The direct oxidation of hydrogen sulphide over activated carbons prepared from lignite coal and biochar
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Physically (steam) and chemically (KOH) activated carbons prepared from Luscar coal and biochar were used for removal of low concentrations of hydrogen sulphide (1 mol%) in methane. A modification method including acid treatment and thermal desorption in an inert atmosphere was used and the effects of this modification on the porous structure, surface chemistry, and ash content were studied. It increased total pore volume of activated carbons prepared from coal and biochar by 43% and 11%, respectively. Acid treatment changed the surface chemistry of activated carbons. Also, thermal desorption removed most of the acidic groups, especially carboxylic groups. The break‐through times corresponding to 80% removal of H 2 S using modified activated carbons prepared from coal and biochar were increased to 102 and 131 min, respectively. Also, the production of SO 2 as an undesirable by‐product was less than 1.9% of H 2 S fed into the reactor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Steam and KOH activation of biochar: Experimental and modeling studies
Azargohar, R., & Dalai, A. K. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.06.047 · Cited by 345
Self-citation
Cited by
Characteristics and applications of biochar for environmental remediation: a review
Xie, T., Reddy, K. R., Wang, C., Yargicoglu, E., & Spokas, K. (2015) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2014.924180 · Cited by 527
Xu, X., Zhao, Y., Sima, J., Zhao, L., Mašek, O., & Cao, X. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.023 · Cited by 374
Biochar’s role as an alternative N-fertilizer: Ammonia capture
Spokas, K. A., Novak, J. M., & Venterea, R. T. (2012) · Plant and Soil · doi:10.1007/s11104-011-0930-8 · Cited by 326
Review of the Effects of Biochar Amendment on Soil Properties and Carbon Sequestration
Xie, T., Sadasivam, B. Y., Reddy, K. R., Wang, C., & Spokas, K. (2016) · Journal of Hazardous, Toxic, and Radioactive Waste · doi:10.1061/(asce)hz.2153-5515.0000293 · Cited by 112
“In terms of chemical activation, KOH steamactivation (Azargohar and Dalai 2011; Ippolito et al. 2012) or phosphoric acid impregnation (Lin et al.”
BackgroundPerspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Zhao, C., Ge, L., Mai, L., Li, X., Chen, S., Li, Q., Li, S., Yao, L., Wang, Y., & Xu, C. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c01866 · Cited by 81
Yu, S., Zhang, W., Dong, X., Wang, F., Yang, W., Liu, C., & Chen, D. (2024) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.111638 · Cited by 79
Metadata
- Authors
- Azargohar, R., & Dalai, A. K.
- Venue
- The Canadian Journal of Chemical Engineering
- Publisher
- Wiley
- Published
- 2011-03
- Volume
- 89
- Issue
- 4
- Pages
- 844-853
- ISSN
- 0008-4034 (ISSN-L)
- 1939-019X
- OpenAlex
- W2001358818
- Cited by
- 31
- References
- 1
- FWCI
- 6.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.