The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Methanol Fractionation of Softwood Kraft Lignin: Impact on the Lignin Properties
Abstract
The development of technologies to tune lignin properties for high‐performance lignin‐based materials is crucial for the utilization of lignin in various applications. Here, the effect of methanol (MeOH) fractionation on the molecular weight, molecular weight distribution, glass transition temperature (Tg), thermal decomposition, and chemical structure of lignin were investigated. Repeated MeOH fractionation of softwood Kraft lignin successfully removed the low‐molecular‐weight fraction. The separated high‐molecular‐weight lignin showed a Tg of 211 °C and a char yield of 47 %, much higher than those of as‐received lignin (Tg 153 °C, char yield 41 %). The MeOH‐soluble fraction of lignin showed an increased low‐molecular‐weight fraction and a lower Tg (117 °C) and char yield (32 %). The amount of low‐molecular‐weight fraction showed a quantitative correlation with both 1/Tg and char yield in a linear regression. This study demonstrated the efficient purification or fractionation technology for lignin; it also established a theoretical and empirical correlation between the physical characteristics of fractionated lignins.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Holladay, J. E., White, J. F., Bozell, J. J., & Johnson, D. (2007) · doi:10.2172/921839 · Cited by 905
Cited by
Constant, S., Wienk, H. L. J., Frissen, A. E., Peinder, P. D., Boelens, R., van Es, D. S., Grisel, R. J. H., Weckhuysen, B. M., Huijgen, W. J. J., Gosselink, R. J. A., et al. (2016) · Green Chemistry · doi:10.1039/c5gc03043a · Cited by 893
Thermal properties of lignin in copolymers, blends, and composites: a review
Sen, S., Patil, S., & Argyropoulos, D. S. (2015) · Green Chemistry · doi:10.1039/c5gc01066g · Cited by 520
Characterization and analysis of the molecular weight of lignin for biorefining studies
Tolbert, A., Akinosho, H., Khunsupat, R., Naskar, A. K., & Ragauskas, A. J. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1500 · Cited by 504
Self-citationCollins, M. N., Nechifor, M., Tanasă, F., Zănoagă, M., McLoughlin, A., Stróżyk, M. A., Culebras, M., & Teacă, C.-A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.069 · Cited by 486
Lignin‐Derived Advanced Carbon Materials
Chatterjee, S., & Saito, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500692 · Cited by 333
Self-citationThe pros and cons of lignin valorisation in an integrated biorefinery
Strassberger, Z., Tanase, S., & Rothenberg, G. (2014) · RSC Adv. · doi:10.1039/c4ra04747h · Cited by 335
Lignin‐Based Thermoplastic Materials
Wang, C., Kelley, S. S., & Venditti, R. A. (2016) · ChemSusChem · doi:10.1002/cssc.201501531 · Cited by 309
Softwood kraft lignin: Raw material for the future
Gellerstedt, G. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.09.040 · Cited by 287
Lignin-based carbon fibers: Formation, modification and potential applications
Wang, S., Bai, J., Innocent, M. T., Wang, Q., Xiang, H., Tang, J., & Zhu, M. (2022) · Green Energy & Environment · doi:10.1016/j.gee.2021.04.006 · Cited by 280
Lignin-Based Polyurethanes: Opportunities for Bio-Based Foams, Elastomers, Coatings and Adhesives
Alinejad, M., Henry, C., Nikafshar, S., Gondaliya, A., Bagheri, S., Chen, N., Singh, S., Hodge, D., & Nejad, M. (2019) · Polymers · doi:10.3390/polym11071202 · Cited by 272
Fractionation and characterization of industrial lignins
Li, H., & McDonald, A. G. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.08.013 · Cited by 266
Using green γ-valerolactone/water solvent to decrease lignin heterogeneity by gradient precipitation
Wang, G., Liu, X., Yang, B., Si, C., Parvez, A. M., Jang, J., & Ni, Y. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01641 · Cited by 111
Metadata
- Authors
- Saito, T., Perkins, J. H., Vautard, F., Meyer, H. M., Messman, J. M., Tolnai, B., & Naskar, A. K.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2013-11-04
- Volume
- 7
- Issue
- 1
- Pages
- 221-228
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2121573470
- Cited by
- 175
- References
- 1
- FWCI
- 7.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.