. D., Kurchin, R. C., Poindexter, J. R., Wang, E. N., Bawendi, M. G., Bulović, V., & Buonassisi, T.
- Venue
- Chemistry – A European Journal
- Publisher
- Wiley
- Published
- 2016-01-18
- Volume
- 22
- Issue
- 8
- Pages
- 2605-2610
- ISSN
- 0947-6539 (ISSN-L)
- 1521-3765
- OpenAlex
- W2201242154
- Cited by
- 368
- References
- 25
- FWCI
- 20.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.