Yeast‐Based Microporous Carbon Materials for Carbon Dioxide Capture
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
A hierarchical microporous carbon material with a Brunauer–Emmett–Teller surface area of 1348 m 2 g−1 and a pore volume of 0.67 cm 3 g−1 was prepared from yeast through chemical activation with potassium hydroxide. This type of material contains large numbers of nitrogen‐containing groups (nitrogen content >5.3 wt %), and, consequently, basic sites. As a result, this material shows a faster adsorption rate and a higher adsorption capacity of CO 2 than the material obtained by directly carbonizing yeast under the same conditions. The difference is more pronounced in the presence of N 2 or H 2 O, showing that chemical activation of discarded yeast with potassium hydroxide could afford high‐performance microporous carbon materials for the capture of CO 2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
About reactions occurring during chemical activation with hydroxides
Lillo-Ródenas, M. A., Juan-Juan, J., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.008 · Cited by 389
Hierarchical porous polyacrylonitrile-based activated carbon fibers for CO2 capture
Shen, W., Zhang, S., He, Y., Li, J., & Fan, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12585k · Cited by 154
Self-citation
Cited by
Dutta, S., Bhaumik, A., & Wu, K. C.-W. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01075b · Cited by 1,413
Nitrogen-containing porous carbons: synthesis and application
Shen, W., & Fan, W. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00028h · Cited by 698
Self-citationAdsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Metadata
- Authors
- Shen, W., He, Y., Zhang, S., Li, J., & Fan, W.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2012-06-13
- Volume
- 5
- Issue
- 7
- Pages
- 1274-1279
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2104208357
- Cited by
- 78
- References
- 4
- FWCI
- 11.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.